Thanks for the info Gerard, from... Eastern Idaho...pretty sure now thats the problem with my 2000 Ford Tarus...Mechanic at work examined it and said it was...i wasn't so sure because my experience with bearings were rumbles and growling...so your video i believed nailed it...thanks...
Mine is the complete opposite. The faster I go, the less the noise until it eventually disappears. When I slow down, especially when I’m coming to a stop, it gets really loud. Any ideas/suggestions would be greatly appreciated.
Cheers Pat, I was found that to be the most affective way for getting really stubborn ones to move, decreases the % risk of hub damage as well. Thanks for the kind words Pat, I always appreciate ya stopping in 🙏🙏
Hi, I need help. I have a 2013 dodge caravan and it gets louder as I accelerate. I put on new rotors. I took it to a mechanic and he said it was a stabilizer rod. If not a stabilizer rod, what could it be? I don't want to fix a problem if it doesn't need to be fixed. Any help would be greatly appreciated.
Great video. Thank you. I have that same problem on my 2008 ford Expidition. Thought it would be an easy fix. After watching what you had to go through to fix it. Looks like a trip to my mechanic.
I have a 2018 Hyundai Kona. When I go over 45 miles per hour, I hear a rumbling noise which sounds like it is coming from the wheels. I had an alignment completed and the noise is still there. Driving at 45 mph, I don't hear the noise. What could be the problem?
I have a 2010 Honda Accord Crosstour. The humming noise is coming from the front end. As soon as I start driving u hear it. The faster I go the loud it gets. I told it to a professional and they said it was the wheel bearing, wheel hubs and need tires. I replaced the bearing, hubs and 4 new tires. Plus the front and back brakes. The humming noise is still there
I have a Honda frv 2007 auto car drives fine but when on motorway at high speed steering shakes and there’s a constant dubbing sound from front wheel. Had wheels balanced but still the same. Some saying it cold be transmission but I hope not 😅
Good day. I have a mitsubishi grandis 2004 manual 2wd benzine. Having a problem with the car.Whenever i went on a highway and as soon as it reaches 100km. I starts to hear a deep dull grrrr grrrrr grrrr kind of noice coming from the front of the car. Its kind of grinding. If i push throttle to go beyond 100km it disappears until i keep pushing it further but when ever i hold it steady at 100km or above it starts to do that.At speeds lower than 100km i do not here it.. grinding or that grrrrr grrrrr sound comes only when steady.. disengaging gear makes it disapear..Today i went to 120km and at once pushed the clutch padel and kept it pushed. Grinding dispeared. I ride mostly at 100km and its too much irritating having this grrrrrrrrrrrrgrrrrrr noice. Its loud but deep and dull.I can here it if i am at driving or passenger seat. The car do have 1 front brake rotter which is a bit crooked. Could it be that?Today was at a local workshop. The man said cv axles needs to replace but its a hit and trial..Can anyone advise what could it be. ?? Thanks
@@summersifysummers4702 I have a similar problem. My car starts to make a constant dubbing sound in high gear. Had a few hints it might be transmission but nobody’s actually tested it.
I wouldn't recommend it. It depends how bad the bearing is stuck in the hub to if it is even possible without some sort of a press, I have done many in the past that without a press (and heat) you have zero chance of removal, but I have also done some that took very little pressure to get the bearing moving in the press. Best case scenario is if you are doing it at home and you can't get it out, bring it to a workshop and have them press out the old and install the new one 👌👍
Two months ago, I replaced the bearings in my LG Front loading washing machine and it was HELL getting the old bearings out. LOL! I wouldn't even try to do this job at home. Just my two cents. I tackle everything else EXCEPT this.
differential issue, im trying to figure out the same for my 03 suburban, makes a howling noise when i go over 20 mph but when i accelerate the noise goes away until i maintain the same speed (kinda like cruising) it starts to howl and vibrate
No because the tire’s balance is tested and performed when it is off your car, so the tire’s balance will still be the same. But you do need an alignment if you removed the entire knuckle. Otherwise, no alignment or balancing needed.
Hi Gerard, I appreciate for the video, HOWEVER, the $60,000 question is: “WHAT TYPE OF NOISE” associates with the repair (solution) shown in this video. My Nissan Sentra when starts moving it makes strong muffed and continuous noise. I wish your video started with sound of the noise that associates with the repair you presented.
My 2011 Elantra is doing this noise at hover speeds from 60 to 70 mph. On my right side . My struts n inner outer tyrods is replaced . This vlogs helps .
Mine sounds like a jet plane but everything else is fine tho the compressor is also making a little sound too i think the tires are the problem cause my tire rings are in bad shape ive seen 2 mechanics and one other guy and they all say diff. Stuff 😒😒😒 irs driving me nuts!!!
Great to see the work done and the processes involved. Pity you aren’t back in Ireland or I’d be popping in for many’s the job!
Cheers Ronan, I appreciate that 🙏🙏
Excellent description of the process as usual. Thanks Gerard.
