Thanks! To everyone who does not understand how to put the belt on the drum, it is easy: There is a narrow gap between the rim of the drum and the plastic frame of the front. If you push the drum to left or right, the gap will expand a litthe bit, and the belt can put through at this side. It is easyer to put through the belt from inside to out. Then you have to roll the drum and continually adjust the belt until it is fully arount the drum. (It will go through the castor-wheels easily.)
I have just gone through this procedure and I would say that it was not exactly easy. But it was manageable. The tricky part was to catch the belt once part of it was pushed from the inside of the drum through the gap. We did it on the top though instead of the side.
Good thing I went through the comments, because this was exactly what I wanted to know. I've just done it by using a tie wrap around the belt, and pushing the end of the tie wrap through the space between the drum and the plastic/rubber edge. Works fine that way. Getting the belt around the motor ws much more difficult actually, mine's a different model. But thanks for sharing!
What is the part number for the belt? We have ordered 2 now and there seems to be far too much slack, even after tensioning the pulley with the spring.
![[UA] NAVI vs MOUZ | BO5 | IEM Rio 2024](http://i.ytimg.com/vi/CMBYk0cbGoA/mqdefault.jpg)
Thanks!
To everyone who does not understand how to put the belt on the drum, it is easy:
There is a narrow gap between the rim of the drum and the plastic frame of the front.
If you push the drum to left or right, the gap will expand a litthe bit, and the belt can put through at this side. It is easyer to put through the belt from inside to out.
Then you have to roll the drum and continually adjust the belt until it is fully arount the drum. (It will go through the castor-wheels easily.)
Thank you, it is a shame he didn't filmed that, as it is what everybody needs to know at the first place....
I have just gone through this procedure and I would say that it was not exactly easy. But it was manageable. The tricky part was to catch the belt once part of it was pushed from the inside of the drum through the gap. We did it on the top though instead of the side.
Good thing I went through the comments, because this was exactly what I wanted to know. I've just done it by using a tie wrap around the belt, and pushing the end of the tie wrap through the space between the drum and the plastic/rubber edge. Works fine that way. Getting the belt around the motor ws much more difficult actually, mine's a different model. But thanks for sharing!
That's why I came to this video, that's the trick part ❤ please do a video or recommend one please
Literally missing the most important part of the video
Indeed! Not helpfull at all
My belt was intact but had slipped off somehow, so this video was really helpful for me. Thank you!
1 picture can tell more than a thousant words.. Why not show us how you put the belt around the drum.
His goal to show that it's difficult, " better to call him to do it " waste of time ! He didn't show à sh.....it😮,
The most important part you didnt show, how to place the belt around the dumble 😢
How do you tension the belt? It’s so loose!
Hopeless. How did you thread the belt around the drum?
Why not show how you actually got the front off to get the belt over the drum?…
Same guestion
You deserve a price for this video.... Just not a positive one.
Doesn’t actually show how you put the belt on....pointless!
What is the part number for the belt? We have ordered 2 now and there seems to be far too much slack, even after tensioning the pulley with the spring.
Drive Belt 1971 7PH
Music: Airport Louge By Kevin Macleod
What a pointless video. How did you get the belt in the machine?
Oh Man I need to do this ... How Complicated is this to do ??? looks OK but a Bit fiddly ... anyone got the part # i need ???
👍👍👍
Thankyou
This is not good. Show everything you do man….
Completely useless. It does not show how to place the belt around the drum.
That's the easiest part. I slipped it between the drum and the door
@@vrijemezabave but how did you do that ?????
I agree with comment, how on earth did you get it inside?
Useles…
This tutorial is useless due to not being shown how to slip the belt inside!
so that's the easiest part.
it slides along the drum
@@vrijemezabave really? You make a video in which you show unscrewing screws but the belt you say is too easy to show in the video. oh man....???
ASMR instructional video.
What a Stupid Idea.
Cant see anything …