Wow, the difference between "single fans" and "dual fans" is almost negligible. Nevertheless, the AK500 is an impressive air cooler, keeping that i5-13600k at a solid temperature even with a full workload.
This might be caused by the distance between 2nd fan and the case exhaust fan. it is too close and caused the hot air not transfered effectively. other test video shows rather big improvement with dual fan configuration.
Haw we can do distance for second fun 10-12 mm in real? I use Shadow Rock 3 and AM5. It use more slow fun with 52CFM and low preshure. I want use as a second fun silent wings 4, that has 1100 rpm, same CFM and more big preshure.
Good video, but I bet you will get better thermal results if you remove upper right exhaust fan due as it interferes with the air flow of the cooler specially your if intake is in the front. Edit : I am talking about the fan on top right of the case (exactly above the RAM).
@@treebreaker165 Does pretty good.... The 7700X and amd line up runs kinda hot.... 86C in Prime 95..... I did some bios config so it wont go past 70C.... didnt loose any performance doing the bios config
@@Gabbiano88 I have this cooler and the AMD 7 7700X, haven’t put it all together yet because I’m still ordering parts but I’d like to ask how it’s doing ? I’m probably going to be gaming a bit and wondering if you have any advice.
thx for this info. i was wondering if having 2 fans on this cooler will significantly cool the cpu, its seems like theres not much of a difference from 1 fan.
I bought and used it in the early days of CPU banding issues. There was a slight difference in temperature depending on whether it was installed or not, and now I use it because it is easy to wipe off the thermal paste.
If you are not considering separate overclocking, I think it will be sufficient. There are also dual tower CPU coolers that provide higher cooling performance for the price, so choosing the dual tower type would be a good choice in terms of performance.
Thank You for posting the video. I am thinking of getting the new digital version or new assassin 4 version when the are sold soon. .. up oakland Calilfornia is where I am.. up
This was great, thank you so much. I only have one question: what do you mean by "mode 9", "mode 5" and "mode 1"? I'm a total newbie, sorry if it's obvious. Cheers!
@@DalraeMyo thanks for the info! the motherboard i got is a Gigabyte unfortunately, and B660 chipset so i doubt i'll have that available. in any case i think the AK500 will be good enough for the 13600K still, i don't plan to run anything that stressful on it ever, so! :)
Unfortunately, I've never used ID-cooling se-207-xt slim, so it's hard to answer. However, in general, the dual tower type has better cooling performance.
What is the standard of being better? If you're not thinking about the design factor, the AK620 and AG620 offer much stronger cooling performance than the AK500 model.@@itachi7976
Change music to benny hill theme, it will pass to your test much better. 😊 And change the title of the video to "How to spent 250$ and fu ck up in 7 minutes")
00:48 ~ 00:58 6mm Heatpipe x 5
자막의 6개 오타입니다. 총 5개입니다.
(Six 6mm heat pipes in the video caption are typos. There are five 6mm heat pipes.)
Such a great find, that "low load" setting, you'd think big channels would have had your insight! Great video.
I am always looking forward to your videos. Thanks for the awesome content brother.
딱 제가 바라던 리뷰였습니다. 정보감사합니다
Nice test, made in real life conditions inside the case.
will on-die ECC (ODECC) , unbuffered ddr5 ram work well in msi mag series motherboard, as it states that non ecc and unbuffered ram is supported.
Wow, the difference between "single fans" and "dual fans" is almost negligible. Nevertheless, the AK500 is an impressive air cooler, keeping that i5-13600k at a solid temperature even with a full workload.
This might be caused by the distance between 2nd fan and the case exhaust fan. it is too close and caused the hot air not transfered effectively. other test video shows rather big improvement with dual fan configuration.
that Toughfan 12 Turbo is quite an upgrade to the thermals.
Haw we can do distance for second fun 10-12 mm in real? I use Shadow Rock 3 and AM5. It use more slow fun with 52CFM and low preshure. I want use as a second fun silent wings 4, that has 1100 rpm, same CFM and more big preshure.
Great video!! Thanks a lot!!
what "MODE9" and other modes mean, motherboard cpu_fan calibration?
Undervolting Preset step of MSI.
Good video, but I bet you will get better thermal results if you remove upper right exhaust fan due as it interferes with the air flow of the cooler specially your if intake is in the front.
Edit : I am talking about the fan on top right of the case (exactly above the RAM).
0:49 히트 파이프 6mm * 5개 아닌가요?
으악 오타가
5개 맞습니다.
Thx for video just ordered this for a 7700x…. Hope it’s good enough
How is it. It seems to be sufficient for the cooler.
@@hman6159 its sitting under the Christmas tree un assemble still... hype!
@@Gabbiano88 how is it
@@treebreaker165 Does pretty good.... The 7700X and amd line up runs kinda hot.... 86C in Prime 95..... I did some bios config so it wont go past 70C.... didnt loose any performance doing the bios config
@@Gabbiano88 I have this cooler and the AMD 7 7700X, haven’t put it all together yet because I’m still ordering parts but I’d like to ask how it’s doing ? I’m probably going to be gaming a bit and wondering if you have any advice.
Will this cooler cool the Ryzen 7700 65W version well?
which one would you recommend. this cooler or the Be quiet pure rock 2 FX? need help
You are better
Ninja high LEVEL) GOOD VIDEO)
Can we change the fan to an RGB fan of different brand?
