Woodmate's Mr. Grip Screw Hole Repair Kit (Review) - Renee Romeo
Вставка
- Опубліковано 29 січ 2018
- My Review of Mr Grip Screw Hole Repair Kit
Watch my review of Mr Grip screw hole repair kit. Do you have a screw that just won't tighten anymore? I do. I have a hinge that's falling off one of my doors. The culprit is the screw hole underneath the hinge. All three screw holes are worn and stripped so none of the screws are tight anymore. I temporarily fixed it with longer screws but that hasn't permanently fixed the problem either. Most of the force of the heavy door is pressing on that hinge and causing it to become loose over time.
I'm trying to get an easy fix.
Traditionally, I use a toothpick (or five, in this case) and Elmer's Glue to fill the void in the screw hole. I pound the correct amount of toothpicks into the hole along with the Elmer's glue and wait for it to dry. At that point, I can insert the proper size screw and the whole toothpick concoction will compress into the sides of the screw hole and make a nice sturdy fix. In this case, I'm concerned about the force and motion on the hinge so I feel like the toothpick trick will only last a short period of time.
Metal seems better!
Instead of inserting wooden toothpicks into the holes, I am inserting Woodmate's Mr. Grip metal strips. The metal strips have steel teeth that "grip with amazing strength", according to the package. This product package is less than three dollars and has several metal strips included. Perfect to have on hand for a few household repairs - OR IS IT? Mr. Grip is supposed to work on wood, metal and plastic. "Including furniture, LOOSE HINGES, knobs, tools, pots and pans, HOLLOW doors, walls and ceilings, cement and aluminum."
Don't miss this demonstration of Mr. Grip...
The DIY site that teaches you how to create and succeed with all projects around the home.
2498 Woodmate, Woodmate's Mr. Grip Screw Hole Repair Kit (Review) - Renee Romeo, Mr. Grip srew hole repair kit, mr. grip screw hole repair kit instructions, mr grip screw hole repair kit, mr grip screw hole repair, screw hole repair kit, mr. grip screw hole repair, stripped screw hole repair kit, stripped screw hole repair metal, screw hole repair, stripped screw hole, how to fix stripped screw holes, how to fix stripped screw holes in wood, renee romeo, LRN2DIY, ron hazelton - Навчання та стиль
I just used Mr. Grip as directed on my door hinges and it worked perfectly. Watching your video I believed I identified why it did not work for you. Had you used Mr. Grip when your holes first stripped it would have worked perfectly.
The problem is you installed longer screws and used one inch Mr. Grip strips to fix a five inch hole. The threads were in too deep and the Mr Grip strips were too short to work. Had you installed strips the length of the hole (Step #2) the product would have worked. The strips need to be in the area the threads will stop at.
Regardless, thank you for taking your time to video and post. 👍
Frank M, Thank you for that! Short of tearing out all the trim and investigating the problem underneath, I had no idea why it didn't work. I really wanted to love that product. It's true - if the strips weren't long enough then it definitely wouldn't work. But... my toothpicks are still holding strong so I guess the old fashioned way is a little easier to make work the first time. Thanks for the feedback! If I'm ever in need of something like this again, I'll try it out again just to prove it to myself. All the best, Renee
Yes, the problem wasn't Mr. Grip, the LONG screws she first pulled out actually screwed UP the hole with the threads GOING PAST the short distance of the door frame had.
Mr. Grip has worked every time for me. You just have to follow the instructions--correctly.
S G, After all this, my toothpick trick worked just fine and I always have them on hand. No need for fancy substitutes. I'll keep doing this repair the way my Grandfather taught me. Thanks, Renee
I came across this video trying to figure out what I'm doing wrong, your is experience with this product is just like mine.
Sarah Terban, I just couldn't get it to work but I'm happy with the results from my toothpick trick. Thankfully, I always have toothpicks in the house so I never have to run to the hardware store when I experience this again. I hope your situation allows you to do the same! Thanks for letting me know. All the best, Renee
Thank you for this! I was almost about to make the plunge on this product. When I was at the store (I won't say which one but rhymes with "rome we-go") they agreed with you. They said they had several people with the same complaint. Also, and it worked for me, they told me to buy a higher quality tooth pick... I had no idea there was hierarchy for tooth picks! But she explained that some are made of better wood.
