Installing Maxpeedingrods Coilovers on the E46!!
Вставка
- Опубліковано 9 лют 2025
- Installing Maxpeedingrods Coilovers on the E46!! in this video we install some set of coilovers on the e46!
15% off code:joe
coilover link :www.maxpeeding...
maxpeedingrods link:www.maxpeeding...
@MaXpeedingRods
/ maxpeedingrods
My car is a 2004 G35 Coupe 6MT Brembo Package Desert Platinum and has Muffler Delete exhaust
Follow my instagram at @thejoevazquez
SUBSCRIBE FOR MORE G35 VIDEOS! ua-cam.com/users/c...
WATCH THE PREVIOUS G35 VIDEO! • EVERY G35 Owner Do Thi...
Mod List:
Motordyne 5/16 plenum spacer
Motordyne mrev2 lower plenum
BC Racing True Rear Coilovers
Spec D Led Headlights
Nismo Z tube with JWT Pop charger intake
CZP 3.5" Aluminum Driveshaft w/ Foam Noise Dampening
Dasaita 10.2 inch Large Screen Double Din Android
Oil catch can
Custom Cutout exhaust
06-07 Updated Tailights
Hotchkis Adjustable Stabilizer Sway Bars
Roof wrapped in aAvery gloss black wrap
Idler pulley delete
19" Forged Rays wheels
Reverse camera installation
redline custom steering wheel wrap
coolant bypass valve
energy polyurethane front upper control arm bushings
simplistic garage 75mm big bore throttle body kit
noico sound deadening on trunk, rear seats, and doors
z1 stainless steel brake
z1 brake master cylinder brace
370z Nismo 3.916 rear differential with nismo differential cover
z1 motorsports differential bushings
heavy weighted shift knob
energy compression arm bushings
gktech 10mm tie rod spacers
oem 370z axles and wheel bearings
For BMW E46 Coilovers Review
BMW E46 "Ebay" Coilovers Review & Install(MaXpeedingRods)
Are Maxpeedingrods Coilovers worth Your money? Honest review.
Exposing Cheap Coilovers! MaXpeedingRODS Review
Unboxing Maxpeedingrods coilovers for my BMW e46 330i
maxpeedingrods coilovers e46,maxpeedingrods,e46 coilovers,maxpeedingrods coilovers,driftland uk,e46,maxpeedingrods turbo,m3,ebay,drift land,rx7 fc,e46 drift,e36,bmw,e36 drift,ebay coilovers,coilover install,maxpeedingrods coilovers mustang,coilover,lowered,coilovers,driftland scotland,stance,maxspeedingrods,bmw e46 coilovers install,maxpeedingrods coilovers review,driftland tv,bmw e46 coilover install,rotary engine,maxpeedingrods coilovers install,suspension,maxpeedingrods coilovers e36,drifting,turbo rotary,maxpeedingrods coilovers adjustment,e36 drift missile,bmw drift,best coilovers,cheap,bmw e46 coilovers,cheap coilovers,bmw e46 coil overs,bmw coilovers,e36 best coilovers,second gen rx7,maxpeedingrods coilovers 350z,maxpeedingrods coilovers miata,maxpeedingrods coilovers dampening adjustment,maxpeedingrods coilovers civic,maxpeedingrods coilovers dampening,cheap coilovers vs expensive,cheap coilovers review,drift my ride,maxpeedingrods rods
Check out my podcast! Chip & Joe Show: / @chipandjoeshow5205
z1 master cylinder brace,noico red,noico sound deadener,z33,spec d headlights g35,throttle body coolant bypass,z1 brace g35,gktech tie rod spacer,noico 80 mil,z1 motorsports,g35 mods,gktech 350z angle kit,g37,dasaita 10.2,bc racing coilovers,bypass valve,g35 build,motordyne g35,stainless steel g35,stainless steel brake lines g35,static garage,370z,nissan,g35 modded,vq35,v35,g35 coupe 5 things i love about my g35,g35 muffler delete,g35 mods,skyline 350gt,motordyne,g37 ipl coupe,skyline 350gt review,2007 g35,loud g35,2008 g35,2004 g35 cars car how to top 5 tj hunt toyota nissan gtr jdm static nissan infiniti g35 coupe g35 coupe mods g35 meet Infiniti G Joe Vazquez g35 coupe mods g35 mods g35 muffler delete infiniti g35 infiniti g35 coupe 2004 infiniti g35 coupe g35 headlights g35 tail lights infiniti g35 muffler delete G35 Coupe Tricks - Key FOB and Interior Tricks Small Upgrade EVERY G35 Owner NEEDS!! G35 How to Program Key Fob!! Top 3 G35 Mods EVERY Owner NEEDS! How to program a Infiniti G35 remote key fob 2003 - 2006 HOW TO PROGRAM G35 KEYLESS REMOTE * G35-Top PERFORMANCE MODS* Installing My Spec D Headlights On My G35!! How to program Infiniti Keyless Entry Remote Keyfob Replacement Programming
Thanks for watching guys!
E46 content say waaaaaaaaa!!!!
Use Code JOE for 15% off your entire order on www.maxpeedingrods.com/
1:45 look at the picture on the left
I know my comment is late but what should I do if I tightened one side and the other one won’t tighten or loosen, it just keeps spinning
Why isn't there a "C-BRACKET WITH SLIP ON LOCK BRAKE LINE 88 RX7??
