Every great master should own this innovative tool
Вставка
- Опубліковано 25 жов 2023
- Teaching metal turning, teaching general metal turning.
Innovative and new daily methods in the field of metal turning, the method of operating the metal lathe, and identifying all its parts and the laws of metal turning.
The tools used in turning metals and the method of preparing them for work.
Daily positions on a metal lathe
Daily innovations on the metal lathe
Components of teaching metal turning, teaching general metal turning.
Innovative and new daily methods in the field of metal turning, the method of operating the metal lathe, and identifying all its parts and the laws of metal turning.
The tools used in turning metals and the method of preparing them for work.
Daily positions on a metal lathe
Daily innovations on the metal lathe
Components of metal turning workshops
The most important daily repetitive tasks in the field of metals
This is one of my favorites! You must use it all the time on hydraulic cylinders. Instead of removing material around a nick it forges it back into the scratch.
Берёшь накатку рубчатую для рукояток, заменяешь колесико рубчатое на подшипник подходящего размера, и вот оно счастье. 😅
Вы размышляете как токарь, а не как чел, наводящий суету ради просмотров.
Да не совсем так, шар который оказывает точечное давление в месте сопряжения с деталью упрочняет и выравнивает поверхность качественее, чем плоскость наружной обоймы подшипника. Проверено на практике.
a ball burnisher,very useful to improve surface finish and increase surface hardness on shafts that run in bush bearings.
Ball and roller type burnishing tools can also be used in a metal shaper to finish flat surfaces.
Thanks for the insight into the different cutting attachments and how to use them for the specific target. I come from more of a woodworking background, but these techniques are familiar to me from family members in the locksmith industry, just not from a detailed view. Thanks so much for this.
Great video, colleague👈👍😉
Awesome work in making that tool. I’ve been a machinist for 46 years and I can tell that you got it going on around machinery. Thanks for sharing.
Очень полезный инструмент!
This is another unorthodox tool like the shear tool that you don't see very often yet is does a unique and excellent job of leaving a beautiful finish straight off the lathe, nice work!!!
Завтра сделаю себе такой.Нужная штука!
Very good friend, congratulations.
Excellent design. Not only does burnishing leave a great finish, it also work hardens the surface. Out in industry, they finish holes by pushing hardened polished balls through them. Also they have roller burnishing tools that burnish holes as well.
Nice tool and I i like the way you made it, all done on the lathe
Nice tool. I have never seen that before but I like it
молодец полезная штука👍👍👍👍👍
Acabamento top
Parabéns
Станок токарный,а вот специалист универсальный.токарь,фрезеровщик,это очень круто
Undoubtedly, definitely, it’s a unique, unprecedented, unparalleled tool . Thanks always.
Fica um excelente acabamento para pista de retentor! Ótimo! 👏👍
Great tool. Well done!!
Wow nice job
Годная приспособа! Лайк
Great idea! It's going on my todo list.
That very nice technique I like this video especially the final product thank you for sharing the video to view I wish this channel more success
This is wonderful !!!! Super
عالی بود 👏👏👏👏👏
Da hora meu amigo parabéns
У кого нет, срочно преобретаем токарный станок для этой преспособы😂
Это говно всего лишь чтобы пустить пыль в глаза гладкостью поверхности .
Super jest to zrobione pozdrawiam serdecznie 👍👍👍👍
With our diamond point burnisher, we seem to get slightly better results burnishing with the lathe in reverse (opposite the direction used to cut the finish the bar). Can you tell any difference with your large-ball roller burnisher?
Many many congratulations, this is certainly clever ❤🙏👍🏽
В своей мастерской очень даже полезная штука, особенно, когда живешь в деревне , а не в крупном промышленном городе . Класс.
Very nice ball polisher
Великолепно!
wow thank you 😍
Kin amazing mate.
Lo felicito es ute un genio
Para que la ranura del tornillo que hace de eje del rodamiento ???
Great idea
Хорошая работа 👍
Ну да, фрезеровать сверлом - охренеть какая хорошая работа (нет).
Very good ♥️♥️♥️♥️
FANTASTICO GRACIAS COMPAÑERO TORNERO ESA MANERA DE DAR TERMINACION NO LA SAVIA GRACIAS
Es femenina. Una extraordinaria mujer. Es por eso que su trabajos tienen una buena acogida. Es muy meticulosa en los detallistas. Es un trabajo extraordinario.
Wow thanks, dang your good!
How much difference does it make in cutting and still ball finishing?
That is a fantastic machinist trick. Thankyou
Just trick , no more .
Полезная штука! Повышает царапостойкость материала,уплотняется внешний слой,получается блеск как при полировке! Однозначно зачёт
Трудозатрат много, а ценность изделия весьма сомнительна Повторять не стал бы.
Fiz muito esse acabamento só que ao invez de uma esfera de aço usava um rolamento
Buena broder!!!
Очень модная технология во времена не столь отдаленные, годиков этак семьдесят тому
What tool do those who are better than great masters require? I found this trying to find the answer, seems that this is one layer down in the hierarchy though.
My machining knowledge is very limited, is this a "finishing" tool?
Voces e muito bon mano
OK.very Good
Cool, but a design with the bearing remaining in the holder would be superior 🙂.
Красота!!!
A Mechanics Showcase
Ух ты. Ни шлифовать, ни полировать не надо! Почему я раньше об этом не знал? Просто чудо.
Вы токаря по мягкому металлу, по хлебу и по саду, это старо как мир
Потому что баран
I'd be interested in knowing whether a burnished finish would fare better than a ground finish using ever decreasing grit sizes down to 3000 grit or smaller followed by leather strop. This in application of o ring seals in high pressure pneumatic systems.....