James, You are a treasure! I had no idea about the toothpicks but have also learned that glue is made in different qualities as well. Who knew? Although, so far, so good with the Elmers! Thank you so much for the great feedback, Renee
I cut off a plastic zip tie the depth of the hole, inserted the strip of zip tie in the hole along the side the screw. The teeth of the zip tie gripped into the teeth of the screw. It fit very securely.
Rudy Garcia, WOW! Excellent idea. I wish I thought of that because it would have been a great thing to show. I use zip ties for a lot of unusual uses so I can't believe this didn't occur to me! You're the best, Renee
GOOD Idea, never heard of such, and with buying the zip ties in bulk at Harbor Freight may be my BEST option when I get on my metal roof and check EACH screw BEFORE it ever starts to leak
I went the dowel approach to refill and then re-drill the holes, and that has worked really well so far. It does mean taking off the door, however.
Hi Sean, I'm so happy that I didn't have to go that route myself. This door is so heavy and I was afraid of what I might find beneath the trim. I have a feeling that it wasn't framed correctly and that's why the screw didn't have anything to grab on to (something slipped). I know your dowel won't move any time soon! You're a braver soul than me! All the best, Renee
@@ReneeRomeo We just bought a 2016 townhome, and it seems like whoever did some of the doors and cabinets wasn't very good at their job (not to mention towel fixtures without adequate drywall anchoring...). I still have more doors and cabinets to fix, but thankfully I bought a lot of dowels and I'm learning how to use a drill well enough. Overall I'm happy to be a homeowner, and these are just small things to fix on the weekend.
@@seanmcdirmid Congrats on the new purchase! You'll never be bored as homeowner. Fortunately, most fixes are doable DIY's. If you're looking for other helpful projects, please check out my website reneeromeo.com for over 170 DIY video tutorials. I can even help you iron a dress shirt properly (in case you'd like a new job too) LOL. Have a great weekend of repairs, Renee
I was just going to purchase. So glad I found your video first! Keep doing what you're doing!
Hi Melissa, Thank you for sending this nice note! I'm glad I saved you some pain. I just couldn't make it work. Old fashioned toothpicks did the trick and they're still holding strong. All the best with your repair, Renee
P.S. If you'd like to see more DIY solutions and projects, please visit my website www.reneeromeo.com where I have over 175 full length videos. TY
Well this vid just saved me some time. I was able use wood anchors on two of the screws holes but one is so far gone I’m gonna need the toothpicks. I’ll avoid Mr. grip all together
Hi CrazyTee33, I'm glad that I saved you some frustration. I REALLY wanted this to work but I still can't figure out how this could work well. The toothpicks are still holding up great though!! I think everyone has a toothpick or two lying around the house so there's no shopping to do either. Best wishes with your repair! It'll be nice and secure now. All the best, Renee
Another option is get some HARDWOOD dowels from big box store about the size of the screwed up hole, one that may just slide in or be tapped in with glue, let it set over night, then install the CORRECT screw in it.
The Mr. Grip must be placed into the hole and then the screw is screwed into the hole. The picture on the back of the package shows placing two pieces into the depth of the hole and then screwing in the screw. Depending on the size of the hole and how far it is stripped, you may have to use multiple pieces just like you did with the toothpicks.
Hi Dennis, Well - I didn't try multiple strips. I had my hands full with just the two. 😀 I think it's worth a try though because it makes sense. I think would have to use some masking tape to keep everything from moving around during the process too. Excellent idea! Thanks so much for the insight, Renee
Is a 3/4” screw long enough for a solid redwood door?
Michael, I would go longer. 1 1/4" is better. All the best, Renee
The classic “I used the product incorrectly so I want a refund now.” Trope. Brilliant
The best solution - and it’s really easy - get a wooden dowel or a piece of round wood and cut it to an inch or two. Use a drill bit that same size and drill out the holes. Put glue in the holes and a little on the dowel and then use a hammer to tap them into the holes. Use a very small drill bit to drill pilot holes and then put your screws in. This is the absolute best method
Love this idea! I had no clue what was behind the wood. Thank you for your insight! So far, so good but I will do this if it fails. All the best, Renee
Just saved me time and money
Hi Michael, I'm so happy to help! I always have toothpicks on hand in the kitchen so I'll always be prepared too! Thanks for the nice note, Renee
Are you trying to use an inch long screw in a 3-in long hole?
Daniel, I thought the whole premise was to fill in the width? At first, I didn't know there was a 3 inch space behind it. Very bizarre construction practice in my home.
