Killing Welding Method! ! Sanitary piping (Senitari)
Вставка
- Опубліковано 1 лис 2019
- Good morning. welder jin.
The theme of this video is welding and welding of Sunnytari pipes.
Have fun and subscribe.
It is a motivation to make a new video.
First of all, the tungsten rod should be sharp.
The arc is concentrated in one place so that Tech welding works well.
Ceramic nozzle is not important for Tech welding.
The voltage is 80 amps, so the heat is not transmitted to the opposite side when Tech welding.
Set with one touch.
Place the center of the short pipe gap.
Tungsten rods should be pulled out short.
As the tungsten angle approaches 0 °, the arc concentrates in one place.
The alignment will fit well.
It's the fundamentals of every pipe piteop.
Not right.
Clean up the cross section with diamond Yasuri
This time, let's correctly.
After all, it's better to stand up. (Gravity)
Let's observe
Note that if you do Tech welding at 6 o'clock, the next Tech welding position will be at 12 o'clock on the other side.
Do tech welding with zigzag because the pipe gap should not open.
It's like this.
Ceramic No. 6 Diameter (15mm)
Tungsten rod (2.4 pie)
Tungsten Rod Extrusion Length (5mm)
4 "We start welding Sunnytari.
Welding voltage was set to 80-90.
You should arc start and watch the molten pool.
Do not start weaving right away, but wait for the melt to melt and the backside beads to form.
Why not start at the first start point?
Did you solve the question?
We make a cabinet with regular weaving.
It was edited at twice the speed to get rid of boredom.
Please understand and watch.
Sunnytari welding is characterized by welding without solvent
It is a killer welding.
Because we do not give a root gap but
The molten water that makes the molten pool may have convex beads or concave beads under the pressure of purging.
The purge pressure welding process is very important.
If the purging pressure is strong, push it out
If the purging pressure is weak, it will be affected by gravity and sink at 12 o'clock and convex at 6 o'clock.
The reason for narrowing the width of the widget is butt welding without improvement, and there is no reason to widen it.
This is to increase the thermal conductivity.
It is a method of welding while maintaining the liquefied water delivered to the backside beads.
Since writing a lot of wrist Welding
It is desirable to perform welding with the least amount of force.
Also, there is a pipe gap during welding
It is very difficult to find a weld seam.
You will have to move your head often so that you don't miss the weld line and concentrate.
It is recommended to start 20mm behind when welding the other side.
Because it's a preheating concept, to make a natural connection with the backside beads that we created.
Look at the paper tape side.
The red light seemed naneunge.
It feels like a backside bead is created.
Let's observe
Thank you for watching.
Challenge with new welding video.
Subscribe.Like.Share
subscribe!!!
"welder jin"
/ @welderjin
Beugeum sources .....................................
HYP - Catch Me If You Can
Music by (HYP MUSIC)
• [BGM] 저작권 없는 신나는 피아노 음...
HYP - Eyes (eye)
Music by (HYP MUSIC)
• 무료 BGM 감성적인노래 HYP - E...
HYP-Monologue
Music by (HYP MUSIC)
• [BGM] 감성 저작권 없는 음악 | 비...
#Welding #Tig Welding #Sunnytari - Навчання та стиль
통역!!! 번역의 문제가 심각해요. 6시 테크웰딩 후에 반대편 테크웰딩을 하라는 말인데 번역의 문제. 죄송해요.
써니타리 위생배관 1미리 해봤는데요 테크치기가 너무힘드네요. 너무얇아. 반전기에도녹는게 보이는데. 원터치 가능할까요.
1.65t일까예요. 나중에 테크치는 노하우 공개해볼게요.
ooo9oo9o
🤣🤣🤣🤣🤣
А толщина стенки трубы сколько мм?
다른 채널들보다 설명이나 비디오가 구체적이어서 너무 좋습니다^^ 많은 도움이 되네요~
눈부시지말라고 매너손 너무 감동👍👍👍👏👏👏👏
촬영 굳 용접기술 굳 화질 궅 촬영
다각도 굳 요즘 영상 올리는 분들
정성과 노력이 느껴 지네요 특수용덥 기능 자격증 받고 수년 동안 한번도
안해보니 뻥이지만 구경만 해도
재미 있네요 수고 많았습니다
워 너무 좋은 평을 주시네요. 더욱 분발할게요. 감사합니다😁
자세한 설명과 선명한 영상으로 이해가 쉬웠습니다. 감사합니다! '좋아요', '구독'
감사합니다 새로운영상으로 다가갈게요.😊
Dziękuję za napisy w języku polskim. Bardzo przyjemnie ogląda się twoje filmy.
Dziękuję za obejrzenie. Rzucę ci wyzwanie nowszym filmem.
