I did a key with mini pro and xhorse vvdi mini tools. Write key with super chip on unused spot cause with the used spot can't write file. Car security gets off but car isn't starting. What should I do?
Darius , i thing in this case that is possible VVDI prog to didnt read corect eeprom.It is good for Mcu reading ,but for eeprom job i use it very rarely .Did you compare two dumps after from Vvdi and Zedfull ?
Hello. Good question ! I didn't compare it. May be you are right and the reading of VVDI was not good in this case. But I love this programmer, it is always my first use.
@@schluesseldienst_muzler_de4067 Autel's IM608 doesn't do it, been there and still have issues with the car, I'm going to buy ZedFull Plus just now to see if I can get the car out this week.
Hi Great Video 🙂 Today I take Terios 2004 》 93LC66 》 4c 》 Take Dump File 》import to VVDI2 key making 》import file notice unsupported version notice 😐 I made with Autel + XP400 Still it would be good VVDI2 could write 4c tiris key , did you ever try Terios 4c with VVDI Prog & VVDI2 ?
@@alexfurman4137 you need to FFFF immo box or do FFFF thru obd then insert 2 new 8c transponder and switch on ignition... immobox auto learns new transponder and car start
A friend of mine just did one today and it was successfully done he did not red the eeprom under st he red it under microchip then prepared the chip with vvdi 2
Hello Muhammad. If you do this job in 5 minutes you are not from this world. If you program a key to a car by OBD in 5 minutes you are from this world.
My friend, we have almost the same machine park. Great video!
I did a key with mini pro and xhorse vvdi mini tools. Write key with super chip on unused spot cause with the used spot can't write file. Car security gets off but car isn't starting. What should I do?
Thanks for the video, I wish you success. I have a question: If I scan the Emu Blaze box, is it possible to add a key via the iPod link?
Thank you! finally someone showing where that damned imobilizer was hiding! xD
I also looked for it for a long time.
It's the same place on Daihatsu Trévis?
x prox is reading this eprom wrong, so it doesn't recognize tango and vvdi2 module, if you read it with orange5, you can code key with tango and vvdi2
good job , the reading was wrong simple
zedfull always a great tool.
Yes very helpful tool.
Fantastic! Thanks for your training!
Thank you. Enjoy
Darius , i thing in this case that is possible VVDI prog to didnt read corect eeprom.It is good for Mcu reading ,but for eeprom job i use it very rarely .Did you compare two dumps after from Vvdi and Zedfull ?
Hello. Good question ! I didn't compare it. May be you are right and the reading of VVDI was not good in this case. But I love this programmer, it is always my first use.
Просто супер! Очень, очень круто!!!!
Спасибо. Большой привет России.
Welcome
Is the Mercedes remote programmed?
WinZ W140 S
1998 model
Can you do that
Super bro great bro
Thanks bro
How about using Autel im608 with Xp400 Pro that would work very easy for EEprom Key Write?
Thanks i really like it the video was very helpful.
Hi. Thank you. Yes I think Autel will do that without problems.
@@schluesseldienst_muzler_de4067 Autel's IM608 doesn't do it, been there and still have issues with the car, I'm going to buy ZedFull Plus just now to see if I can get the car out this week.
Is it possible by obd ?
Hi there. Maybe yes. I'm not sure. My tools want to switch on ignition with a "master key" that I don´t have. Looks like Toyota system.
Hi Great Video 🙂 Today I take Terios 2004 》 93LC66 》 4c 》 Take Dump File 》import to VVDI2 key making 》import file notice unsupported version notice 😐 I made with Autel + XP400
Still it would be good VVDI2 could write 4c tiris key , did you ever try Terios 4c with VVDI Prog & VVDI2 ?
Hi thanks. No, this was my only Terios. Someone here told me it is possible to program by OBD. You have to choose PERODUA
Hi
Terios 2001 where is immo located ???
Sure your eeprom is all FFFF
Autel? How? I can't
@@alexfurman4137 you need to FFFF immo box or do FFFF thru obd then insert 2 new 8c transponder and switch on ignition... immobox auto learns new transponder and car start
Most likely vvdi2 should have recognised the file, you should have tried to read eeprom under other brand, microchip, etc..
A friend of mine just did one today and it was successfully done he did not red the eeprom under st he red it under microchip then prepared the chip with vvdi 2
You can read most Eeproms with "ST". The main thing is that it worked. 👍
Easy job. Via OBD. 5 minute. done
Hello Muhammad. If you do this job in 5 minutes you are not from this world. If you program a key to a car by OBD in 5 minutes you are from this world.
In Indonesian. Easy job. Via OBD. Malaysia car. Menu PERODUA
@@schluesseldienst_muzler_de4067 he is actually right. can be reset with 608 under Perodua, diag side. Also, key code on right door lock.