Casio CTK 811ex Floppy drive emulator

Поділитися
Вставка
  • Опубліковано 12 вер 2024

КОМЕНТАРІ • 37

  • @AngelLund
    @AngelLund 5 років тому +2

    nice video :D glad to see you getting into youtube :D
    P.S First :D

    • @rstorebo
      @rstorebo  5 років тому

      Thank you for your comment, glad you liked it!

  • @MercurialTorpor
    @MercurialTorpor 4 роки тому +1

    Hi Ricky, thanks for the informative video and music. I too had a problem installing an emulator on the Casio CTK 811 whereby it did not recognise it. I assumed it was an incompatible floppy emulator. Which type did you use? Source? Any help would be greatly appreciated.

    • @rstorebo
      @rstorebo  4 роки тому +2

      Hi there and thanks for your comment! I used a plain floppy emulator off of ebay I believe it is called. I found a link to a generic one that I got: www.ebay.com/itm/3-5-1000-Floppy-Disk-Drive-to-USB-Emulator-Simulation-For-Musical-Keyboad/362945878378?hash=item548142996a:g:7QcAAOSw13hebxdk
      Hope this helps you out, let me know how it turns out in the end!

    • @MercurialTorpor
      @MercurialTorpor 4 роки тому +1

      @@rstorebo Thanks Ricky, I did find the and install the correct emulator and set the jumpers correctly for a successful installation. The emulator number is SFR1M44-U100K and the jumpers need to be set for S1 and J5. J5 is the tricky one because it is not mentioned in the user manual but apparently selects for 1.44MB capacity disk. Cheers, Greg

    • @dorioedsonpandolfi9060
      @dorioedsonpandolfi9060 2 роки тому

      @@MercurialTorpor I did this procedure on mine but it didn't work, it shows no disk error

    • @MercurialTorpor
      @MercurialTorpor 2 роки тому

      @@dorioedsonpandolfi9060 All you can do is check that you have the SFR1M44-U100K ribbon cable, power connector and jumpers installed correctly and that you have the ribbon cable in the correct orientation. The RED stripe should be at PIN 1 of the USB emulator. If all that is correct and you have a USB stick plugged into it, the emulator may be faulty. Plug your original floppy drive back in to make sure all is good with the CASIO as a last check before returning the emulator.

    • @dorioedsonpandolfi9060
      @dorioedsonpandolfi9060 2 роки тому

      @@MercurialTorpor I checked here, mine was inverted, but now it's showing format error, it's jumping on s1 and j5.

  • @vazolt
    @vazolt 10 місяців тому +1

    Hi. What is the correct jumper settings on the emulator for the casio ctk 811-ex?

    • @rstorebo
      @rstorebo  9 місяців тому

      I did this a long time ago now so I unfortunately do not remember, sorry :(

  • @AirfixKS
    @AirfixKS 3 роки тому +1

    3:03 this is maybe song from Wham ?

    • @rstorebo
      @rstorebo  3 роки тому +1

      You know to be honest I can't tell you for sure if it is. These midi files are from an old collection and I no longer have the list of info for each song sadly.

  • @EvLoutonian
    @EvLoutonian 2 роки тому +1

    Do you have info on what was the original floppy drive model, by any chance?

    • @rstorebo
      @rstorebo  2 роки тому

      Oh wow it's been a while not sure if I even have the old floppy drive anymore, if I find it I will definitely let you know!

  • @andressamourao623
    @andressamourao623 3 роки тому

    Olá ,sou do Brasil !
    Amigo você poderia me informar para que serve o disquete normal que vem no teclado?! Pois o meu é igual o ctk 811ex mas não tem o disquete

  • @kaziifaizan
    @kaziifaizan 4 роки тому +1

    How much is this keyboard in market..

    • @rstorebo
      @rstorebo  4 роки тому

      That is a very good question indeed. I did a search on ebay for it but could not find the keyboard itself just dust covers and power supply replacements, your best bet if you are interested in buying one would probably be to check local second hand shops or possibly local used markets in your community, such as Facebook marketplace or the equivalent in your area. I remember buying mine for about 650 dollars but that is many years ago, probably around 15 years. Sorry I couldn't be of more help, but good luck! :) Have a great day and thanks for your comment!