대단하시네요... 시작위치가 자세가 엄청불편할텐대 이걸 논스톱으로 거의 끝부분까지 작업하시네요
제살용접은 말그대로 모제사이의 간격이 제로였을때 가능한거져 전압은 알맞게 알곤용접은 위빙과 전압을 잘맞춰야 용접이 잘됩니다 영상 잘봤습니다 저도 알곤용접사고 현재 알곤용접병행 일당직종사잡니다 늘 용접법 잘봅니다 경력이 있다하여 자만하지않고 배우고 또배우고 나보다 더나은 용접법이 있다면 이렇게도 저렇게도 열심히합니다 구독자분들도 영상만 보지마시고 실전에 하실때 유용하게 자기습성에 맞쳐 하시다보면 실력향상에 도움 많이됩니다 용접기술자들 화이팅~~~^^
i am just starting to learn! Now , this is what a professional welder welds like!
우와 이렇게도 되는군요 감사합니다 처음 알았네요
That is a work of art. Outstanding skill ... Well done!
기가 막힙니다.
신의 경지 입니다.
헐 그정도까지는 아니구요. 감사합니다.
자세한 설명 감사합니다^^
Gracias por el vídeo. Muy buena soldadura. Mañana intentaré hacer lo mismo a ver si me sale jejeje.. Todavía necesito experiencia. Me ha gustado mucho ver como hacía la soldadura esa persona.. A ver si en unos meses consigo hacerlo parecido :D ^^
선생님 좋은교육감사합니다
댓글 감사합니다😊
Saya dari indonesia saya sangat senang dengan trik welding yang di berikan, saya seorang welder yang masih butuh belajar, bravo master
I love watching precisious asian welders at work!
That's fucking racist.
Nicely done. I really liked the camera inside the pipe showing the welding from the inside!
멋집니다....좋은 정보 기술.감사 합니다.
Dẹp
상세한 노하우 영상으로 공급해 주셔서 감사니다...
Watched from Kansas USA. Great work. Great video. Thanks!
Kansas USA. Thank you
Sim mestre sou do Brasil aprendi que uma vez que surgiu uma possa de fusão devo prosseguir com essa gota de mel giratória visualizando assim a emenda do tubo caminhando em frente mantendo o grau dá tocha protegendo meu cordão de solda em todo meu percurso obrigado você é muito bom lindo trabalho bela apresentação e filmagem 🙏
Magnifque soudure, les gros plan intérieur sont formidable ! Félicitations
Sim uma bela apresentação e nesse processo trabalhar com o tungstênio mais curto é uma boa opção e dependendo da espessura do material a regulagem da amperagem é fundamental para não oxidar tanto o tubo e a penetração varea com a velocidade que você conduzir a tocha no grau certo e a concentração na possa giratória de fusão parabéns uma boa apresentação 🇧🇷🙏
Love the video you are very talented man keep more videos to come thanks
잘~찍었어요..구욷 영상 ~이네요
안녕하세요^^ 저ㄴ 용접학원만 다니면서 용접을 배웠던 사람이고 실제 필기시험(용접/특수용접기능사)는 합격했는데 실기에서 둘 다 떨어져서요 다시 도전해 보려고 합니다 잘 보고 갑니다 더 좋은 영상 기대할게요^^ 감사합니다^^
화이팅😊 자격증과 실전은 크게 많이 달라요. 용접직종을 택했다면 하루빨리 취업하시길 바랄게요.
좋은 영상 감사합니다 ㅎㅎ 😂 💕
You have a great skill, good work!
역시 최고네요
과찬이세요. 감사합니다. 소중한댓글😘
Great job thanks for sharing and teaching !
Olways the best my ticher. Good luck
Thank you. Good luck will come to you.
Great camera work. I'm just starting out with my everlast tig welder so everything is pretty new but I would like to start a career in welding.
What kind of Everlast do you have? I have the 210 EXT which I am very happy with. Everlast makes an affordable machine that is super reliable and easy to use. The only thing I would recommend doing is upgrading to a CK torch with a flexible head and maybe some larger cups from Furick or GLS Fab. They are not expensive and make a world of difference. Also If you are welding stainless, backpurging is a must. I have figured out how to make a really nice back purging setup for a very cheap price. Send me a private message if you want the details as I don't want everyone knowing my secret!
Ap ka continues bohat acha hota ha mujy bohat kuch sekhne ko mela ha
우와 대박 멋지십니다 .. 존경합니다 ㅎㅎㅎㅎ
Nice my friend. Good job!! Take care always!❤️
기술이 좋으십니다 ^^ 엄청난 내공이군요
훌륭하십니다~
과찬입니다.😁
용접하는게 아니라 예술가시네요
Very high attention to detail! Excellent job!
Have a nice day.
아름다운 용접ㅎ
Ficou Incrível muito bom 👍👍👍👏👏👏👏👏
잘보고 갑니다^^
Increíble eso sí es un soldadura muchas gracias por tu vídeo
A agulha Um pouco Mais recuada A solda Fica com Mais Brilho. . . Mas Parabéns ferramenta Afiada 👍
멋지다..ㅜ
저도 빨리 진님처럼 a급용접사되고싶습니다
이거 보니까 알겠네요. 한국사람들은 정말 용접을 잘합니다. 이론적인 매뉴얼이나 이런거 없어도 도제식으로 내려온 노하우의 레벨이 틀려요.. 진짜루..
The camera shot you took from the inside was awesome🤙🏽
Have a nice day.