Really appreciate the kind words 🙏🙏 Thank you
Thanks for the info Gerard, from... Eastern Idaho...pretty sure now thats the problem with my 2000 Ford Tarus...Mechanic at work examined it and said it was...i wasn't so sure because my experience with bearings were rumbles and growling...so your video i believed nailed it...thanks...
Mine is the complete opposite. The faster I go, the less the noise until it eventually disappears. When I slow down, especially when I’m coming to a stop, it gets really loud. Any ideas/suggestions would be greatly appreciated.
I have the same problem, any help would be appreciated
Same
@@amyjones1417 my problem turned out to be that I needed my tires rotated and balanced. I had gone a few years without doing that. 😅😅😅
@@davidcordon6253 my problem turned out to be that I needed my tires rotated and balanced.
I had same noise. Nothing loose underneath, however, the noise gone after pumped more air and balanced the pressure of tires.
Great tip that Gerard on the two stage pushing out the bearing, on the solid first to break it, Thankyou:):)
Cheers Pat, I was found that to be the most affective way for getting really stubborn ones to move, decreases the % risk of hub damage as well.
Thanks for the kind words Pat, I always appreciate ya stopping in 🙏🙏
@@GerardBurkeBurkesGarage No worries Gerard, and Thank you 👍👍😷
Hi, I need help. I have a 2013 dodge caravan and it gets louder as I accelerate. I put on new rotors. I took it to a mechanic and he said it was a stabilizer rod. If not a stabilizer rod, what could it be? I don't want to fix a problem if it doesn't need to be fixed. Any help would be greatly appreciated.
Great video. Thank you. I have that same problem on my 2008 ford Expidition. Thought it would be an easy fix. After watching what you had to go through to fix it. Looks like a trip to my mechanic.
🙏🙏
The disks have 2 holes in them to put longer bolts in them that push it of the back plate
I had my wheel bearing and cv joints changed and there is still a humming noise when I am in speeds between 55-70 ...
You had the front bearings replaced? Or both front and back?
@@Codirectme just the right bearing.
Hi just seen your comment. I'm having the same problem, any chance you figured it out?
@@rachelmorrissey5141 me too
Did you figure it out yet?
I replaced the front calipers and bearings and still hear a humming noise. Any ideas?
thats your tires same thing happened to me there was water inside my tire
I have a 2018 Hyundai Kona. When I go over 45 miles per hour, I hear a rumbling noise which sounds like it is coming from the wheels. I had an alignment completed and the noise is still there. Driving at 45 mph, I don't hear the noise. What could be the problem?
I have that same problem how much they charge to fix that problem
It’s like $800 All in
My sound stops when I hit the breaks
Will it make the noise while sitting in park
My Chevy just does this loud humming noise coming from the front , even if I’m just parked , i don’t even have to go fast. What could it be ?
Same, my Chevy Cruz 2012 it’s so loud and when it’s parked too! Sounds like it might blow up
I don’t have those tools to fix my car wow . How much this cause at shop to get done . I usually go to Firestone
Yur doin great work out there in Ozzie land and shur there's not a boreen or a bog road to be seen for miles.
Thanks Tom 😄😅🙏🙏
I have a 2010 Honda Accord Crosstour. The humming noise is coming from the front end. As soon as I start driving u hear it. The faster I go the loud it gets. I told it to a professional and they said it was the wheel bearing, wheel hubs and need tires. I replaced the bearing, hubs and 4 new tires. Plus the front and back brakes. The humming noise is still there
Did you fixed it ? What was it? I am having the same issue
I have a Honda frv 2007 auto car drives fine but when on motorway at high speed steering shakes and there’s a constant dubbing sound from front wheel. Had wheels balanced but still the same.
Some saying it cold be transmission but I hope not 😅
Hello I have change my from shock absorbers and now have abs and traction and hearing strange noise humbling appear now any guest pls!
Thanks Gerard for the diagnosis and step by step process. 😊👍
Cheers mate 🙏🙏👌👌
Good day. I have a mitsubishi grandis 2004 manual 2wd benzine. Having a problem with the car.Whenever i went on a highway and as soon as it reaches 100km. I starts to hear a deep dull grrrr grrrrr grrrr kind of noice coming from the front of the car. Its kind of grinding. If i push throttle to go beyond 100km it disappears until i keep pushing it further but when ever i hold it steady at 100km or above it starts to do that.At speeds lower than 100km i do not here it.. grinding or that grrrrr grrrrr sound comes only when steady.. disengaging gear makes it disapear..Today i went to 120km and at once pushed the clutch padel and kept it pushed. Grinding dispeared. I ride mostly at 100km and its too much irritating having this grrrrrrrrrrrrgrrrrrr noice. Its loud but deep and dull.I can here it if i am at driving or passenger seat. The car do have 1 front brake rotter which is a bit crooked. Could it be that?Today was at a local workshop. The man said cv axles needs to replace but its a hit and trial..Can anyone advise what could it be.
