Homemade Low RPM Generator
Вставка
- Опубліковано 26 лип 2023
- I made this powerful electric generator from scratch using cheap ferrite magnets, iron cores were cut out of sheet iron, 18 coils 40 turns each hand winded around the cores i made from those iron pieces..
it Generates 12 Volts 8 Amps AC at 120 RPM, this alternator i need to connect it to some thing like a wind turbine or steam engine or a pedal to generate electricity when the power is out.
u can charge 12 Volts Lead acid battery and use a buck converter and a usb port to charge smart phones with it, charge your flashlight or even use a iron core transformer to make 220/110 volts AC and charge your laptop or turn on your computer or a electric fan. - Наука та технологія
👽Thanks for watching!
I built this over 8 years period & gathered the parts as i saw them over this long time, from scratch. more videos on it later..💡
Homemade generator, thank you for sharing. I need to improve it further to achieve higher efficiency
3:30 The red LED doesn't need as much energy as the blue one with the short wavelength, so maybe if you put a resistor with a red one in the circuit, it might prevent it from burning.
red led has a lower operating voltage 2 v compared to blues 3 v so it burns at a lower voltage, the resistor prevents that.
Excellent job...that's good...congratulations..:!!!
The steel sheet used as a core are very thick..the eddy current will be so high
Nice info, thanks :)
More videos about homemade generators and robots please upload video early as possible you can
Cool !
Sick video ❤
Is giving a lot of power
It will be much better if you used magnetic levitation
next video. homemade nuclear fusor. :)
Damn! not that fast, i need more equipment for that..
@@aufoslab yeah most expensive thing is the vaccum pump. altho u can use from old fridge
I vote you bro, waiting for nuke.
Que lindo generador y si asi se debe bobinar de verdad no como otro video bobinando todo cruzado no es eficiente asi de esta manera si que buen trabajo bro Arg
thanks!
For the robots right :)
yeah!
بالنسبة لفة السلك كم لفه لكي يصير ملف ..أستفسار من فضلك اريد
it's 40 turns each
This ist not low rpm
voltage is too low
what voltage is good?