Tubular Truss - Clerestory Roof
Вставка
- Опубліковано 29 сер 2024
- #tubulartrusses #estimate #drawuppro
Tubular Truss - Clerestory Roof
• Tubular Truss - Cleres...
#clerestory #detalles #roofmaterials
#keepitsimple #TinyHouse3d #3dHousePlans
5mx7m Modern House Design - 3 Bedrooms
• 5mx7m Modern House Des...
5mx7m (35sqm) - 3 Bedrooms | Clerestory Roof House Design
• 5mx7m (35sqm) - 3 Bedr...
#detalles #keepitsimple #drawuppro #clerestoryhouse
Clerestory House Design with 3 Bedrooms - 5 x 7 Meters
• Video
#tinyhouse #simplehousedesign #smallhousedesign
#interiordesign #modernhome #3bedroomhouseplan
Trusses or rafters are the most key to roof construction.
In its design you can see how much material will be used.
Single Roof is defined as a roof having only a single slope on each side of a central ridge, whereas, in shed roof, it has a single slope, but without a central ridge.
The single roof is a type of sloping roof. In this type of roofs, common rafters are provided on each slope without any intermediate support. Single roof construction is simple than other roofs.
Single roof has some limitations. Single roof is used for small spans. If greater spans are used, then larger roof sections are needed. In single roof, if rafter feet are not tied together by means of a roof joist or binder, then this roof will have a tendency ,under weight ,to push the supporting walls outwards at top causing structural failure of the wall. Hence in larger span of roof, single roof is not recommended.
The various forms of single roof are as follows:
Lean-to-Roof:
The lean to roof is defined as single slope roof with its upper edge adjoining a wall or building.
Couple Roof:
The couple roof include two lengths of timber (rafters) leaning against each other, tied where they meet at the top.
I have the following comments on the video are as under for health& safety of the people and the structure:
1.Thickness of material used shall be minimum 3.2 mm so that welding can be done. Less Than 3.2 mm thick will make holes in the tubular and 2.5 mm diameter welding rod shall be be used.
2.Thickness of metal sheet for roofing shall be minimum 0.5thick.
3. Cross bracing shall be provided to take care of uplift due to wind.
4.Spacing of purlins shall be maximum 1.2 metre centre to centre.
Design of roof shall be done by a structural engineer who has knowledge of steel structure and local condition.
Thank You
Thanks a lot !
This kind of house i want built in Bangladesh with similar roofing, but I didn’t understand how did you secure the fascial board or longspan roof? Please show more real life fittings video
Beautiful house Draw-up PRO the is Perfect Designs who is archietec design this home 🏠 i like this kind video. Thanks your sharing tips..
Thank you too
Thank you for this content na dagdagan Naman Yung kaalaman ko 😊
Salamat
May idea na ako sa bahay ko salamat sa pagbigay kaalaman.
Salamat..
Napakaganda ng design yan ang gusto kong design sa aking bahay balang araw mabuhay po kayo sir
Salamat
What is the stmated cost po
ang ganda ng design idol...👍👍👍
Salamat...
Thanks for sharing, sir! Keep safe and god bless.
Thanks, you too!
Would it be possible to put the smaller roof up top, extend the height of the walls and have a loft for that part of the house?
isang ihip Lang NG bagyo Yan..lipad agad atip nyan
Nice vedio sakto sa hinahanap ku na cost para sa trusses at roffing
Salamat
👍👍👍 Great good videos like this, must be known, detailed and clear to understand processings, thanks
Glad it was helpful!
@@DrawUpPRO ❤👍
USE HRS STEEL FOR TRUSSES, BOLT IT OR WELD IT. DYNA BOLT CAN BE USED TOO PO . SALAMAT
Watching lods, tnx sa pag share, bgo nyo po tropa sa YT, suportahan nyo po ako
ty
. . . it's much better if you could hilite sag rods and cleats with a different color so viewers can see & distinguish which ones you're talkin' about . . .
Thank You
Very informative. Thanks for sharing
Glad it was helpful!
An example of very informative video. Nice design thank you.
Glad you liked it!
Delikado yan sa super typhoon, lipad yan.
Ganda nga pero pagdating na typon Walang matira khit isang bubong
Thank you very much for the tutorial video.Amazing..
You are welcome 😊
mas maganda po sana kung included din sa vid yong mga computations nyo po for complete guide na din sana. Pero very helpful po tysm.
Salamat
Thanks for your tutorial video very informative.
Glad it was helpful!
Thank you very much po! very informative video..
Glad it was helpful!
VERY INSPIRING HOPE I CAN MAKE IT
It is cost efficient and good design but can withstand against strong typhoon like hainan ( yolanda) and rye(odette)? Just asking.
Thanks for the ideas
Most welcome 😊
Maganda pagkayari
ty
Great Video,I just want to know the thickness of the C sections you use?
1.5mm
Napaka ganda idol
Salamat
Thank you.
You're welcome!
nice design..
Thank You.
I wish content providers include their target audience, origin, costs to build. Not all designs fit every region. I guest the cartoon imagines, it's never been built.
