Devin i rally love your content im a subaru owner myself own 5 wrxs so im a bit biased lol but ever since i watched your content im starting to really appreciate evos and i learnt soooo much now my next car has to be an evo 7
I'm very happy for you Devin! It's crazy that the recirculation tube rubbing against the radiator was making all that noise. The look of utter happiness was awesome!. It has to be a euphoric feeling! I can't wait until tomorrow to see the first hard pull.
I wish I had a friend like you Devin, you’re such a G with evos. Love your content man keep up the great work and I’m genuinely happy to see you excited for the 8
Man I was thinking the same thing.. let alone he's on them home depot stud ass spacers.. I still say all this should have been done to the old black 8.
Gonna have to start calling you Devin “Sus” Niemela after the last few videos. Also if you measure the center cap hole diameter in mm’s for the grey evo’s wheels I’d like to try and 3D print you some center caps!
Funny enough I made custom radiator brackets for my 4G69t today, had the same issue. Without the rubber bushings the radiator will rattle about while driving, zip ties wont work well. I made custom brackets out of aluminum sheets.
Yooo so hear me out. I’ve been watching u for years.. I’m a die hard mustang guy. I have a 2020 mustang gt bagged. But..... I bought my first evo 8 last Saturday bc watching this build is freaking sickkkkkk
upgrade that wastegate to a vband tial and then you'd have all the options for pipe routing! So freaking pumped to see this up and running finally! The way I fill my DSM's transfer case is just use that same exact fluid pump, and pump it into the fill plug until it starts to run out. Using that pump make it fairly easy. Filling through the drain seems like a lot more work to me. or pick up one of these and use it on the fill plug: Amazon.com: Slippery Pete Fluid Pump for Gallon Bottles and Wide Mouth Quart Bottles - Transfer Gear Oil, Transmission and Differential Fluid, Antifreeze with This 30cc Hand Pump: Automotive
You should really run some solid or poly motor mounts to help from the motor moving so much. Sure you'll get some vibrations but worth it. The very least get a solid front motor mount.
It's always a good feeling when things just work after you've put in so much effort. Sure there may be little hiccups here and there, but having it m0ve under its own power is a huge achievement! 💯💪🏼
Is there any way to get a smaller radiator under the front cross beam. Having not seen this closeup in person, as a novice , it is very difficult to tell.
I love the yellow in the engine bay a lot. The blue titanium bolts with the black background goes really good together
Devin i rally love your content im a subaru owner myself own 5 wrxs so im a bit biased lol but ever since i watched your content im starting to really appreciate evos and i learnt soooo much now my next car has to be an evo 7
yeahh man keep another evo back to life cant wait to see
@@hanfederal3268 my Instagram is ReclaimerNZ
Congrats Devin! Car looks crazy!
This is the best build series on UA-cam. Until your next one... congrats so pumped for you
I'm very happy for you Devin! It's crazy that the recirculation tube rubbing against the radiator was making all that noise. The look of utter happiness was awesome!. It has to be a euphoric feeling! I can't wait until tomorrow to see the first hard pull.
I've always loved Evos. Devin Niemela has done nothing but made me love them more and gave me confidence in owning an Evo 8-10 someday.
Ride safe broski!
Its EASY to fill the front diff.
Use a short bit of hose gaffer taped to a funnel and feed the hose down from above into the fill hole :)
I wish I had a friend like you Devin, you’re such a G with evos. Love your content man keep up the great work and I’m genuinely happy to see you excited for the 8
I can tell you're excited when you talk about driving it a few miles and get a big grin :)
You have more trust in those two lug nuts then I have in myself 😂
Man I was thinking the same thing.. let alone he's on them home depot stud ass spacers.. I still say all this should have been done to the old black 8.
Can't wait to see the car on the road pulling big power. Nice job on the build
By far my favorite build, please keep this one for awhile
Dang devin congratulations again...this is coming so good just how speechless.
Congrats.
Good job hard work feels great when you stand back and look at what you did ,every bolt every screw , every part looks great
Out of all your evo builds this is my favorite one 🔥💯
Gonna have to start calling you Devin “Sus” Niemela after the last few videos. Also if you measure the center cap hole diameter in mm’s for the grey evo’s wheels I’d like to try and 3D print you some center caps!
I sus agree...
Ngl is kinda sad about this build being almost done was really enjoying taking everything apart and making it clean asf
Cant stop smiling watching how happy you are 💪 Super stoked for this boys 🙏🔥
Love the look of this thing look Incredible the colours just look insane has to be one of your best builds yet
Funny enough I made custom radiator brackets for my 4G69t today, had the same issue. Without the rubber bushings the radiator will rattle about while driving, zip ties wont work well.
I made custom brackets out of aluminum sheets.
Catching up on videos. But congratulations on having the evo start up abs seeing and feeling all the hard work come together. 🔥
Yooo so hear me out. I’ve been watching u for years.. I’m a die hard mustang guy. I have a 2020 mustang gt bagged. But..... I bought my first evo 8 last Saturday bc watching this build is freaking sickkkkkk
This is by far the BEST BUILD EVER!! Keep up the great work Devin!! 😎🏎💨💨💨
upgrade that wastegate to a vband tial and then you'd have all the options for pipe routing!
So freaking pumped to see this up and running finally!
