Your explanation and the way you show how to connect circuit in your every video is OUTSTANDING AND INCREDIBLE,,,,,,,,,, Thank you very much for making the helping video 😊😊😊😊😊😊😀😀😀😀😄😄😄😄😇😇😇🤗🤗🤗
hi bro, you are the only one who explain in simple steps and in english. Ruquest you to kindly make one more video how to connect bulb (for incubator purpose) and with ac power supply.
Hi there, you saved me pulling my hair out. I got adjusting all the levels and didn't make sense. Thanks for getting me to reset and enter the set temperature with a quick push! Appreciated
Thanks, I built a thermal electric refrigerator from a Peltier cooler and a Styrofoam box. I've got one of these thermostats included on it . I forgot how to use it.
Bro can you please suggest me that by using this kit can i control cooling tower fan by sensing water temperature..... Hope u'll give reply to my question thank u...
Thanks great project easy steps to follow. I just completed a HP 12V 750W power supply looking for something to fill the day this was perfect. Can you point me to the data as to how many 12V appurtenances are permitted ganged from the sensor??
@KSY CREATIONS. Nice video and explainaton. I understood this module because of u. I want to use this in my celing fan .will the power supply be same or different.pls help me
Very nice and helpful video.. But I have a question. If i connect a ac bulb or heater with this connection will the dc fan will burn out?? I mean what will i have to do to to run the heater or bulb beside this cooling system? Please reply.
Is there a part number for the entire device, or just a kit. Also, can it be adjusted from 68 C to 110 C for automatic transmission cooler with thermistor outside on piping? Thanks. I would like to get!
Thanks for the video, would you or anyone reading this comment happen to know if its possible to replace the buttons with a dial switch? To turn the knob left or right in order to bring the temp up or down? I think itd be awesome instead of pressing buttons hundreds of times per week ( at least personally for what I have in mind)
I have a question. I have one of these that are very similar except the controll board is in a black box to protect. There are still 4 connectors-- but on the back and it goes like this from left to right: + - S1 S2. I assume S1 is like KO and S2 is like K1??? So I tried to figure out the connections but it fried the switch. Ordered a new one but I'm still confused. It is for a fan.
I have a question, if I switch off the 12 volt adapter power connection after setting up the temperature adjustment. Then when once again switch on the power the temperature setting once again required for adjust or not? Please reply.
Is it possible to Power the thermostat with 12v 606 transformer?? Is there any problem.I need thermostat to get 37.5v.Also I need to connect cooling fan.
this module works on 12v and output from the module is 12v, if overvoltage is connected module may damage. if you want 37.5v output, here is another way, ua-cam.com/video/avBkPuIByZI/v-deo.html follow the video, in this video, I have used 220v, but instead of 220v you can connect 37.5v
can i use this module in audio power amplifier heat sink stage? if yes then when i switch off the amplifier each time the relay module get switched off so how it reminds its temperature in memory ?
Hi Great Video! Can I use same circuit for controlling water in a pipe (pressure ~4 bar, flow 10 lit/min) Will the sensor stand against water? Pl guide Thank in advance!
@Shrikant Kashid >Place thermistors sensor bulb on the outside of the pipe. Clean and use thermal paste. Nylon sip ties or common metal worm clamp. Do not over tighten and risk damage. Adjust up or down as needed to predict the transfer of heat/cold inside the pipe to the outside. Hope this helps. Auto ASE Master Tech-Retired.
Hi. Thank you for this video. Is it possible to increase the temperature setting to above 200 deg C ? I am looking for a circuit that I can incorporate with my laminating machine that has no temperature meter. I hope you are able to provide me other option if the module you showed here will not work. Thanks again. Shalom
I need little expert help. My AirConditioner outside has a heat sensor when outside temperature is above 35 C it cools alot below 35C everything is fine as per its compressors working . Is there any way i can fix the temperature of sensor no matter how hot outside it gives the inside system temperature of 34C fixed any way possible ?
