@Citizen , I don't know whether you were aware of this. You filmed this video with such picturesque blue skies. Just capturing these blue skies with the clouds alone made this video enjoyable.
@@rayrussell6258how long did it take you to type out that response to my question? Cause I bet you could’ve cut your response time in half, if you decided to grow up and be an adult before you sent that message. Congrats for being a dick bro! I bet your momma sure is proud! 👏🏻
I just got mine yesterday. I can't get off of it. PSA: It's a HUGE bike, videos and pics simply cannot capture its actual size. No complaints personally, I'm 6'5 and even installed a 2 inch stem riser, I feel like a kid on it! If you're on the fence, just pull the trigger and get this thing.
Oh man that's incredible!🤯 Patiently waiting for the parts list! I have a '24 Wired Cruiser and a lot of time on my hands which is definitely a dangerous combination for me😅! I also have a '24 Freedom but was run off the road 2 weeks ago by a distracted driver, so I now have up to 12 months of recovery to dream up ideas for my Cruiser! My Freedom unfortunately sustained some damage in the accident which is why I now have the Cruiser. Keeping a positive attitude though! I'm determined to get out there and ride again by summer! 💪 This is just a bump in the road! Pun intended! Love your videos brother!
48 degrees here this week, last week it was barely 32 degrees; just not warm enough yet. But while the weather warms up, I'm going on the hunt for a Wired Freedom!
You can use just 1 pas, 1 display and 1 throttle for two controllers and two motors. With one battery inline, you just need to connect on throttle both sensor wires on a 3way switch before throttle connection ,and connect both negs together to make 1, use 1 power wire for direct 5v to throttle. With Display : connect 1 power wire from controller to display, and both negs to display, match both uart in and out wires to each controller(IE: example both blue from both controllers twisted together to the one blue on display ) . And then do thru display reprogramming the setting to the way you like, be sure to have the display reset to factory settings before setting up. I have a few videos of one I built this way with a 1000w rear direct drive hub and a 1500w front direct drive hub, using 2 40A 48-72v controllers and 1 throttle w/regen ,and 1 sw900 display . No pas was available with the controllers i used.
Is it my imagination or is your filming becoming much better? Your videos are very enjoyable to watch, see the public wants to see more than just the bikes, we want to see the scenery and the sky and all that, and this video provides it keep up the good work I’ve been riding with you since the beginning.
Oh man ," U R The Man" I have been contenplating doing this because my top speed after 9 months has leveled off to around 33 - 36 mph . Hopefully you'll get at least 5 or 6 mph faster and if so I'll be doing the same . I was considering doing a shunt mod but was not wanting to mess with the controller in case it overheated . Always look forward to your experments Dr. Cycle
I'm targeting acceleration and hillclimb power, not top end speed. But having dual motors will take stress off the rear motor possibly allowing you to go a few miles an hour faster.
Hi CC... Can I suggest or you put it into a vote with all your viewer about upgrading an ebike with the super bike front and the side panels half way across the bike. I would like to see that. I want to learn fiber glass & do it myself & 3000w each wheel 72v controller system but funding problems stopping me. I hope you do as I & many will love to see if it can be done
We need a mid-drive single throttle add-on plug and play kit for the 60v dual battery 2025 Wired Freedom. 😎🤘 And then a plug and play front hub for triple crown freedom!
Could this be E-Cells answer to the Wired Freedom? The E-Cells Five Star. Nylon/steel hybrid gears, 60V 40 amp controller, 1200W motor, 20Ah battery, DNM air shock (rear), Kenda Krusade fat tire, 56 tooth chain ring, high rise BMX style handlebars, cruise control, etc, etc, etc. Free shipping, free front basket. Didn't reckon it would take too long for the competition to notice, let the price wars begin!
Dude PAS 5 and run on the peddles it's an easy 40+ mph bike. Throttle only doesn't give full power. You'll notice when you're in PAS 5 and peddling doing 40 if you apply the throttle it actually slows you down.
Early comment lol. My Organe titan WIRED FREEDOM 2024 arrives tomorrow. Man i havent even gotten my hands on mine and your already making me want to go faster. Might be an overtime project. Would be cool to keep improving on it ourselves.