My car sounded the same,is it the damper?
Update?
Master tech approved 👍
Let’s goooo!!!!
Hell yeah
Yee yee
Did you guys use the same end links or did you need to get smaller ones? that’s the only thing that’s keeping me from buying these
did you end up getting them? Js ordered them and i been looking around to find out what size sway bar end links i need, There’s hella adjustable ones out there but i really don’t know what size specifically so for rn I’m gonna wait to get them and measure.
Just grab any adjustable ones on ecs and adjust to fit? Im about to do the same to my e46 , had to do it before on my miata im assuming it'll come out the same 😅
Dayum dude clean.
Hoyahh!
Mines is knocking on the rear right on bumpy. And twisty roads. I am trying to find out why is it doing tjat hopefully it didnt break already because they're somewhat new
So check the top of the shock where it bolts up to the shock tower and tighten all three bolts up there
The middle bolt you’ll need to wrenches to tighten it properly, this is most likely to be the reason that they’re doing that
@@JoeVazquez ok Ill go check it out thanks.
@@Ayixlia any updates?? I’m building a budget track car, and saw these. It will be driven hard on corners
Bro both are great!!
HAS YOURS STARTED TO RUST ON THE SHOCK ABSORBER? MINES ARE 8 MONTHS BEEN ON CAR COMPLETE RUBBISH
No rust at all actually!
@@JoeVazquez did U check both front and rears?
Yes! Zero rust at all, where do you live?
@@JoeVazquez from aus. But that's not the point no one can escape rain
Hasn’t really rained hard at all in California so they haven’t been tested through that over here
Ima be getting these tomorrow and I don’t want my car to be low I want it to be high so how do I make it higher
You loosen spanner nuts and spin counterclockwise to wanted height, then lock spanner nuts and that’s all!
@@JoeVazquez ok cus i have an e46.. its a 2001 bmw 330ci 5 soeed manual annnndd.. w.e coils this thng is on its extremely bouncy to where i csn even shift right at all. And im in milwaukee on the northside. The roads are so discusting down here.
@@JoeVazquez and how are they now this video is 2 years old now. They holding up???
How’s it been holding after a year ?
Still good! He Daily’s his bmw still and has 0 issues
Did you run the back spring with or without the adjuster?
With but on almost the lowest setting so the spring could actually fit!
@@JoeVazquez so the springs don’t fit on the car if I don’t use it?
You can choose to delete the adjuster, a lot of people who are looking to slam their car do that.
@@JoeVazquez alright thank you and did you Mac out the back strut or no?
No we still had a good amount of room left to lower, he wanted it to be slightly lower to fix the wheel gap but still good as a daily
saw this video when it dropped because ive been in the market for coilovers and came back to see how they’ve held up. Are they worth it?
They’ve been great, Thomas has had zero complaints about them, great bang per buck
Please, don't buy these. I bought them in a pinch for my E46 drift car. 1 event and 5k miles later my front passenger side is blown. Please save up and get something better. Please.
@@nolanisaginger I was just about to buy them next week loll, but teins been looking tempting. thank you.
@@jrp3197 definitely go for those. Literally anything but these 😂
We definitely haven’t tested them out in drifting events but as daily drivers still working great, I had my doubts but both pairs are solid so far haha only time will tell though 😬
I want to get a new suspension my 330ci rides a little stiff hits hard on bumps what would you recommend for a smooth ride
Is it stock suspension?
@@JoeVazquez yea
@@JoeVazquez I can literally feel every crack on the street 😂
You feel everything because your bushings on your control arms are probably fucked. If you’re gonna change your suspension, you’re gonna need to change your bushings first.
I just installed Solo Werks S1 on my 2005 330ci. I was actually surprised how comfortable the ride is. Not bumpy at all
bout to slam my car on max pp rods
Let’s gooooo!
I love cars
Seriously hear nothing but horrible reviews on these things besides the guys that are sponsored by them on UA-cam… strange af
I’m not getting paid by them, maybe they send us different units? I’ve had two sets and literally no issues!
@@JoeVazquez well, them sending you a free product/gift to feature them, and partner along with a Promo means you got sponsored. Now, i wish these are good, i’m gonna do more research (i can’t expect much from cheap coils)
I understand BUT they say I can review them and see what I think but there’s no way in hell I’d lie and say they’re good if they failed or aren’t up to par. A lot people also don’t check the middle bolt and get “knocking” and are quick to blame the product, we came across that and went to retighten all the middle bolts and no knocking after that at all. Maybe they might have quality control issues where not every product is the same but PERSONALLY on two sets we’ve had no issues. Budget coils are just that, budget coils
@@alejandroochoa3541 what's the toque spec on the middle bolt
Just tighten them a little bit more than snug and you’ll be fine, they don’t provide any torque specs so you just want to make sure that you check all of them! One person said his was knocking and tightened the middle bolt and it went away, very common thing to not be tight on the coils!
I know my comment is late but what should I do if I tightened one side and the other one won’t tighten or loosen, it just keeps spinning
Update?
He still is running them! he said that one coilover is leaking though some fluid out meaning the seal failed on it
Hmmm so these are good for about 2 yrs? I was looking forward to the upgrade t7s
I know my comment is late but what should I do if I tightened one side and the other one won’t tighten or loosen, it just keeps spinning