Great video, I'd replaced the door switch but couldn't find the reset instructions anywhere online to clear the error code, your instruction worked and my machine is back up and running
👍THANKS!!!! 💪💥💥🖤🛠 This also worked on a Bosch Classixx 6 VarioPerfect WAB28266SN/01 that was stuck in E21 error code after replacing the brushes. Tried calling the customer support @BOSCH here in Norway(speaking with a grumpy Swedish person) but he would NOT give me any reset or test procedure,... only interested to book me a service appointment 💰💸😖 😞. Feel free to add my machine model in the video description if you want, so other people might find this video when searching for how to reset error code on my type of machine too :-) POWER TO THE PEOPLE! - Fight for the right to-> own - repair (and reset) purchased products!!!!🛠🛠🛠 😀 . Again. Thanks for posting this video. It saved me!!! 🙂🛠 🛠🛠💰💸
brilliant thanks. I searched everywhere for the reset code for this model but came to this by chance on the third day of looking. Maybe somehow this could also be described as a reset code, not just a test mode. I think a lot more people may find it. Thanks again.
Tim can you help me with my washer dryer. Problem was it would not agitate replaced carbon brush S it worked went through wash cycle ok went through drain cycle ok went into spin raved up but befor going into high speed cut off and went back in spin no error codes any ideas
I changed my worn down brushes (2cm in length) on my bosch after it gave me the E43 error. Tried various tutorials, & im unable to reset it or get it in test mode. WM beeps 3 times with E43 error. PLEASE HELP> MODEL> WAQ243D0GB/09 Been 2 months so far.
DId have the error code E16, changed the lock switch but couldnt only find this procedure everywhere : turn the right scroll wheel at6 then press spin then 7 o clock then off blabla didn't work. Your one seems ok !
My machine is 28161, but the error code is E16. I followed your instructions, and found something different. Yours is 88 88, mine is 18 88. And when it seems done, it stops at 18 88 again, and never moved. Could you please help me with that? The mistake I made is overloaded.
Great video, I'd replaced the door switch but couldn't find the reset instructions anywhere online to clear the error code, your instruction worked and my machine is back up and running
you had the E16 code?
Great post! Had the E21 error and replaced the brusches. Reset did not work but your video did 😀. Many thanks!
Thanks so much for this. You’ve just saved me having to buy a new machine!
Thanks, that worked really well. Replacing the brushes was easy compared to finding a way to reset the error message.
👍THANKS!!!! 💪💥💥🖤🛠
This also worked on a Bosch Classixx 6 VarioPerfect WAB28266SN/01 that was stuck in E21 error code after replacing the brushes.
Tried calling the customer support @BOSCH here in Norway(speaking with a grumpy Swedish person) but he would NOT give me any reset or test procedure,... only interested to book me a service appointment 💰💸😖 😞.
Feel free to add my machine model in the video description if you want, so other people might find this video when searching for how to reset error code on my type of machine too :-) POWER TO THE PEOPLE! - Fight for the right to-> own - repair (and reset) purchased products!!!!🛠🛠🛠 😀 .
Again. Thanks for posting this video. It saved me!!! 🙂🛠
🛠🛠💰💸
Çamaşır makinesi çıldırdı
You are awesome. Bosh tech support could not or would not tell me how to do this. I'm stuck on a small island and this resolved my issue.
Thanks
HI Tim,
Thanks for this!!
After 2 years I searched for the same issue and I got this video again and that help to run the test mode. Thanks :-)
what a star been looking for this for around 3 days worked 1st time thanks
brilliant thanks. I searched everywhere for the reset code for this model but came to this by chance on the third day of looking. Maybe somehow this could also be described as a reset code, not just a test mode. I think a lot more people may find it. Thanks again.
which error code did you have? with this it was resetting the error code?
You sir are a legend! Liked and Subscribed!
Thanks a lot, was really helpful!
You have made a very good job with this video!
thank you very much for this video ,it solved my problem too .
This video saved me on a service call the other week, I meant to comment. Thanks :D
:D
Thanks a lot for this great video
Good, you're testing!
OMG, I love you!!!! Every other instructions were wrong, only your is perfect
Perfect explaining
👍 dziękuję bardzo super film uratowałeś 100 $ :)
Tim can you help me with my washer dryer. Problem was it would not agitate replaced carbon brush S it worked went through wash cycle ok went through drain cycle ok went into spin raved up but befor going into high speed cut off and went back in spin no error codes any ideas
you have talked about the error code, but is there a position for the dial it has to be in to check the memory for errors?
🎉1000 rpm
1200 rpm
1400 rpm
Hi Tim I have a Bosch top loading washing machine Avantixx 6. Standard procedure's reset doesn't work, do you know the right one for me?
Sorry no do not see many toploaders u could try some of the other test modes on some of my other videos
@@user-tim100 I will try thank you!
I changed my worn down brushes (2cm in length) on my bosch after it gave me the E43 error. Tried various tutorials, & im unable to reset it or get it in test mode. WM beeps 3 times with E43 error. PLEASE HELP> MODEL> WAQ243D0GB/09 Been 2 months so far.
thanks, you saved me
Bosch bloke turned up today and I had to show him this video to get it in test mode! You honestly are a legend!
Good
DId have the error code E16, changed the lock switch but couldnt only find this procedure everywhere : turn the right scroll wheel at6 then press spin then 7 o clock then off blabla didn't work. Your one seems ok !
How to reset E17 to this machine?
Think e17 is anti flood switch
👍👍👍
My machine is 28161, but the error code is E16. I followed your instructions, and found something different. Yours is 88 88, mine is 18 88. And when it seems done, it stops at 18 88 again, and never moved. Could you please help me with that? The mistake I made is overloaded.
As far as I know e16 is that the door is open if not would need to see it yo fault find it
How do i do it at wat24480tr?
Sorry not sure might be the same as one of my other videos
Send us your paypal account ! seemns to be working !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
👍🏼👍🏼👍🏼👍🏼👍🏼❤️❤️❤️❤️❤️❤️
Ariel
Tide
Masina bos la fel ca asta, de ce nu stoarce bine hainele ramane cu apa multumesc
1200
Busch washing machine arror cod E63
1000
Bad motorbearing
The original fault on this machine was the toc in the motor had failed