@CitizenCycle925 IT IS CONFIRMED THE BIKE JUST ARRIVED. Honestly minimal damage to the box. Ordered it January 8th, delivered today? February 5th so about a month for those who are wondering about how much time it takes. I'll give further updates as I go
My orange Wired Freedom just arrived as well! Also minimal box shipping damage, so I'm glad I elected to not pay the shipping insurance. As the UPS guy wheeled the box to my garage, he mentioned that I would enjoy my new TV! I had to explain to him that it was an ebike, and the TV picture on the box was to encourage fragile handling of the box. He then mentioned that the box seemed very heavy (120 lbs) for a TV 😄 I guess the picture on the box does seem to work.
Please please please Brian ...... do a comparison with Aventon Aventure 2, when you get this Wired Freedom ready. With performance, before and after shown. You convinced me to get the Aventon, glad I did. But you might have me looking to expand the "fleet" now.
You just gave away Wired Freedom's secret weapon to keep their bike selling for the next year. Wired Freedom is already building a dual motor Freedom to keep up with the competition. Let's wait and see......
Can you set up the front controller to gradually feed in the power? Maybe starting at 400 watts off the line, getting to max at 10 mph, or whatever your testing shows to be more usable?
I have a few questions about my 2024 freedom Your thoughts on the rear gear set its different from the 2023 also the Kenda Tires they Have a Max presure 30 psi last year's tires are 20 psi and seem like they are softer compound. also my wired had 4.9 miles on speedo out of the box everthing was freshly packaged do you see this with your new purchased bikes Lee
Hi Citizen Cycle Dude, I want to buy one but another video of the rear shock configuration shows it to be very underbuilt. What are your thoughts on this? I'm kinda thinking this reviewer knows what their talking about in case you haven't seen it. Wired Freedom defects. I definitely don't want a sloppy ebike. Thanks so much if you have the time to respond. Mark in Madison, WI.
Is there a reason why you couldn't splice into the original throttle and display wires and eliminate the need for two of everything? Possibly even use the front/rear/dual switch from something like the grizzly?
Yes you can certainly connect everything together however The drawback is you are messing up all your bikes original wiring. Plus having both Motors connected to one throttle I find way more dangerous, the front motor can kick in when you're not expecting it. I've ridden many all-wheel drive bikes And that is certainly their downfall, unexpected front wheel engagement.
Thanks for the vid , I have been looking into these bikes , would love to get a little more speed without spending a fortune or making it unreliable. I like that they don’t draw to much attention as a moped style e bike would .
I live in Canada. Anyone know if customs will give me trouble crossing into Canada with one purchased in the states since they currently are not available in Canada?
I bought a dual motor e-bike that is just fine, and it only has one display. It can be switched from front wheel drive only, or rear wheel drive only, or dual motor drive. There's no need to go through all that modification on a Wired Freedom and have two displays that look just playing silly.
It’s time to connect everything together with one throttle and one pedal assist and one display with a switch to be able to run one motor or both motors !!
I hope this turns out to be a good battle between You and MaximumCharge to see who's bike goes faster, farther... etc. You're cockpit is looking alot cleaner and nicer compared to his though 🤣
I have the Fabulous EMX, extreme 60 V 20 inch dual motor E bike and I love the power. I’ve always liked the freedom bike but I contacted them and they will not ship it to Canada.😩
Can't wait to see it all finished so I can compare your 0 to 30 to mine I have the fastest wired freedom on UA-cam right now you should check out my build. Love your videos it what inspired me to build my freedom
The range is atrocious tho. This bike is a UNIT! I recieved mine 2 weeks ago and I would only do a shunts mod. I'm not tryna add more significant weight to this bike. It's pretty much faster than most other ebikes on the market. Don't tell your local bike shop this bike goes over 28mph otherwise they will not touch it.
Citizens cycles builds are always by far the cleanest and most stock looking maximum charge is billed. Looks like a science project. It’s got shit hanging everywhere. It looks terrible.
I'm still amazed Brian's channel hasn't grown more. He has by far the best e-bike content as far as I'm concerned.
by far!!!!