@@KSYCREATIONS-sandeep-k I want to use for air condition, my thermostat has always problem , I have 3 till now. So I was thinking if you could suggest some board.
Bro can you please tell me, how to set maximum temp. and minimum temp. I want to run peltier ac within range of 0°c to 20°c. How should i set this temperature controller,please explain in detail.
Fiiiiinalllllyyyy! Someone who's video actually shows how to connect all the positive and negative wires!!! Thanks!
Thank you.
Yes, thank you so much for that one. Do you have one for the module with two displays?
@@brianwheeler1139 I use a 2 display unit. same hookup, works great.
Thanks for this! So much simpler than the complicated wiring diagrams I've found
Holy crap!!! After weeks of searching how to wire this up. You have offered the best and clearest instructions. Thank you!! Thank you very much!!!
welcome pre10der.......
Is same way , can I connect a bulb with module ??@@KSYCREATIONS-sandeep-k
@@motosurfers6946 hi, yes you can connect light as well in same way.
@@KSYCREATIONS-sandeep-k Thank You very much sir , you texted me back , have a great life ahead
Your explanation and the way you show how to connect circuit in your every video is OUTSTANDING AND INCREDIBLE,,,,,,,,,, Thank you very much for making the helping video 😊😊😊😊😊😊😀😀😀😀😄😄😄😄😇😇😇🤗🤗🤗
does it work only 12 v battery or even work with 9 v battery
indians are the best teachers thanks buddy
hi bro, you are the only one who explain in simple steps and in english.
Ruquest you to kindly make one more video how to connect bulb (for incubator purpose) and with ac power supply.
hiii, thank you, I will definitely make another video...
Hi there, you saved me pulling my hair out.
I got adjusting all the levels and didn't make sense.
Thanks for getting me to reset and enter the set temperature with a quick push! Appreciated
Thank you! Absolutely no help elsewhere to figure out how these things are supposed to be wired!
Thank you brother, after hours of trying.....only yours worked
Great video. I struggled all day to get my 12v working, now I know why it wouldn't work. Many sincere thanks.
thank you...........
Very easy and clear way of demonstrations 👍⭐⭐⭐⭐⭐
Great Video, Saved my skin as to how to wire the switch up.!!
Brilliant and much appreciated for the concise demonstration Sandeep.
Omg!!I thought it was an Big deal to make it..but u made it very simple..thq bro fr ur info!!
Please answer me set incubator in fan and bulb
Thanks, I built a thermal electric refrigerator from a Peltier cooler and a Styrofoam box. I've got one of these thermostats included on it . I forgot how to use it.
Very good demo.i m your student.from Pakistan 😘
Thank you for a great, informative video on the W1209 type modules. Just what I needed!
😉👍
Excellent. Also let's know how to connect the bulb with fan to use in incubator. Thanks.
Simple and clear video good bro
Woow nice instructions..thank alot bro...bro would you please show us how to connect thermometer ; electric bulds with Ac fan at the same time
Bro can you please suggest me that by using this kit can i control cooling tower fan by sensing water temperature..... Hope u'll give reply to my question thank u...
Yeah really useful video was thinking what is this thermostat is now I got this
Thanks great project easy steps to follow. I just completed a HP 12V 750W power supply looking for something to fill the day this was perfect.
Can you point me to the data as to how many 12V appurtenances are permitted ganged from the sensor??
@KSY CREATIONS. Nice video and explainaton. I understood this module because of u. I want to use this in my celing fan .will the power supply be same or different.pls help me
Thank you sandeep. You're my life saver.
🤝👍
Қазақстаннан жалынды сəлем! Өзіме керекті мəліметті алдым. Рахмет ! 👍
😀👍
Привет. Если нужно подключить температурный регулятор xh-w3001 к реле, то на моем канале есть видео
Thank you, I've understand all.... the best video guide!!!!!!
Thank you for your excellent detailed toturial !!!
Thanks, that's exactly what I was looking for
muchísimas gracias por tu explicación, clara precisa y concisa
Nice
Brother I want to run fan when temp below set point?