The way I fill my DSM's transfer case is just use that same exact fluid pump, and pump it into the fill plug until it starts to run out. Using that pump make it fairly easy. Filling through the drain seems like a lot more work to me.
or pick up one of these and use it on the fill plug: Amazon.com: Slippery Pete Fluid Pump for Gallon Bottles and Wide Mouth Quart Bottles - Transfer Gear Oil, Transmission and Differential Fluid, Antifreeze with This 30cc Hand Pump: Automotive
Super sick build man, congratulations
So excited for you bro! This build is so crazy!
You should really run some solid or poly motor mounts to help from the motor moving so much. Sure you'll get some vibrations but worth it. The very least get a solid front motor mount.
Congratulations on the build she looks sick
Stoked to see this running again.
amazing work Devin, you are an artist.
Very cool seeing it out of the shop and moving under it's own power
Must be so hard to resist doing some pulls.. Super stoked for you brother! 🤘
Can't wait to see the whole front end mounted again, what a build my friend 👍
Just watched a vid on a 600whp BRZ, this should be your next project, Boost the BRZ/FRS/86..
The EVO (Hyperblue) does look amazing 🤘
congrats man🙌 such a big project thats finally about to be completed!
So stoked for it to be driving again
I made a fitting with a check valve to screw into the fill port to completely fill the tcase
The best car in you garage!!! I’m in love!
I'm proud of you bro Hard Work And Dedication !! For the Bois
Links everything but that sick little Tcase filling tool/fitting lol where do I get one!!!!
Word up.
Dude this is absolutely insane, ya nailed it 🤘
Hell of a job man! Car looks awesome!
That’s so stunning! Not a fan of the blue too much but I’m sure you’ll make that black one banging ⚠️‼️‼️
It looks and sounds great man. Hope you keep that car.. that's your baby 👶..
Man that noise you heard before you took the turbo off was one of those pulleys.
Glad the hyper blue is back up and running. I’m selling my hyper blue STI tomorrow 😭😝
On to the next project.
Lessss gooo! Very proud for your build dude🖤
Congratulations bro
You have alot to be proud of my man
Looks awesome man so hyped for this to be finished 🔥
I think there’s enough space to re-fab the dumb tube towards the engine side to have more clearance with the radiator
I’m happy for you bro!!
It sounds much better now than before turbo spools sounds really great
That’s looking really awesome now I bet you it the power steering pump wining
Watched start to finish on this build, looks so awesome 😎
We all got that one friend that’s alway breaking their car 😭😂”what did you break now”?
You did a great job man 💯 Such a clean build
Alignment then dyno tune! 730 horsepower 👍🔥
It's always a good feeling when things just work after you've put in so much effort. Sure there may be little hiccups here and there, but having it m0ve under its own power is a huge achievement! 💯💪🏼
Amazing work devin love it
So fuckin happy for you dude. Your talent is unreal. Feel like a proud papa haha. She Built.
Amazing job!well done devin!
That black and yellow bay looks so good
Super clean, congrats.
Wouldn't the half Rad get you more room for your turbo piping as well? If it gives you more space for the turbo I would say go for it.
😎😎😎😎😎😎 She looks and sounds amazing bro. I’m so happy to see her running finally! Good work bro!
Yellow looks great on it😍 Nice work 👍
No check engine light nice the noise could be the tensioner pulley
Is there any way to get a smaller radiator under the front cross beam.
Having not seen this closeup in person, as a novice , it is very difficult to tell.
Day 3 of sneaking out of work to watch his 🔥 videos fina be here in the restroom for a while 😬
🧢
Welp sounds like it’s too late but you need a csf slim rad I have one on my ix and it clears a sheepey mani with room to spare
Looks like there may have been a taillight out on the VIII.
Gently "clearance" the bypass/recirc tube. A light or small depression would fix that for much cheaper.
Bellissima, lavoro super professionale 👍
I was wondering if they make the same full rad but 1 bar less thickness?
At 16.13, i don't understand what exactly you do? Why the sound change?
Do a forward facing turbo kit with the have radiator
Love the videos! keep up the grind
If your doing half rad now you gotta do forward facing set up
I’m glad to see you check over all your options instead of going Willy nilly and spend money you don’t need to do.good job good video 😎😎😎😎👍👍👍👍
I’ve waited for this day way to long ❤️
Whats the fitting part number ? The one used to fill the Tcase?
I use to have a Evo 9 but got rid of it back in 07.... miss that car soo much. Worse car decision ever made was to get rid of that car.
Yes shes back baby.❤❤💯
What type of camera do you use for your channel?
Congrats Devin.
I'm happy for you bro
Good work bro!
How do you pronounced vasyn?
Man get gate pipe moded and keep full size rad. A street car with half rad never the best thing losing surface area. Drops cooling efficiency.
Dope bro! Congratz! 👏😁
Some get me a “sus” count? Sounds like devins new word lately. I havnt heard it this much in one video😂
Definitely 💯💯💯 top.. Amazing build as always, keep it up, watching your builds all the way from Kenya 🇰🇪 Africa.
Well done 💯🔰🔰🔰
Where did you get that plug that threads in the t case ?? I need one !
Power streing pump bad or bleed it
Congrats great great job you can be "devin"tly proud of your work and all by yourself🔥🔥🔥👌
Congratulations 👏
Car is looking clean 🔥
I hope that sound is from the alternator i had the same noise from my car olso