@Citizen , I don't know whether you were aware of this. You filmed this video with such picturesque blue skies. Just capturing these blue skies with the clouds alone made this video enjoyable.
Yes, I did notice. The skies were absolutely beautiful that day. 😄
Looks great! Looking forward to seeing your finished product.
Man what a sweet build! Love how gou keep it clean too! Keep getting it brother!
Looking forward to the parts list. Plus I'm jealous you have the weather to even ride that beast lol.
Working on it! and yes, NC weather is pretty good all year :)
I live in SC and I want a wired freedom so bad i can taste it. lmao.
@@CitizenCycle925what part of NC if you don’t mind me asking?
@@lennygarrison6836 view the video again, he rode past the city limit sign 😉
@@rayrussell6258how long did it take you to type out that response to my question? Cause I bet you could’ve cut your response time in half, if you decided to grow up and be an adult before you sent that message. Congrats for being a dick bro! I bet your momma sure is proud! 👏🏻
Drooling on table watching this and then crying when he said two weeks until info on parts list ;P
I'm hurrying! Chinese new year slowed things down, factories shut down.
I just got mine yesterday. I can't get off of it. PSA: It's a HUGE bike, videos and pics simply cannot capture its actual size. No complaints personally, I'm 6'5 and even installed a 2 inch stem riser, I feel like a kid on it! If you're on the fence, just pull the trigger and get this thing.
Glad you love it and yes it is large and in charge, pics online don't do it justice.
I was riding my freedom today and was actually considering doing exactly this.
Oh man that's incredible!🤯
Patiently waiting for the parts list!
I have a '24 Wired Cruiser and a lot of time on my hands which is definitely a dangerous combination for me😅!
I also have a '24 Freedom but was run off the road 2 weeks ago by a distracted driver, so I now have up to 12 months of recovery to dream up ideas for my Cruiser!
My Freedom unfortunately sustained some damage in the accident which is why I now have the Cruiser. Keeping a positive attitude though! I'm determined to get out there and ride again by summer! 💪 This is just a bump in the road! Pun intended!
Love your videos brother!
Wishing you a speedy recovery! Stay positive.
Stay strong brother!
Fantastic! Can't wait for the parts list ... and the instruction video! Super fun and thank you!!
Awesome build. Loved the video.
Man am I ever looking forward to Spring and hopping back on the E Bike!
Just around the corner!
You said it ! I'm dying to get back on mine!
48 degrees here this week, last week it was barely 32 degrees; just not warm enough yet.
But while the weather warms up, I'm going on the hunt for a Wired Freedom!
Wow I was thinking of getting Wired Freedom but now WOW this is 2 wheel drive so cool.
You can use just 1 pas, 1 display and 1 throttle for two controllers and two motors.
With one battery inline, you just need to connect on throttle both sensor wires on a 3way switch before throttle connection ,and connect both negs together to make 1, use 1 power wire for direct 5v to throttle.
With Display : connect 1 power wire from controller to display, and both negs to display, match both uart in and out wires to each controller(IE: example both blue from both controllers twisted together to the one blue on display ) . And then do thru display reprogramming the setting to the way you like, be sure to have the display reset to factory settings before setting up.
I have a few videos of one I built this way with a 1000w rear direct drive hub and a 1500w front direct drive hub, using 2 40A 48-72v controllers and 1 throttle w/regen ,and 1 sw900 display . No pas was available with the controllers i used.
Going up hill on my ecell super monarch awd. I have to literally stand up and pedal, and it's a beast to pedal.
You have to pedal up hill? That thing should climb hills throttle only with ease...
Great bike ride Dr. Frankenstein.
Yep as a motorcycle rider I am just getting one of these to explore places I wouldn’t take a motorcycle
Exactly
I know I'm only a few minutes into the video... BUT I'm loving the bars and stem.
Is it my imagination or is your filming becoming much better? Your videos are very enjoyable to watch, see the public wants to see more than just the bikes, we want to see the scenery and the sky and all that, and this video provides it keep up the good work I’ve been riding with you since the beginning.