Then setting will be what
Very nice and helpful video.. But I have a question. If i connect a ac bulb or heater with this connection will the dc fan will burn out?? I mean what will i have to do to to run the heater or bulb beside this cooling system? Please reply.
Thank you very much! This was very clearly exlpained and very useful.
Thank you ........
THANKS FOR THE VIDEO MY FRIEND .....VERY HELPFUL
Thank you for tutorial man!👍
Very nice video sir, thank you.🤩🤩😍😍
Sir Can i run 3, 12 volt cpu fan in parellel with this temperature cotroller
What is the use of P1 to P7.. appreciated if you explain each setting just like this way..
sandeep,how do i use this w1209 with ramps ,or do i hv to use it as independent one
Super explained bro
Hey Sandeep can you suggest a case for the same
Is there a part number for the entire device, or just a kit. Also, can it be adjusted from 68 C to 110 C for automatic transmission cooler with thermistor outside on piping? Thanks. I would like to get!
you are best brooo
Hiii, yours pleasure.....👍
Do you know how to connect a 12v DC fan with Selec TC303 temperature controller??
thank you. can I use my 5v usb fan on this thermostat?
Thank you soo much for this review
Thank you. Very well explained.
Thank you. I know how these things work :)
Thanks for the video, would you or anyone reading this comment happen to know if its possible to replace the buttons with a dial switch? To turn the knob left or right in order to bring the temp up or down? I think itd be awesome instead of pressing buttons hundreds of times per week ( at least personally for what I have in mind)
Awesome very, very informative. Thank you so much for this.
hi sir,thanks for your video.Can u advise me how many fans do we can fix?
hii, if 12v fan means you can add 1 fan, if 3v fan means 4 fans....
I have a question. I have one of these that are very similar except the controll board is in a black box to protect. There are still 4 connectors-- but on the back and it goes like this from left to right:
+ - S1 S2.
I assume S1 is like KO and S2 is like K1???
So I tried to figure out the connections but it fried the switch. Ordered a new one but I'm still confused. It is for a fan.
I have a question, if I switch off the 12 volt adapter power connection after setting up the temperature adjustment. Then when once again switch on the power the temperature setting once again required for adjust or not? Please reply.
Hi, no need to adjust again, once you set the tempurature, module will store the settings.
@@KSYCREATIONS-sandeep-k thanks
Awesome, thank you very much.
Also please explain how to connect bulb in that relay so that it can be used in incubator
Hello friend
My question is how can I contact 12V fan and 110V in one thermostat w1209
Thanks for your help
Hi sir, at a time we can connect either fan or 110v, there is no provision to connect both at a time in this module.
Excellent video
Very helpful, thank you so much!
This is very helpful sir can you please help me with the program
Hi, there is no programming for this module. It requires only some settings
Can I connect 4 fans and 2 cooling pads at a time ?
Can the thermostat sensor wire be extended If so will the accuracy change ?
do video for incubator temperature settings in temperature controller board..by using 12v plimint
can i use mobile charger....? hope u will reply....
Hi, module works on 12v, module cannot be operated on mobile charger, as mobile charger is around 5v.
@@KSYCREATIONS-sandeep-k u got a new subscriber........ lv u
hey can i use this on my bike .. i just purchased it
Mantap... Im from Indonesia
good video....but you don't explain to us what the settings p 0 to p 8 mean?
Just what I was looking for! Thanks.!
hiiiiii, your pleasure................
@KSY CREATIONS can i get DC and AC output same time with w1209?
More videos for incubator settings totally pls bro
Is it possible to Power the thermostat with 12v 606 transformer?? Is there any problem.I need thermostat to get 37.5v.Also I need to connect cooling fan.
this module works on 12v and output from the module is 12v, if overvoltage is connected module may damage. if you want 37.5v output, here is another way, ua-cam.com/video/avBkPuIByZI/v-deo.html follow the video, in this video, I have used 220v, but instead of 220v you can connect 37.5v
Tnx sir..you are the answer of my confusion..
How can I connect electric bulb in the same control for heating in an egg incubator, ?