If you are a cooling fan with a standard 120mm 25T standard, you can replace it with the one you want.
Is the ak400 good enough for a ryzen 5900x or 5950x?
thx for this info. i was wondering if having 2 fans on this cooler will significantly cool the cpu, its seems like theres not much of a difference from 1 fan.
If one cooling fan provides sufficient heatsink cooling, an additional cooling fan does not seem to have a significant additional cooling effect.
can you do a build with this cooler in the nr200
Unfortunately, for the nr200p, the height of the maximum compatible cooler is exceeded, so it is not possible to install the ak500.
Does the CPU frame really work or its just marketing trick?
I bought and used it in the early days of CPU banding issues. There was a slight difference in temperature depending on whether it was installed or not, and now I use it because it is easy to wipe off the thermal paste.
good video thank you.
Would it still clear the ram if it was reversed. Reason for asking is because I will have the rear fan as intake instead of exhaust.
If it's a motherboard that supports typical 4-slot memory, I don't think it'll be a problem except for slot 1.
Add another fan and upload another video....want to see the difference
Привет,для игр этот кулер и процессор хорош будет и перегрева не будет ? Думаю купить такой.
Cpu수율이 상당히 좋은가봐요 ㄷㄷ 모드1~9 점수가 다 같네요
ia this good too on intel i7 12700k?
If you are not considering separate overclocking, I think it will be sufficient.
There are also dual tower CPU coolers that provide higher cooling performance for the price, so choosing the dual tower type would be a good choice in terms of performance.
@@DalraeMyo no i dont overclock. thanks
What do you mean by Mode 1 and Mode 9?
Undervolting preset provided by MSI. The lower the number, the stronger the undervolting is applied.
Thank You for posting the video. I am thinking of getting the new digital version or new assassin 4 version when the are sold soon. .. up oakland Calilfornia is where I am.. up
This was great, thank you so much. I only have one question: what do you mean by "mode 9", "mode 5" and "mode 1"? I'm a total newbie, sorry if it's obvious. Cheers!
[Mode] is a CPU voltage undervolt-related option supported by MSI. The lower the number, the lower the applied CPU voltage.
@@DalraeMyo thanks for the info! the motherboard i got is a Gigabyte unfortunately, and B660 chipset so i doubt i'll have that available. in any case i think the AK500 will be good enough for the 13600K still, i don't plan to run anything that stressful on it ever, so! :)
Nice vid thanks!
May i ask, ID-cooling se-207-xt slim 120mm vs Deepcool AK500? I assume AK500 is better but me on a tight budget cheers!
Unfortunately, I've never used ID-cooling se-207-xt slim, so it's hard to answer. However, in general, the dual tower type has better cooling performance.
@@DalraeMyo Thanks so much for ur reply!
200W CPU OMG, That's my total system power+monitor xD
So which one is the default TDP mode,1,2,9,10?
When I used Z690 tomahawk, the default was Mode12 due to CPU overvoltage issues. Similar to Mode 9 if normal voltage is applied.
Nice
What case is it?
This is NZXT H5 FLOW.
@@DalraeMyo but the fans are already in the case I have to buy them myself
Is this an ATX Mobo?
The motherboard in the video is a motherboard in the ATX form factor specification.
Ak500 better thn ag620?
The AK500 offers better cooling performance than a single-tower CPU cooler, but it is worse than a dual-tower CPU cooler.
@@DalraeMyo no I'm just asking ag620 worth it or ak620?
What is the standard of being better?
If you're not thinking about the design factor, the AK620 and AG620 offer much stronger cooling performance than the AK500 model.@@itachi7976
Is it compatible for h310m?
LGA1151 socket is also compatible.
Wow it's better with one fan instead of 2.
이거 생각보다 괜찮네?
ak500이냐 ak620이냐..고민이고만
ak500이 튜닝메모리 높이 간섭이 없는 비대칭 싱글타워라는 점이 메리트입니다.
튜닝 메모리 높이 간섭문제 혹은 램이 가려지는게 싫은게 아니라면 AK620이 좋습니다.
AK500 is such a weird cooler between AK400 and AK620. If you're going AK500 you might as well spend more money on AK620 or AG620.
That's right. Considering the price and performance, the AK500 seems to be an ambiguous position.
I ended up buying it because I initially wanted the ak620 but then realized it would cover my RGB ram.
@@bingbong586 How is it holding up for your CPU?
이건 수율이 좋아서 가능 보통 90도 이하 버티기 힘듬 ㅋ 언다볼팅 무쟈게 잘들어가야 저 온도 가능 고로 13700k 는 진짜 수냉 써야 ㅠㅠ
RC1800 벤치도 궁금하네요
기회가 된다면 다뤄보겠습니다!
Does it mean that the standard cooler is sufficient? I guess it would make sense to put the second one in order to reduce rpm and noise.
Maybe in anther case, in this NZXT the second fan is very close to the rear.
mach be kalat pesar
I'm not an expert, but I'm a person who's trying to build a PC and make a nice, unique build.
Change music to benny hill theme, it will pass to your test much better. 😊
And change the title of the video to "How to spent 250$ and fu ck up in 7 minutes")
Jhj