Thank you very much for that comment. I try my best to put out more than just bike reviews, and add some fun!
“but if you’re like me…”. Awesome.
Finally. Getting mine tomorrow. Good lord what a wait. I need the front motor sir... are we ready yet?
Darn was cut off here again, yes i want this!
With great power comes great responsibility. 😉❤
Yes it does!
I would buy as soon as it's available.
...teased!
Oh man ," U R The Man" I have been contenplating doing this because my top speed after 9 months has leveled off to around 33 - 36 mph . Hopefully you'll get at least 5 or 6 mph faster and if so I'll be doing the same . I was considering doing a shunt mod but was not wanting to mess with the controller in case it overheated . Always look forward to your experments Dr. Cycle
I'm targeting acceleration and hillclimb power, not top end speed. But having dual motors will take stress off the rear motor possibly allowing you to go a few miles an hour faster.
@CitizenCycle925 Those are my preferences too. Tons of torque 😅
Awesome lol, 2:56 evil laugh on point
Hi CC...
Can I suggest or you put it into a vote with all your viewer about upgrading an ebike with the super bike front and the side panels half way across the bike.
I would like to see that.
I want to learn fiber glass & do it myself & 3000w each wheel 72v controller system but funding problems stopping me.
I hope you do as I & many will love to see if it can be done
🏆
We need a mid-drive single throttle add-on plug and play kit for the 60v dual battery 2025 Wired Freedom. 😎🤘 And then a plug and play front hub for triple crown freedom!
woah bro!!! Sick Pickles!!! wow!!
Could this be E-Cells answer to the Wired Freedom? The E-Cells Five Star. Nylon/steel hybrid gears, 60V 40 amp controller, 1200W motor, 20Ah battery, DNM air shock (rear), Kenda Krusade fat tire, 56 tooth chain ring, high rise BMX style handlebars, cruise control, etc, etc, etc. Free shipping, free front basket. Didn't reckon it would take too long for the competition to notice, let the price wars begin!
Cool build, is this all off the original battery?
Dude PAS 5 and run on the peddles it's an easy 40+ mph bike. Throttle only doesn't give full power. You'll notice when you're in PAS 5 and peddling doing 40 if you apply the throttle it actually slows you down.
I heard if you use the brake it slows down too
Early comment lol. My Organe titan WIRED FREEDOM 2024 arrives tomorrow. Man i havent even gotten my hands on mine and your already making me want to go faster. Might be an overtime project. Would be cool to keep improving on it ourselves.
It has good power out of the box, you're going to have fun!
My orange Wired Freedom arrives tomorrow as well. Hoping for no shipping damage.
@CitizenCycle925 IT IS CONFIRMED THE BIKE JUST ARRIVED. Honestly minimal damage to the box. Ordered it January 8th, delivered today? February 5th so about a month for those who are wondering about how much time it takes. I'll give further updates as I go
My orange Wired Freedom just arrived as well! Also minimal box shipping damage, so I'm glad I elected to not pay the shipping insurance. As the UPS guy wheeled the box to my garage, he mentioned that I would enjoy my new TV! I had to explain to him that it was an ebike, and the TV picture on the box was to encourage fragile handling of the box. He then mentioned that the box seemed very heavy (120 lbs) for a TV 😄 I guess the picture on the box does seem to work.
@@SamArentz enjoy!!
Please please please Brian ...... do a comparison with Aventon Aventure 2, when you get this Wired Freedom ready. With performance, before and after shown.
You convinced me to get the Aventon, glad I did. But you might have me looking to expand the "fleet" now.
Actually i was thinking of also making my Aventure 2 a dual motor bike using the same parts....
You just gave away Wired Freedom's secret weapon to keep their bike selling for the next year. Wired Freedom is already building a dual motor Freedom to keep up with the competition. Let's wait and see......
Are you sure that Wired is planning to make a duel motor version?
Oh man looks like I’m spending money very soon here
Haha sorry to make you open your wallet😂
Thanks for sharing
You bet!
If memory serves me right, the new Freedom is about a second faster up the hill than your Varla Eagle One Scooter!
Your memory is better than mine then!