@@ReneeRomeo In hind sight I could be wrong
@@MrManDiller 🤗
I've used this product for over 10 years and have not had that difficuty in using it.
Rebecca Vanover, A few others replied the same way. I'm guessing that it works in some instances and in others, it doesn't. My situation fell into the "doesn't work" category. I'm still more a fan of the old toothpick trick anyway - they're always available and even cheaper than Mr. Grip! Thanks for the feedback, Renee
Beautiful woman in the clip has NO idea WHY it isn't working, I posted WHY above !
@@REVNUMANEWBERN 3:23
@@REVNUMANEWBERN. Why
thanks for the vid, I was thinking of getting this but not now.
Renob, Glad to help! I wish it had worked but toothpicks are cheaper and hold up just fine. All the best with your repair, Renee
nThe directions on the back of Mr. Grip Package says for Hollow Core Doors....! You stated in your video the Door is a Solid core door. Using a Powered Driver will only strip it out again, that's probably why it stripped out in the first place. Power driver's have a Clutch for the amount of torque to use when driving screws, if it too high it'll strip the threads out every time. Using your hand held screw driver, you put your full upper body weight to the screw driver forcing the screw into the repaired thread hole which actually pushed the repair into the hole and not allowing the screw to be re-threaded in to the repair..... Never mind the tooth picks & glue...! Take a wooden Match, break off the firey end, insert wooden match stick into open hole, then hammer the whole match stick in until it's Flush w/the door jamb....Start threading screw in center of hole, let the screw do the work and don't exceed too much pressure......
Ja L Pa, My issue was actually with the door jamb because the door wasn't installed correctly in the first place (there wasn't solid wood behind the hinges, like there should be). I was hoping to treat that area like a hollow core door (ie: Mr. Grip) because the screws were over tightened - like you said. It was very frustrating to try and get the metal strips aligned, hold screwdriver, etc.. I really prefer the old fashioned fix myself - it's so much easier. The hinge is holding up perfectly to the toothpick repair too. Thanks for the matchstick tip. I'll use that next time I need to do a repair like this. Thank you for your insight - much appreciated, Renee
@@ReneeRomeo You're very welcome I thought you'd jump all over me like flies on ......but you didn't, I am totally surprised glad I could help you out..! =)
@@jalpa9642 Oh, thank YOU! I'm always looking to 'perfect' the process - no matter what I'm doing. I rarely criticize because I certainly don't know everything. DIY is all about the destination - I'm just helping people get there a little easier (maybe). Please check out my website if you'd like to see more DIY projects: www.reneeromeo.com. Renee
I think you need to rethink the repair when the toothpick and glue fail. I agree that you did not follow directions and that the original hole in the jamb is too big to make a long lasting repair without fixing the hole. I would support the door, take out the three screws, and fold the hinge leaf to the door. I would use wood glue and a dowel to fill the hole (redrill to fit the dowel) or use a threaded insert and flathead machine screw. I am not a carpenter, so my advice might be worthless. BTW, the long screw you tried was a good thought, but at that location on the jamb there is only drywall behind it as evidenced by the white material on the threads.
Mike, I agree with all of your assessments. Fortunately, the door is still in place and hasn't required a re-set. It still seems like bad construction to me - no wood where there should be some. I think the door frame was heavily shimmed there and I just happen to have a void behind the hinge. I'll definitely do it your way when my repair fails. So far, so good 👍 Thanks for the great feedback, Renee
Thank you for this review... I bought Mr. Grip and watched this video to learn how to use it, but now I'm taking it back!
The long screw has a shoulder, so it will not grab anything in that location. Also, if the gap between the hole and the screw is wider than the Mr. Grip, there is nothing to grip but air.
Mr grip works fine if used properly. Remember, a shoulder may be fine for leaning on, but not to grip ... and air is for breathing, but for gripping.
Gotta Dance, I agree with you but Mr. Grip advertised on the package that it was made for hollow core doors. That means a whole LOT of air. It didn't work with the smaller screws either (no shoulders). The hole that I was going into wasn't damaged and much wider than the screw itself (maybe 1/32 to 1/16"). Even with several strips of Mr. Grip, it was a fail. I stand by review. Renee
Hollow core doesn't mean hollow frame. The frames can be as thick as 1.5". The door frame itself may be 3.5" solid wood or non-existent depending on who built it. I have encountered both and in-between. Low quality wood may have knot holes or even rot. Neither will hold a screw. I've even encountered layers of drywall filling a gap (crazy).
