U1108 / dashboard, srs, power steering, CAN trouble fix
Вставка
- Опубліковано 21 вер 2017
- U1108 fault / dashboard, srs, power steering, CAN trouble fix
The autumn came. It's cold outside, I decided to plug the computer back in the hope that it will not overheat. For me it was a surprise that also disables power steering. Though now I understand. Damaged everything that is associated with the ECU via the CAN bus
Some people do not believe me and argue that the Multifunctional Display can not affect the dashboard troubles and engine performance. They say it's the battery terminals or alternator...
The multifunction display does not affect the operation of the engine. It affects the operation of the CAN network. Whith CAN, Engine Control Unit communicates with sensors and devices in the car. If somewhere in the CAN bus has damage - CAN communication is disrupted and ECU goes crazy. It may troubles or not work the dashboard, electric power steering, security system of the vehicle, the srs unit.
Diagnostics will show you fault code U1108 .. BUT she won't show you the specific cause of the error in the CAN bus !!!! In my mitsubishi, cause - the Multifunction display. It is bad soldered legs of the processor and it overheats. For this reason, in my car very strange worked the dashboard, the arrows jumped or fell while driving, glowed and flashed all the lights, error of abs and srs is not working power steering.
If it is disabled, work of all systems of the car immediately back to normal.
• Mitsubishi Сolt fault ... - Авто та транспорт
Man, thank you very much for the video, fixed my u1108/u1109 code issue on my Mitsubishi 2012 too. Passed smog with flying colors!!
I've had the same problem.
It appeared suddenly while driving, and did what you did.
Problem solved 👍🏻
Огромное спасибо!
Thanks this was driving me crazy I couldn't work out why my dash was flicking on and off and all warning lights were going off.
Solved my problem.
Thanks 👍👍👍👍
My display intermittently fails to show the ambient temp and instantaneous fuel consumption. As an ex tech I've wondered whether the CAN bus might possibly get totally messed up by a misbehaving controller, e.g. the display. Well, here's my answer. Big time! The display is now solidly on my to do list.
You really helped me solve the problem! Thanx!
I had exactly the same issue, same error code... and also here it was that center display which was faulty. Replaced it and the demon was exercised.
Hello, I have the same problem. You just unplugged and then plugged in and the problem goes away ? Should I buy a new display and what you mean with “the display needs to be repaired”.
Thanks a lot
Awesome! One question: how to remove that panel where the 2 airco's are mounted? I take that I cannot remove the display without first lifting that panel?
For anyone dealing with this: ua-cam.com/video/LdcMgyCRbUg/v-deo.html&lc=UgxRScuZEMDQLjyhrIl4AaABAg.9epWDbcYUR39esA1WoTCGo
unbelievable, great job ;-)
i have a 2011 mitsubishi eclipse with code u1109 and u1108. lights on the dash come on and the engine temp gauge stops working. i will try this and pray it works. thx for the video
@@bh25jay haven't gotten to it yet. I'll try tomorrow
@@bh25jay yep it worked!
@@bh25jay I unplugged the same two plugs he did in the video.
@@bh25jay just unplugged it
Hi, i have a japan colt, i have the same problem, but japan colt does not have board computer, can you tell me what is causing this problem in japan colt? What is a similar part in japan colt?
Thanks,
Добрый день, подскажите,автомобиль будет ехать без компьютера
Да
Здравствуйте, да
@@boomergarage спасибо
مرحبا يوجد لدي مشكلة بقساوة الدركسيون عند القيادة وكلما زادت السرعة اصبح قاسيا ملاحظة يوجد لدي نفس السيارة ارجو المساعدة ما السبب
Здравствуйте подскажите пожалуйста не светится приборная панель что может быть
Thanks man!
Hi. How can i reset SRS(airbag) light without obd? I accidentally remove the fuse and put it back on
@2:23 is where that airco panel is already loose so it seems. But how to do this??
Привет. Подскажи ты нашол причину этой ошибке? Я просто по английскому языку не помню.
Да. Замыкание ножек процессора в бортовом компьютере. Отключаешь его, проблема уходит. Несешь в ремонт телефонов, там пропаивают ножки.