Can you set up the front controller to gradually feed in the power? Maybe starting at 400 watts off the line, getting to max at 10 mph, or whatever your testing shows to be more usable?
He's a speed freak.....he will not do that😅
Nor would I
Very Nice! Good Job!
Thanks!
I have a few questions about my 2024 freedom Your thoughts on the rear gear set its different from the 2023 also the Kenda Tires they Have a Max presure 30 psi last year's tires are 20 psi and seem like they are softer compound. also my wired had 4.9 miles on speedo out of the box everthing was freshly packaged do you see this with your new purchased bikes
Lee
Whenever you’re ready can you show us step by step tutorial on how we can upgrade our freedom… parts and components and everything else… thanx
Soon... got more parts today!!
Hi Citizen Cycle Dude, I want to buy one but another video of the rear shock configuration shows it to be very underbuilt. What are your thoughts on this? I'm kinda thinking this reviewer knows what their talking about in case you haven't seen it. Wired Freedom defects. I definitely don't want a sloppy ebike. Thanks so much if you have the time to respond. Mark in Madison, WI.
Ha ha. Looks like a candidate for a brand new customized Citizen Cycle. Enjoy.
Nice vid! Did you have the dual motor set up independent like the citizen bike? Can't wait for the complete set up and links!
Yes completely seperate system for front motor
Not Bad. I have single motor slightly modded RadRover doing 3.9s 0-30mph and 41 mph currently...Upgrading soon even further 😉
MERICAAAA❤
Is there a reason why you couldn't splice into the original throttle and display wires and eliminate the need for two of everything? Possibly even use the front/rear/dual switch from something like the grizzly?
Yes you can certainly connect everything together however The drawback is you are messing up all your bikes original wiring. Plus having both Motors connected to one throttle I find way more dangerous, the front motor can kick in when you're not expecting it. I've ridden many all-wheel drive bikes And that is certainly their downfall, unexpected front wheel engagement.
Thanks for the vid , I have been looking into these bikes , would love to get a little more speed without spending a fortune or making it unreliable. I like that they don’t draw to much attention as a moped style e bike would .
Great job! Great video editing!
Hello,
Enjoy your channel. Can you tell me the rim width on the freedom, I want to research a more narrow tire possibly.
Thank you.
83.2 mm
like watching Top Gun Maverick trying to get to mach 10 😎. well, not quite but it looks like you were having a lot of fun
yes, better acceleration always makes me smile!
Wheelie bars on the front forks!?
YOU'VE GONE MAD WITH POWA!!!!
an increase in acceleration makes ebikes much more fun.
You pretty much have an AR Grizzly now
I live in Canada. Anyone know if customs will give me trouble crossing into Canada with one purchased in the states since they currently are not available in Canada?
I bought a dual motor e-bike that is just fine, and it only has one display. It can be switched from front wheel drive only, or rear wheel drive only, or dual motor drive. There's no need to go through all that modification on a Wired Freedom and have two displays that look just playing silly.
So what, just the old dual+mid drive motor/controller setup? Seen that. What's the new difference?
Does anyone know where I can get the exact same Controller
40ah 60v KT that the freedom has maybe the link as well thanks
It’s time to connect everything together with one throttle and one pedal assist and one display with a switch to be able to run one motor or both motors !!
Nah much better this way. Safer
@@CitizenCycle925 I disagree!!
Well a non geared front hub 3,000 nominal watt 60V and 40 amp controller should do higher speed perhaps.
Nice
I have a freesky 35 mph.
Have you seen Jason silver's videos? AKA racing Jason! He has a modified freedom!You should check out his UA-cam channel!
The acceleration looks good with the single motor..I hate how this bike looks tho. Looks like a large bmx bike
Can you put a mid drive motor on wired freedom?
How did you get the second Wired Freedom display? Or was that a special deal for you?
The duel motor rad power bike that I have cruses 41mph on the front wheel only on pedal assist 4.
I'm differently interested let me know
What bike would do you recommend?
You GOTTA LOVE IT!
Citizen, in your mind is there this concept called, "street legal'?
