Cyconxc this is the best RC trophy truck i have looked at for the past few years....Every little detail is replica exact very custom bro i wish you were going to build production you could make money if there were a price....
Thanks Lukas. It's great to hear from people that have been subscribed for a while because you guys have seen the whole process o getting to this point. Thanks again for your support!
Looking good. I run the 550 castle 4 pole but its geared really high to make up for the gear reduction. Also, I might look into making a custom front shock mount because the stock rustler one is at a horrible angle for long travel. Awesome video!
Oh you run the 550? So the 2400kv? If it is that's a great motor, it can handle a lot of heat. But for your shocks you should definitely look into getting the protrac tower. It has wider mounting spots so it sets it up much nicer. That's what I used to use. But thanks!
Okay ill look into it. The can is 550 length but the diameter is still 540 its a nice motor. Its super torquey but I wish it had higher top end like my 3800 kv 540.
epicalbanian23 I'm not sure. They only way that it would last is if you anodized them. I would think about it, but I couldn't match the front ones in the rear.
Hello are you still building these? Your frame design is outstanding! I have 40 years sand dune experience. ATV/UTV, Sandrails. Done it all. I live on the sand. I'm into RC too and this rail design I'm interested in. I know what it would take to build the most amazing RC sandrail. I can see some little changes needed with trailing arms/a arm/weight distribution for extreme running but frame is great. How can I get a frame like this?
Thanks man!!! :D I'm really happy with how the panels came out, ended up being just how I planned ;) But I haven't officially weighed it so I'll get back to you on that ^^
Thanks! I've only been asked that once, but I do plan on making an interior. I'm going to mold the main shape with foam and then vacuum form it with lexan. After that I'll put the driver/co-driver on top :)
Yes at some point! Remember I've only had it "finished" for a few weeks now. I have to continue to test and make sure everything works fine with it before I paint it..
is there a way we can pay you to make just the cage? you make the best cages I have seen, and I dont have a welder or the money or space to buy a whole welding setup, when its just to do one or two projects, I would rather just pay someone a couple hundred for the cage and that be it! :D
Dude Very nice truck! I watch all your videos and I was wondering if you could make the Exact truck like how it performs with all your exact parts in your videos. willing to pay 1500 or more. Please reply back on Fb
i would rather pay you to build me this same truck then to buy a name brand rc..... awesome truck man!!!
Cyconxc this is the best RC trophy truck i have looked at for the past few years....Every little detail is replica exact very custom bro i wish you were going to build production you could make money if there were a price....
following your channel for a while now... your project is so sick!
my kudos to you!
keep it up!
Thanks Lukas. It's great to hear from people that have been subscribed for a while because you guys have seen the whole process o getting to this point. Thanks again for your support!
Love this truck man, it makes me want to build one XD
Looking good. I run the 550 castle 4 pole but its geared really high to make up for the gear reduction. Also, I might look into making a custom front shock mount because the stock rustler one is at a horrible angle for long travel. Awesome video!
Oh you run the 550? So the 2400kv? If it is that's a great motor, it can handle a lot of heat. But for your shocks you should definitely look into getting the protrac tower. It has wider mounting spots so it sets it up much nicer. That's what I used to use. But thanks!
Okay ill look into it. The can is 550 length but the diameter is still 540 its a nice motor. Its super torquey but I wish it had higher top end like my 3800 kv 540.
Really great job! Panels came out great. Overall amazing work . Can't wait to see a edit video!
Thank you! I'm glad you guys like the look! Hopefully I'll be able to go and shoot this weekend!
Almost at 5k buddy!!!!! Good work!!!!
Yeah man! Thanks! >:)
Awesome truck ,looks minted
Dazzlelaa Thanks dude
Ever thought about using the scale King shocks? They are sick bypass shocks.
Not really. They aren't long enough and I didn't like that they were blue. They are pretty cool though.
CyconXc Wouldnt you be able to paint them a diff color? ive seen some red and green ones. both custom tho..
epicalbanian23 I'm not sure. They only way that it would last is if you anodized them. I would think about it, but I couldn't match the front ones in the rear.
I figured, use the kings for the rear for the scale look..?
epicalbanian23 No that's the problem, they would be too short. My rears right now are 145mm xD
That is real nice brother!