  • @nodwas1
    @nodwas1 4 роки тому

    i have ctl-811ex and a getec usb emulator . it will not format disk. how do i go about setting this up .any advice would be great.

  • @eljipu8632
    @eljipu8632 4 роки тому +1

    ricky i have the same keyboard and i bought a floppy emulator too, but when i try to load or save a tone the screen show ''err format''

    • @rstorebo
      @rstorebo  4 роки тому

      Yeah the USB stick has to be partitioned with a special program in order for it to work properly with the floppy emulator and keyboard. Did the floppy emulator come with some kind of software to partition the USB stick?

    • @eljipu8632
      @eljipu8632 4 роки тому

      @@rstorebo no but i found a software, the problem was in the bridges that have to do in the floppy emulator, the bridges where in S1 and J5

    • @FarhodV-l6l
      @FarhodV-l6l 4 роки тому +1

      El Jipu And how did you solve these problems ? Please could you write more details?

  • @goktan051
    @goktan051 4 роки тому

    Merhaba. Bende gotek floppy var. Ancak error uyarısı yapıyor. Kırmızı lamba yanıyor. İpcas ile disk oluşturuyorum. Ancak err hatası alıyorum. Jumper nasıl yapılacak daha açıklayıcı bilgi alabilir miyim? Teşekkürler..

  • @alfredodossantos2240
    @alfredodossantos2240 2 роки тому

    Amigo o meu levou uma queda nao liga mais a placa que liga queimou

  • @jakubdudamusic
    @jakubdudamusic 4 роки тому +1

    is it possible to record sound samples and send to email?

    • @rstorebo
      @rstorebo  3 роки тому

      I apologize for my very late reply. Convert a midi file? to mp3 you mean? Could this possibly be something that could help you? audio.online-convert.com/convert/midi-to-mp3

  • @pulpo.mix.paranormal.4030
    @pulpo.mix.paranormal.4030 4 роки тому

    hello good afternoon, sorry that it bothers you, but I'm looking for it, buy a usb emulator for my casio ctk-811ex piano, with its configuration cd, but it does not have the instructions to configure it in casio, only in yamaha, and look at your tutorial where you show that if it works in a casio, could you enlighten me how to configure it in a casio ctk-811ex, and finally there is some rhythm commander for the casio format (smf) I thank you for your attention and thank you.

  • @alfredodossantos2240
    @alfredodossantos2240 2 роки тому

    Da para me ajudar fornecendo a placa

  • @jakubdudamusic
    @jakubdudamusic 4 роки тому +1

    could you convert a midi for me? I would send an email, I care a lot

    • @rstorebo
      @rstorebo  3 роки тому

      I apologize for my very late reply. Convert a midi file? to mp3 you mean? Could this possibly be something that could help you? audio.online-convert.com/convert/midi-to-mp3

  • @tedysamsi8488
    @tedysamsi8488 3 роки тому

    jumper positions pic

  • @user-eu2yf1el6s
    @user-eu2yf1el6s 5 років тому +1

    Disket i USB ye nasıl dönüştürdünüz. Harika olmuş. Aynı org bende var bende yapmak istiyorum yardım edin lütfen

    • @rstorebo
      @rstorebo  5 років тому

      Here is the emulator I used: www.ebay.com/itm/3-5-Black-Floppy-Disk-Drive-MFM-To-USB-Emulator-Simulation-For-Musical-Keyboad/392325065813?epid=3003437161&hash=item5b58656c55:g:TNoAAOSwEf5b3XRu

    • @rstorebo
      @rstorebo  5 років тому

      It requires you taking the keyboard apart, be very careful since a lot of cables are soldered without any sockets. Good luck and thanks for watching my video! :)

    • @user-eu2yf1el6s
      @user-eu2yf1el6s 5 років тому +1

      @@rstorebo ilginiz için ben çok teşekkür ederim. Saygılar sunarım.

    • @rstorebo
      @rstorebo  5 років тому

      @@user-eu2yf1el6s Anytime, let me know if there is something more I can do to help :)

  • @pikachuconesitoanimation2428
    @pikachuconesitoanimation2428 3 роки тому

    Hola Tengo El Disquete Saluda Chileno