Thank you for doing this and I will wait patiently for the parts list. I have a 2023 Freedom will the parts work on a 2023
Yes it will
@@CitizenCycle925 thank you
Good as tailhappytv
Do you think it’s worth getting rid of the Candace for a torque sensor?
If you want more of a pedaling workout then you could switch to torque sensor but otherwise i would leave the cadance.
Will the kit work on all bikes? Or do you need certain forks on the front to make it work?
Need the rst guide forks
@@CitizenCycle925 thanks.
@@CitizenCycle925 you wouldn’t happen to have a list of bikes already equipped with rst guide fork?
@@CitizenCycle925 hey would you be able to test out the conversion kit on a beecool bike?
@@singlestringstruggler1988 Unfortunately, I don't have a bee cool bike to try on.
Would you say the stock wired frwedom is better than the fab road warrior? If you had to choose, which one would yiu pick?
Wired is just as powerful, easier to drive and is cheaper
This mod just makes it accelerate faster correct, it doesn’t make the top speed higher does it?
More acceleration and hill climb power, not top end speed.
@@CitizenCycle925 cool.. have you seen the ecell five star? It’s essentially the same bike but I can’t find any reviews for it
Seen one the dude couldn't keep the thing from wheelies.
My doctor told me to give up riding my bike due to my herniated discs and weak pelvic. 😢 I gotta trade it in for an electric scooter.
Maybe get a suspension seatpost and cushier seat
I hope this turns out to be a good battle between You and MaximumCharge to see who's bike goes faster, farther... etc. You're cockpit is looking alot cleaner and nicer compared to his though 🤣
I am focused on gaining acceleration and hill climb power. Havent seen his bike, guess I need to check it out. 😊
I'd do this if they added anything to the top speed.
I want one
I want to make mine AWD and I haven't even got it,yet.
@luigiprovencher haha love the excitement! maybe get used to the power first then make it all-wheel drive
@@CitizenCycle925 Yeah there's a lot of hills and the winters can get bad here.
No parts list yet ?? cmon : )
I want to add a front hub motor to my current e-bike
If you have a fat tire bike , then the parts i'm using should work for yours too.
I wonder if you could change any of the gearing to get higher top end?
They’re hub motors..the gearing is all internal. If you wanna deal with gearings you need a mid drive
@@slimdunkin117 I am not talking about the electric motor gearing, I was thinking more in the line of sprocket size!
Ray why don’t you buy this one for me? 😂
Legend.
I have the Fabulous EMX, extreme 60 V 20 inch dual motor E bike and I love the power. I’ve always liked the freedom bike but I contacted them and they will not ship it to Canada.😩
Yep wired only ships to USA. That EMX bike is cool though
Can't wait to see it all finished so I can compare your 0 to 30 to mine I have the fastest wired freedom on UA-cam right now you should check out my build. Love your videos it what inspired me to build my freedom
The range is atrocious tho. This bike is a UNIT! I recieved mine 2 weeks ago and I would only do a shunts mod. I'm not tryna add more significant weight to this bike. It's pretty much faster than most other ebikes on the market. Don't tell your local bike shop this bike goes over 28mph otherwise they will not touch it.
Your gonna need a Rack Battery for AWD. 😮
I have a 2nd battery in the rear bag 😀
@@CitizenCycle925 Oh ! 👍
Your having to much fun. Lol😊
Always!
Why not a well ballanced direct drive motor? Wouldn't that increase top end?
Not a big fan of direct drive motors, not as much torque, they're heavy and ugly. I'm targeting acceleration and hillclimb power not top end speed.
GIMME
You’re a little late to this upgrade because the channel Maximum Charge showed off his dual motor wired freedom 2 weeks ago
Yes, I got slowed up with the fine tuning of this project. But there's a reason for that 😉
Citizens cycles builds are always by far the cleanest and most stock looking maximum charge is billed. Looks like a science project. It’s got shit hanging everywhere. It looks terrible.
@CitizenCycle925 could you show the upgraded brakes please?
@@TheTcat1000I'm not done with mine yet 😢😢😢
@@maximumchargeEVI spoke of the devil and he showed up 😂
Is there any way to make that bike just have one screen and one throttle?