Get on a construction site when the interior work is being done. Ask to be shown how a door frame is built (properly). This how I learned before becoming a carpenter.
Gotta Dance, You are absolutely right. If the toothpick didn't work, I would have been forced to take the casing off and inspect the area behind the door frame. I expected Mr. Grip to work like my toothpick fix - only without the glue mess. Even with four metal strips inserted into the hole, it didn't grip into the wood at the door frame surface. It's too bad because it's an inexpensive product that I would prefer to use instead of toothpicks. In 6 months when the toothpicks inevitably fail, I'll film another video and really see what's going on behind the frame. Thanks for the feedback! Renee
Renee Romeo , also, chopstix or dowel rods work well glued into the damaged hole, drilling to screw size when dried.
I'm working on hinges and door nobs and dead bolts right now in a neglected house. While surfing for any new development in this area I ran across your video. Keep it up!
Gotta Dance, I'm glad you found me! Darn it, I have a drawer full of chopsticks (for some odd reason) and I could have used one of those. Ah well, next time... Thanks for watching! I love learning new things too, Renee
Gonna be serious here. I just got back after buying these to fix the door side of a hinge. Went on to youtube to see how they are used, and found this video. Think one problem is your pushing while putting the screw in. Since you used longer screws already, your holes are deeper. Pushing means the product is being pushed into the hole before it can engage. For me, two short strips did the trick. Started hearing the cracking of wood under compression. Still, I pulled a couple screws out, and put another couple strips in. For a total of four strips for two of the three holes. There not going anywhere now. Let the screw do the work, not you. If you don't let the product grip and engage, of course it won't work.
jbarthol, I completely get what you're saying but I tried several techniques with this product and nothing grabbed. Pushing or not pushing. I would agree with you (my fault) if they didn't advertise that the strips work on hollow core doors. Since I don't know what's going on behind the hinge side (without tearing off the casing for a peek), even if it's it hollowed out, it should have worked (according to their advertisement). Anyway, I'd have a lifetime of toothpicks and Elmer's glue for the $3.00 I spent on Mr. Grip. I stand by my review. Thanks for the critique, Renee
Would have been great if camera was zoomed in
Here's a shorter video that was more illustrative of how to use Mr. Grip. ua-cam.com/video/DmVEfNhRjY4/v-deo.html
Mmmyess Thank you for sharing this. I think it’s incredibly unfair to the manufacturer, and misleading, to use the product incorrectly, then say it doesn’t work. This video is quite long for such misinformation.
You didn't follow the directions. When you put the repair shim in at the same time as the screw, it gives no chance for the screw's threads to bite into the repair shim. When you did that, then turned the screw again, against the shim, you simply stripped out the shim in the hole that was already stripped out. You have to allow the shim to create new threads to receive the screw. Here's a link to how to properly use the Mr. Grip shim kit:
ua-cam.com/video/DmVEfNhRjY4/v-deo.html
Thanks for the great content.
Keep up the good work.
בס״ד
Kelikaku, Thank you for the explanation. I'm pretty good at understanding directions and just couldn't manipulate everything I needed to get this to work. The only thing I can think to use this for in the future would be a situation where I couldn't use wooden toothpicks. I'll try my best with your description. Thanks again, Renee
@@ReneeRomeo True. You're quite welcome. Toothpicks do the same thing anyway. Or matchsticks, or even a whittled wood shaving.
Renee Romeo, you should have placed multiple strips in hole.
Hi Paris, I couldn't fit any more strips in the hole. It just didn't grip. The toothpicks did though. Thanks for the assist! Much appreciated, Renee
If the hole is big try inserting a wooden golf tee with glue. Let it dry. Trim tee flush then redrill the hole and insert the 3/4 inch screw mounting the hinge. Method 2 is to split the golf tee into smaller pieces long ways and insert with glue and screw. Trim the tee pieces as necessary.
What you said. Golf tees work miracles. I also make sure I use a good quality of glue, and I make sure I let that glue set up at least 24 hours before I try to screw or drill into it. ZZem screws are the bomb, and a GREAT fix, but a wee bit expensive. Tooth picks are alright, but I prefer one solid golf tee v. 3-4 tooth picks.
