Hi all; Can I replace 100nf 275V capacitor in power supply circuit with 100nf 250V Capacitor or 100nf 400V capacitor and what is the effect of this replacement on circuit operation. thanks for all
Check how they wire the circuit and the circuit diagram. There are mistakes. The battery charger should have current limiting resistors inline with the LEDs. Also they are marked incorrectly. The speed controller shunts the power to earth to control the speed. The resistor will get hot and may even burn out. The lamp controller shows the 1M resistor connected from pin 3 to pin 1. They actually wire it as pin 3 to pin 2. BE AWARE THERE ARE MISTAKES.
You're preaching to the choir man....sadly. Mains voltage for beginners..... the worst thing about these videos from India and Pakistan is the fact they consider mains a newb project. It's even worse than the air wiring (which they do quite neatly but hardly a compliment). Coupled with mains hahah I've often wondered how many people have just been found dead from watching some of these videos. I'd bet my life that it's happened more than once and auto-play hid the author of the needless tragedy. Some of the best creators are from there. Eewave is great, but the mains bs man. I also wish they'd buy better irons, some with millions of views and they have shit gear. Some didn't get the memo that the engineering dept at the university of Kowloon no longer exists as the shotty adherence to safety reminds me of the documentarys I've seen on the city. Lol I have an isolation transformer and differential probes for when I mess with hv. Also a ul certified meter.
@@ALEFILES how are the trade tariffs there compared to Brazil? I'm east coast canada and met a guy from Chile buying a guitar a few weeks ago because they get hammered with import fees like Brazil. It was a somewhat crappy guitar too considering the brand but apparently it costed over double if he ordered it online. He's happy with it though so that's all that counts.
@@jstro-hobbytech Fortunately the trade tariffs are descending, the same like the burocracy, the last year, when you wanted to import something, the tax fee was up to 50% of the stuff cost, plus the shipping and handling, that it should be with tracking code, to avoid "missings"...greetibgs from Argentina...
If you're new do not try his 'beginner' circuits. They'll kill you if your hand slips. These videos should get a strike for showing people how to kill themselves.
Hi all;
Can I replace 100nf 275V capacitor in power supply circuit with 100nf 250V Capacitor or 100nf 400V capacitor and what is the effect of this replacement on circuit operation. thanks for all
❤
Check how they wire the circuit and the circuit diagram. There are mistakes. The battery charger should have current limiting resistors inline with the LEDs. Also they are marked incorrectly. The speed controller shunts the power to earth to control the speed. The resistor will get hot and may even burn out. The lamp controller shows the 1M resistor connected from pin 3 to pin 1. They actually wire it as pin 3 to pin 2. BE AWARE THERE ARE MISTAKES.
You're preaching to the choir man....sadly.
Mains voltage for beginners..... the worst thing about these videos from India and Pakistan is the fact they consider mains a newb project. It's even worse than the air wiring (which they do quite neatly but hardly a compliment). Coupled with mains hahah
I've often wondered how many people have just been found dead from watching some of these videos. I'd bet my life that it's happened more than once and auto-play hid the author of the needless tragedy.
Some of the best creators are from there. Eewave is great, but the mains bs man.
I also wish they'd buy better irons, some with millions of views and they have shit gear.
Some didn't get the memo that the engineering dept at the university of Kowloon no longer exists as the shotty adherence to safety reminds me of the documentarys I've seen on the city. Lol
I have an isolation transformer and differential probes for when I mess with hv. Also a ul certified meter.
Plus the fucking music. My cats could walk on my piano and it would be more artistic.
Thanks a lot for the advisory. Because this guy uploaded circuits with mistakes, he don't deserves my like...
Greetings from Argentina!
@@ALEFILES how are the trade tariffs there compared to Brazil? I'm east coast canada and met a guy from Chile buying a guitar a few weeks ago because they get hammered with import fees like Brazil. It was a somewhat crappy guitar too considering the brand but apparently it costed over double if he ordered it online. He's happy with it though so that's all that counts.
@@jstro-hobbytech Fortunately the trade tariffs are descending, the same like the burocracy, the last year, when you wanted to import something, the tax fee was up to 50% of the stuff cost, plus the shipping and handling, that it should be with tracking code, to avoid "missings"...greetibgs from Argentina...
What is dc voltage and current?
WHAT are you building?? It makes no sense to me if I don’t know what you are trying to show me..?? Please write what it is..
Thank you so much
good
thanks, a list of components would be good, or is there a good starter kit. I have some stuff from a raspi kit, but not a lot of the stuff you used.
If you're new do not try his 'beginner' circuits. They'll kill you if your hand slips. These videos should get a strike for showing people how to kill themselves.
Plus the fucking music.
👍
Sir, how can I email you? Thanks in avance...