??
Thanks
Did you ever fix it? I have the same problem in 2022
@@summersifysummers4702 I have a similar problem. My car starts to make a constant dubbing sound in high gear. Had a few hints it might be transmission but nobody’s actually tested it.
Nice and simple explanation video.
Cheers Fintan 🙏👌👍
Would you recommend doing this job without a bearing press?
I wouldn't recommend it. It depends how bad the bearing is stuck in the hub to if it is even possible without some sort of a press, I have done many in the past that without a press (and heat) you have zero chance of removal, but I have also done some that took very little pressure to get the bearing moving in the press.
Best case scenario is if you are doing it at home and you can't get it out, bring it to a workshop and have them press out the old and install the new one 👌👍
@@GerardBurkeBurkesGarage the sort of advice I was looking for.
Two months ago, I replaced the bearings in my LG Front loading washing machine and it was HELL getting the old bearings out. LOL! I wouldn't even try to do this job at home. Just my two cents. I tackle everything else EXCEPT this.
You can do it if you buy the entire knuckle assembly. Much easier and faster to install
I have a similar noise coming front of my car i believe, i replaced both front bearings but no luck, i honestly feel out of options
did you ever solve this?
Same here
Torque tube couplers(2 ) and bearings (3)
Torque tube couplers(2 ) and bearings (3)
Touque tube couplers and bearings
Put bearing in freezer overnight and torch the hub much easier
I changed my wheel bearing but it still made the same noise.. what could be the problem??
differential issue, im trying to figure out the same for my 03 suburban, makes a howling noise when i go over 20 mph but when i accelerate the noise goes away until i maintain the same speed (kinda like cruising) it starts to howl and vibrate
@@dakiddedwin4581 think I'm experiencing the same. Was it the diff?
@@20tea it was a differential issue pinion yolk messed up needed a whole new one
@DaKidd Edwin Wow, having a similar sound. Hopefully that's not the problem on mine.
Did you ever have it fixed?
Do we need to balance the cars wheels after changing the wheel hub assembly?
No because the tire’s balance is tested and performed when it is off your car, so the tire’s balance will still be the same. But you do need an alignment if you removed the entire knuckle. Otherwise, no alignment or balancing needed.
Hi Gerard, I appreciate for the video, HOWEVER, the $60,000 question is: “WHAT TYPE OF NOISE” associates with the repair (solution) shown in this video. My Nissan Sentra when starts moving it makes strong muffed and continuous noise. I wish your video started with sound of the noise that associates with the repair you presented.
I'm currently working on my 2018 sentra sv. It has the same noise. If you find out the answer let me know I'm pretty concerned it's my wife's car
My 2011 Elantra is doing this noise at hover speeds from 60 to 70 mph. On my right side . My struts n inner outer tyrods is replaced . This vlogs helps .
Does this sound appear in case of failed braking pads as well? Kindly add your suggestion.
It could,usually when it's the brake pads the sound gets much louder when you hit the brakes.
I am pretty sure now that this problem is due to bearing. Recently the sound has increased.
great vid, thanks.
Thank you 🙏
Got my wheel aligned with wheel bearing and still have the noise.
Mine only makes noise at 60-65mph 🤷🏻♂️
How much does this typically costs to get fixed
€450 Inc vat
Hub barren. I like never figured this out. Machanic working on it now.
Bearing
Mine sounds like a jet plane but everything else is fine tho the compressor is also making a little sound too i think the tires are the problem cause my tire rings are in bad shape ive seen 2 mechanics and one other guy and they all say diff. Stuff 😒😒😒 irs driving me nuts!!!
What was the answer?
record the sound pls...
I have a 2020 Subaru forester with a constant winding noise that gets louder the faster it goes..not a wheel bearing!
Did you ever find out what the issue was?
could be the tire
How much would a repair like this cost usually?
Wheel bearings on both front hubs are 4 hours labor.
@@UGHH_PPL price?
@@Midnight_online seriously how much is it cuz I have the same thing going on it's particular to Honda's
I'd like to know myself. I have a 2010 Q5. What's a ballpark figure to repair??
Both sides will be about $1,100 at the Honda dealership.
yeah 170k on the car, that’s a lot, time for a swap wheel bearing
My car makes a humming noise until I hit the brakes then it stops. Just had new wheel bearings and CV axles.
Still happening or did you get it fixed?
@@ShadowOfDeath33 got fixed
What was the issue?
@@ShadowOfDeath33 brake master cylinder
My romantic bounce with grinding at 40 mph..more prevalent on right side front
I have this
My car sounds like a jetson car when accelerating!! Any ideas
Do you drive a jetson’s car?
@@mr.topbottom1448 yes
My car sounds louder when I drive but when it’s idle it’s quiet
Sweet
👌
Shoe pads
yeah, can't hear the noise so this video is useless for most people who find it. how can we possibly be so dumb?
Mine noise is when i Accelerate after I stop.