Hi Jim B, Thank you for that great pearl of wisdom! I wish I had a golfer in the family because I didn't even think to use a tee. I'll go to my local sporting goods store so that I'll have one on hand just in case. I like the idea of just one filler piece. Thanks so much for the tip! I love it. All the best, Renee
@@im2yys4u81 Yes - I've discovered great quality glue too. Although I haven't had problems with my fix, I wish I had done it with your and Jim's combo. Thanks for chiming in! Renee
@@ReneeRomeo I'm thinking that if you don't have access to golf tees you could always buy a short stick of dowel rod. Pretty near all hardware stores carry it. Glue wise I'm having good luck with Titebond II.
@@im2yys4u81 I'm heading to the hardware store today to buy a variety of dowel sizes for the next repair. Great idea! Renee
Stripped door hinge hole? Time from a new house!
Moo Moo Puppy, LOL - That actually happened! We've moved on. I like how you think. Renee
LOLOLOLOLOL
re-hang the door; move the hinges 4/5mm into new/fresh timber
Hi deadpeople stuff, Excellent idea! I wish I had that kind of muscle - lol!! The toothpicks haven't failed yet but when they do - that's my next move. Thanks so much for the great thought, Renee
The screws I have, (no other will work), have flat tips and the tooth picks won’t work. Definitely won’t waste time with that 😩
Banks R, Sorry that I don't have a good solution for you. Best wishes, Renee
What this poor BEAUTIFUL lady doesn't realize is the bolts she FIRST pulled out had a LONG NON threaded part so that the actual threads went THROUGH the wood in frame and then was touching NOTHING, based on all the modern door frame instalations I have seen, also in HER situation the NON threaded part of the FIRST she pulled out was the actual part that supposedly was supposed to hold, it also looks like the SECOND screw was smaller in diameter than the FIRST she pulled out which makes it IMPOSSIBLE for the fix to work. ANOTHER issue I saw is the FIRST screw had a thick head that PROTRUDED ABOVE the hinge instead of flush with hinge surface, the PROTRUDING head actually keeps the hinge from working properly when the door is shut, actually as the door is shut the force of inside the hinge is actually helping to loosen the screws. Honey means well just doesn't have a clue, too bad I wan't around I would of been GLAD to fix it for her and teach her a few things
I’m glad you figured it didn’t work properly for your viewers. That way we didn’t waste our times
Mike Mike, I'll share all the bad with you too! Good, old-fashioned toothpicks are where it's at for this DIY fix. Thanks for the nice feedback! All the best, Renee
Here's a video with a different result. ua-cam.com/video/DmVEfNhRjY4/v-deo.html
This was actually so painful to watch! Y didn't u just follow the directions? Take the strip, bend it like a U, insert into hole! So easy and works great 😂
Lisa, That's not what the directions on the box said. 😳 I got it done the old fashioned way anyway... Bestcwishes, Renee
Learn how to use a better microphone for audio recording.
Hi AVOLITE, I do have a lavalier now. It makes things much clearer. Renee
DIY like a PRO?
When a screw strips the wood, you want to repair it not make it worse.
You fixed it partway with the wrong size screws before. During this demo you continue making the hole larger and larger. I'll bet that you practiced a few times, too. Then you purt in the piece without following the directions and THEN followed the directions. Then you used the toothpick and said you'd need to fix it again in six months.
The product is designed to handle normal strips...not after six bungled attempts that have made the hole so large it would not work. This is not a fair test of the product. It reminds me of recipes where someone says, "I replaced x with y. I replaced a with b. I cooked it longer. It didn't work. Bad recipe."
I've used both. Mr. Grip works and there's no dry time or cleanup. It is not designed for a hole that's the result of so many mistakes.
Would you follow the advice of someone who fixed something six months ago with the wrong size screws, made multiple attempts today, and then fixed it saying it won't hold for another six months.
I am certain there are many things you do well, and even excellently. If you are here to demo how many mistakes can be made, say so. We learn from your and our own mistakes. But don't say we should take your advice and that you're doing it like a pro.
I am not saying I'm any better. But when I make mistakes, I don't post them on UA-cam as a demonstration of my skill. I hide them. Promoting your (multiple) failures is NOT good marketng. Get a grip!
Your advice is to fix it wrong, make multiple attempts at fixing it wrong, then be satisfied that you haven't done it right.
I think this is a great diy video to post bc it shows you what not to do and the comments are explain what she did wrong and how to do it correctly.
Gotta give her props for keeping it up with all of the criticism