Nice 👍
Bgus buat rumah desa
Terima kasih banyak-banyak
Can you give mi the floorplan..thanks
Small Modern House
ua-cam.com/video/OlB_u8OtaZo/v-deo.html
#detalles #drawuppro #keepitsimple
EXCELLENT JOB
Thank you
Ang galing ⁿ
Salamat
nice and very interesting i like it boss😊
Thank you so much 😀
Wow very impormative.
How much costs??
Thanks
❤❤❤
THANKS
May I ask if it is matter how to put the C purlins does putting this way "[" or this "]" matter when putting in this angle /?
Great!
Thanks
gracias por compartir
Gracias también
your the best
ty
3 bedroom haus with tubular (5x7= 35sqm ). Magkano po estimsted cost of construction..,?
It seems like water can be blown into the house under the overhang?
Mantap boss
I like it very much thank you..
You are most welcome
Nice video inspiring 👍
Thank you 🙌
nice video
Thanks for the visit
Nice design 👍
Thank you so much
Wow
thanks
nice videos, helpful
Thanks
How about down spouts? Are you going to expose them with that kind of roof?
❤❤❤❤❤
TY
In Thailand, many houses are built this way. Ours is built that way too
Good
Thanks
Ty
Sir how many degrees the upper and lower design...?
Good job
Thanks
whats the thickness of your tubular and purlins?
Salamat sa vedio ninyo.
your welcome
total cost of tubular truss...
nasa video po lahat ng materials. depende po sa location po yung cost.
good video, very informative, love it
Glad it helped
youtube.com/@sadiq221 plz
great
...
a good idea
Thank you
Ilike to follow roofing for my garage ext.
ty
Magkano lahat gastos practical at affordable sa budget
Thank you... Very nice
Thank You
estimated cost for the whole house?
Thank you big help😍
Glad it helped
Ganito style Ng bahay ko and I using tubular🙏
magkano po ba ang cost kung ggwa k ng ganitong bhay po ngayun dyan from scratch. salamat.
👍 5 Star..
Thank You
Sana kasama ang sukat
Nice
Thanks
Lose the music please..!
This makes me want to look for my long lost box of Cracker Jacks and play with the toy
Ask ko lng po ganito style din ng roof sa pinapagawa ko ng bahay,, pero ang magkaiba nga lng yung sa akin sa front yung open roof niya,,hnd po ba delikado sa ganitong style sa mga bagyo? Or hangin? Matibay po ba yan,,salamat sa sagot godbless
Good day!
I have a question...
Uh hmmm. If I try to look back and base my observation on my theory of structure subject, the structure of these trusses looks unstable, right? Or I just overlooked something? If someone could answer, please, enlighten us. It will be a great help for me and for others that could read this thread...
thank you!
#detalles #keepitsimple #drawuppro
Interior Design Ideas / Small House 5 x 7 Meters - 3 Bedrooms
ua-cam.com/video/MlWO3mIC1VA/v-deo.html
#smallhousedesign #tinyhouse #simplehousedesign
#interiordesign #modernhome #3bedroomhouseplan
walang insulation.
lovely
thank you
can you still put insulation on the roof???
👌
Estimated cost for that kind of roofing?? Thanks
I want to fix in my home.. how can I contact you..?
facebook.com/Tektontact.Briareus
Puwede po bang magtanung. Anu po bang mas matibay na gagamitin, tubular po ba o kahoy? Sana po mapansin po ninyo ang aking tanung. Marami pong salamat sa sasagot po.
Tubular mas matibay iwas anay. Pero pag NASA malapit k sa dagat. Kakalawangin saw Sabi nila .
Hm kaya aabutin pag natpos po ito sir? Salamat sa sagot
list of material ng roofing meron po sa video.
Pano ka maglalagay ng cleats dun sa dulo ng rafter?
used rebar
what does "LNM" means?
Linear Meter
I WANT THIS
TY
frame is not strong enough , should be 16 inches on center
Thanks so much.... Magkano po Ang na incur na expenses nito?
nasa list po yung mga materials.
Pwd po bang makuha ang sukat ng king post ng bahay na ito salamat po sa sasagot
#drawuppro #keepitsimple
Interior Design Ideas for Small House
5mx7m Modern House Design - 3 Bedrooms
ua-cam.com/video/lIuz8wWHkEw/v-deo.html
#TinyHouse3d #3dHousePlans
#clerestory #tubular #kingpost
Clerestory Truss Design - Tubular Truss
ua-cam.com/video/zN7uqgab1HA/v-deo.html
#drawuppro #keepitsimple #estimate
How much total xost
Ask ko lang, ano ang advantage ng ganitong style ng roofing vs. kuwadro aguas?
Mas matibay ang cuatro aquas or hip roof sa typhoons.
@@teamhans4856 Ok. Maraming salamat and God bless!
passive cooling design po yan..
Name of apps idol?
sketchup bro.
mgkano po maggastos pg gnitong bahay
750k-900k, depende po sa location..
God damn I'm so headache with this rotation
Hello po mgkanu po total cost nito sir slamat po sa reply
nasa video po lahat ng materials. depende po sa location po yung cost.
matatag po ba yan sa bagyo?
Nasa pag gawa po yan.
Is it wind resistance 🤔
same question