Круто !!!!
Обкатка.Використовувалася ще з 60 років минулого століття.😊
Этот инновационный инструмент показан в журнале "Техника молодёжи" лет 40 тому назад. Но напоминать нужно. Кстати надо напоминать, что пользоваться им нужно аккуратно, иначе происходит наклёп.
Накатка, упрочнение поверхостного слоя наклёпом, накаткой, совсем не ново, так упрочняли цилиндры на ЗИЛ 130.
Hola muy bueno
Good👍
Brilliant
Bom dia suas ferramentas são muito boas é eu aprendo muito com você gostaria de saber como eu faço para usina r a partir interna de um rolamento cônico obrigado.
Tornea un pedazo de hierro o acero, le das la conicidad del rodamiento, pero dejas un poco menos de longitud para presionar con el punto giratorio o contrapunta. Si la conicidad es menor a tres o cuatro grados, no se queda pegado con la presión de la contrapunta y un golpecito lo zafa, después del torneado que vayas a hacer. Si es menor a dos grados de inclinación no hay necesidad de presionar con la contrapunta o cabezal móvil: así como se monta un cono Morse en el cono husillo.
Это не мастерство а сплошные нарушения техники безопасности
Very nice finish, but the ball will also wear the inner walls of its parent tool as only the rear is designed to take the load. How long does the tool last before requiring a new ball holder?
It doesn't have to be a ball. Just a bearing alone mounted so you can use it's outer race as the surface that contacts the work will also do the same job.
Metal spinners have used similar tools for over a hundred years.
Parabéns belo trabalho.
👏👏👏☺️ 🤩👍🏿
*Let the Sunshine In...*
Laminado superficial por esfera o por rodillo, muy utilizado para mejorar las superficies en materiales suaves principalmente, proporcionando una mayor dureza superficial y menor rugosidad.
Гениально
Как хорошо что я не великий мастер.
A very useful tool to support work 👍👍
@tukangumpruk4546 : It is NOT, it is the opposite...
It is a bull shit ! This is for those who don't understand anything about it !
каждый великий мастер с СОЖ работает
Наш великий мастер начал видео с попытки фрезеровать сверлом. Какая уж тут нафиг СОЖ...
👏👏👏👍👍👍✊✊✊
GOOD DAY FRIEND FROM VENEZUELA THE BALL USED IS MADE OF ROLINERA OR A SPECIAL MATERIAL.
THANK YOU
Couldn't you just use the outer diameter of a ball race to get a similar effect? How can you get into a corner with something like this?
افرین
Пойду делать. У нас, у каждого по 3-4 станка в гаражах стоят.!!!! 🤣 Шутка. А вот за идею -5+++!! 👍 гениально. 3-и в одном - шлифовка, полировка и уплотнение металла!!!! 🤝👍
Ok❤❤❤❤❤❤❤❤❤❤
Это старо, как мир. В позднем СССР применялась технология алмазного выглаживания и упрочнения поверхностного слоя. Также применялся эльбор.
Че по размеру после обработки ? 🤔
где взять токарный станок не знаешь?
Купить. Другого ответа не будет(
чтобы сделать не нужную херню ВАМ ПОТРЕБУЕТСЯ ТОКАРНЫЙ СТАНОК. ЭТО ПРОСТО ГЕНИАЛЬНО
👌🏻
what effect did this have on the final OD of the part? or does this just move the metal around and doesnt make it smaller?
Innovative tool ? It's the main shop tool in any machine shop,the most important tool that made modern age possible.
Roller burnishing? Nope. Very uncommon except in hydraulics.
Listen on process....
Не е ли по добре поставянето на лагера във втулка, при обработка на стоманени изделия? При обработка на цветни метали е ОК.
Я в комментариях об этом написал.
Для того что бы получить выше чистоту металла нужно его закалить и тогда вы добьётесь 10 класс чистоты
А подшипник без шарика с этим не справится?
как придумать проблему, а потом героически с ней бороться. большие обороты, маленькая подача и закругленный кончик режущей кромки резца вполне способны решить проблему с шероховатостью поверхности, и изобретать ничего не нужно.
Такой чистоты поверхности не получить резцом, попробуй а потом советуй. Плюсом этой технологии также идёт упрочнение поверхности. Заменителем накатки является алмазный выглаживатель, тоже даёт такую чистоту и упрочнение поверхности.
@@user-nd8pp3zu7h , ладно, тогда для чего нужны эти извращения? Какое практическое применение?
Would you just keep on planishing it till you get it. That’s awesome. Is that just to get a more desirable finish….. meaning you prolly couldn’t get an accurate size say within a thousand of an inch could you? Just asking…that is awesome work you’re doing there. I’ve never seen a slot milled with a drill bit as I’ve always had the pleasure of milling machines in my life. Like I said up above I’ve been doing it since 1978 and you can teach an old dog new tricks. Thank you so much for sharing your talents.
ton reflet dans la pièce une fois polie n'a pas de prix 😂😂😂
And now this smooth surface is considered polished, and will the metal rust?
If its not stainless it will rust. This does not alter the alloy.
ok thx@@datadavis
👍
ай шайтан, что творит
((((:
I assume by the operation of this tool the workpiece diameter could be reduced by a 1/1000" or so if needed as well as a better finish.
As well as improved surface hardness
Мартышкин труд
Is there a difference in the distance between cutting and finishing which comes from the still bowl?
Use sistema métrico, é muito melhor.