System on and off at 2 minute gap.. Is it good or fast cut off for system?
can i use this module in audio power amplifier heat sink stage? if yes then when i switch off the amplifier each time the relay module get switched off so how it reminds its temperature in memory ?
Hi, once you set the tempurature, it will be saved. No need to set each time.
@@KSYCREATIONS-sandeep-k ok, ty
Is it possible to increase the length of a sensitive wire with a regular copper wire?
Hello Sir
can you please tell me where can I order timer and thermostat and Turner and other things
Thanks
Hello sir , all are available on Amazon
U can try online....
Thanks for the video, help me setup a pc fan!!
Can i use this thermostat to turn on and off a 12v Peltier cooler instead of a fan?
Hiiii, you can use.....
@@KSYCREATIONS-sandeep-k awesome thank you and great video! 👍
thank you for your information
Nice,video bhi
What type of wire do you use? What thickness?
Hi, you can use normal wires, it doesn't required specific gauge wires, as it is running on 12v
Thank you very helpful 🙏🏻
Very good video...
Hi
Great Video!
Can I use same circuit for controlling water in a pipe (pressure ~4 bar, flow 10 lit/min)
Will the sensor stand against water?
Pl guide
Thank in advance!
@Shrikant Kashid >Place thermistors sensor bulb on the outside of the pipe. Clean and use thermal paste. Nylon sip ties or common metal worm clamp. Do not over tighten and risk damage. Adjust up or down as needed to predict the transfer of heat/cold inside the pipe to the outside. Hope this helps. Auto ASE Master Tech-Retired.
Will this work for a heating element, or will it draw too much voltage from the thermal-relay setup and make it shut off due to undervoltage?
I guess I could just try. :D
Can we connect both dc fan and bulb for incubator pls reply
Hi, we can connect only 1, either light or fan.
If we connect both fan and light then what is going to happen and can u make video on how to make incubator pls
If we connect both together, fan and light will work together, on and off same time.
Sir which size dc fan should i use in incubator ( in Inches)
Awesome video in great detail, thanks!
Hii, thank you..
can be use this w1209 in usa ?
Hiii, Yes you can use, it's available In usa
Thenkyou sandeep sar
Sir, can I use 12 volt 2 amp transformer
Hiii, if the transformer produce dc power u can use , this module works on dc power.
Sir how many AMP we are use
Hi. Thank you for this video.
Is it possible to increase the temperature setting to above 200 deg C ?
I am looking for a circuit that I can incorporate with my laminating machine that has no temperature meter.
I hope you are able to provide me other option if the module you showed here will not work.
Thanks again. Shalom
Use a potentiometer in series with the NTC. Calibrate before using
I need little expert help.
My AirConditioner outside has a heat sensor when outside temperature is above 35 C it cools alot below 35C everything is fine as per its compressors working .
Is there any way i can fix the temperature of sensor no matter how hot outside it gives the inside system temperature of 34C fixed any way possible ?
hiii, I am sorry to say that it is not possible because everything is controlled by a microprocessor, it runs as it is programmed.
Hi Sandeep I have some doubts about some other module plz tell me how should I contact you
You are best genius
hello sohil noor, thanks for your compliment.
Good
Can I use this module in conjunction with the air conditioner in my room?
Hi, air conditioner consumes hi watts, module relay is for low watts around 200w to 300w....
@@KSYCREATIONS-sandeep-k great , but can you suggest some economy board.
@@KSYCREATIONS-sandeep-k I want to use for air condition, my thermostat has always problem , I have 3 till now. So I was thinking if you could suggest some board.
Great bro...thanks..
Brother, At 1:51, why do we need to connect k1 and 12v positvie using a small wire strip? what would happen if we don't connect it?
hiii, if we do not connect the wire, the relay will not activate...
Bro can you please tell me, how to set maximum temp. and minimum temp. I want to run peltier ac within range of 0°c to 20°c.
How should i set this temperature controller,please explain in detail.
Perfect video!! Thanks Well explain!