@@welderjin olympiens knwes
실력이 대단하시네요!
좋은 영상 감사합니다! ^^
굿😊
이게 제살 용접이라니 ;;; 대단하십니다...
다 할수 있어요. 대단까지는.......댓글 감사해요😊
Nice Jin, Thank you for the video! Much welders cannot do that...
Thank you. Many welders can.
I can do that 👍!.
Nice welding job. Pipe welding with urgon purging.
Great job! Amazing skills there brother.
Спасибо, брат.
A joint that tight shouldn't need to weave it
Also weld not clean on outside so angle or gas flow is wrong there should be flush weld inside as penetrative causes turbulence
좋은 영상 잘보고 갑니다
감사합니다. 좋은하루 되세요😃
👍👍👍🖐️🖐️🖐️🖐️
최고다! 짤짤이 손이 안보이네ㅎㅎ
Amazing Jin!
Waw...cara pengelasan nya sangat bagus 👍👍👍🤝 indonesia 🇮🇩
Nice to hear from you thanks
''''Diviértete y suscríbete...'''' -- dice... welder jin. No tienes idea lo mucho que me he divertido... hasta tuve un ataque de carcajadas... Mi familia se vió forzada a darme un sedante...
Tanto poder me dices. Me siento muy bien Volveré con un nuevo video.
Very skilled welder, well done.
I just started professionnally learning welding (stick, mag/mig, tig) . This is impressive !
Parabéns ficou muito bom!!
배우고싶네요 깔끔하게 잘나오군요 최고입니다
chuẩn quá bạn ơi
Джин,ты молодец очень хорошо вариш есть чему поучится у тебя.Удачи в работе!!!
Спасибо за просмотр
Great job jin. . Thanks For tips. . . Saluttttttttttt from WELDER 🇮🇩🔥🇮🇩❤️
Muito bom seus vídeos parabéns deus abençoe
Japanese welder is known as among the best welders with the most professional welding technics in the world
ㅂㅅ 한국이겠지 어딜 듣보잡 일본을
Mantulll,sy dulu jg welder gtaw,klu liat org lg ngelas naluri sy lsg keluarrrr biasa..
Inert Atmosphere Purge Cam! I was going to suggest this, and it already happened. This is pretty advanced thinking for welding videos. There are tiny inspection cameras now, I wanted to see one stuck into the purge chamber.... and there it is! With no gap and no filler, this is very demanding. This used to be called "Autogenous" welding, where there is only the base material and no filler. If a machine does this people say "Orbital Welding", which sounds more exciting than it is. Clearly what we're seeing here is orbital welding, but done by a craftsman instead of by a special device.
Thank you for good advice. Auto welding also exists in Korea, and orbital welding is underway in the world's No. 1 offshore plant. This video is about sanitary pipe welding-senitari, and there is a mistake because it is manual welding. Thank you for the advice.
Didn't know that Leonard, thanks for the explanation
@@welderjin I can't really advise you! I'm just talking about the terminology. Just making conversation you know? I really enjoyed this video, and might be able to attempt something like this... next year? If I stop drinking so much coffee. I'm definitely not saying that you should go BUY an Orbital Welder or anything!
Trabalho lindo de se ver, nota 10 !!!
👍👍👍👍👍👍👍👍非常棒的视屏，谢谢😜
Good welder I try to study about it
マスター you know what you are doing... I am your new subscriber
Thank you for signing up. I'll reward you with a good video.
Super vidéo. Pour ma part la porcelaine glisse sans arrêt. Pas évident
👏👏👏👏👏👏gracias por compartir
Un maestro.👍💪💪
Gracias Que tengas un buen día.
Браво мастер!! спасибо поучительно очень и все подробно расписал молоде!!! за камеру внутри чтобы видеть шов отдельное спасибо !!!!!
Вам любопытно, швы? Я вернусь с другим видео в будущем.
@@welderjin yes. ok!!!!
Thanks for the video.🤑 ✌🇺🇸✌🤙
Your film is very helpful but i want you to show me everything in real practice 😎
Thank you. I'm in the process of showing you everything.
Good Instruction Thank you
Most beautiful weld.
Looks good mate!!👨🏭
Have a nice day.
Bravo, leçon de Maître
The best gan. 👍
새싹이 많이 배워갑니다
감사합니다. 좋은하루되세요.😊
so great i really like it brother
Best I've ever seen!
Mantap,,weldingnya halus& rapi
Petrus Channel ,ngomong sama siapa lay..
우와...진님 조회수 실화입니까? 대박^^
그러게요... 왜 조회수가 많을까요?
Thank you!
Gracias a ti estoy mejorando yo también gracias
謝謝分享，還加中文幕。謝謝非常感恩的教學。
我更感激 祝你有美好的一天
Root looks awesome.
Have a nice day.
好技術👏👏👏
好的技术。
¿Cuál es la manera para calcular la presión de purga? Saludos desde México
Are you doing this weld without adding filler metal?
Nice work Jin.
By the way, what make or brand name and model number of your tig welding machine.
Thank you very much, Barry
Good👍👍