Thanks man! Finally coming together :)
Your truck looks really realistic, great work! Subscribed :)
Thank you man, welcome to the channel!
dude this is sick, thumbs up.
Thanks bro!
Jesus buddy.. How far along has this build been coming.
You do incredible builds bro!
Thanks Dan! :)
Hello are you still building these? Your frame design is outstanding! I have 40 years sand dune experience. ATV/UTV, Sandrails. Done it all. I live on the sand. I'm into RC too and this rail design I'm interested in. I know what it would take to build the most amazing RC sandrail. I can see some little changes needed with trailing arms/a arm/weight distribution for extreme running but frame is great. How can I get a frame like this?
Getting there soon b finished mate like the carbon sweet
Thanks Son you're right, almost there!
Very professional Video again, thumbs up for it! The hole cage now looks absolutely breathtaking^^ Btw: How heavy is this beast now? (Ready to Race)
Thanks man!!! :D I'm really happy with how the panels came out, ended up being just how I planned ;) But I haven't officially weighed it so I'll get back to you on that ^^
Haha nice video, definitely better than what i got.
Thanks Joey, lot of hard work went into making this
Hello, my friend, very top your project, you would have a project with the measures for the confection chassi
Instant like bud. Keep it up
Thanks as always man!
Why did you switch from Castle ESC/Motor on the NSP-1 to Tekin? Is there a considerable weight difference?
So dope
What is the rear axle? And did you make the rear arms or can you buy them somewhere?
Swwweeeeeet, Love It.
Might seem like a stupid question, but what are sway bars for?
can't you please make a beginners tutorial on how to make trucks/cages like this?
Awesome again!
I hope you don't get asked this all the time, but are you going to put in a driver figurine?
Thanks! I've only been asked that once, but I do plan on making an interior. I'm going to mold the main shape with foam and then vacuum form it with lexan. After that I'll put the driver/co-driver on top :)
Sounds great, this will look super in your low-angle videos :)
are you gonna make a new build thread for this? because im seriously thinking of making one!
No everything thing is still in the old one. I might make a summary page though, that has pictures of the finished truck along with specs.
What do you think about silversoldering a shassi together, will it be strong enough. Thinking about making a Bryce Menzies red bull trophy truck
Ruben Ostli Nope that won't be strong enough. Only options to make a cage are brazing, or TIG/MIG welding.
CyconXc what is different with brazing?
Ruben Ostli Brazing is usually done with brass, but instead of welding them you use flux and a blow torch. Look up a couple videos.
What's his front end set up. Like body posts, shock towers, a arms, etc.?
Ethan Crooks all slash 2wd
what shocks r u running in the front
is this your hand made???
Will you ever get the cage powder coated?
Yes at some point! Remember I've only had it "finished" for a few weeks now. I have to continue to test and make sure everything works fine with it before I paint it..
Did you custom make those trailing arms?
Anthony Martinez No these are the RC4WD hardcore arms.
dude imma have my chassis builder make me one. use wraith axle. this thing is riculously sik! nice work. subbed!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Eric Jimenez Thanks dude.!
is there a way we can pay you to make just the cage? you make the best cages I have seen, and I dont have a welder or the money or space to buy a whole welding setup, when its just to do one or two projects, I would rather just pay someone a couple hundred for the cage and that be it! :D
***** Thanks man, appreciate that. But we plan to start doing personal jobs/sales soon. I'll let you know when things get started up.
awesome! you can already count me in as a sale! if you wanna talk prices, chat, or just hang out online, look me up on skype, same name as on here
+Cyconxc hey how much would it cost if bought the supply but for you to put it together
+joshua alvarado i have a slash i want to convert it
what are those 2 pins next to the spear tires??
+Rasmus Joubert That's to replicate the fuel dry brake.
Where can I buy there your rc trucks at?
would you build me one of these if i paid you? just thought id ask. you do great work sir.
sick
you make the rollbar
where can i get design specs for the chassi?
Don't have any, sorry :(
How much would you cost to build another one for me
Aaron M I don't sell them, sorry.
how mutch money did that truck cost
+Clayton Anderson what is "mutch"?
como puedo comprar..
what kv is it
The tenshock is a 4600kv.
Dude Very nice truck! I watch all your videos and I was wondering if you could make the Exact truck like how it performs with all your exact parts in your videos. willing to pay 1500 or more. Please reply back on Fb