Mandalorian Inspired Neopixel Lightsaber by NSABERS

Поділитися
Вставка
  • Опубліковано 16 чер 2024
  • This is the way! Check out this stylized emitter from NSABERS!
    PRODUCT LINKS
    Neopxel version:
    nsabers.com/products/mandalor...
    Base-lit version:
    nsabers.com/products/mandalor...
    Discount code for 7% off:
    PRIYONJONI
    CAMERA/AUDIO/LIGHTING used to produce this video:
    Zoom H8 multitrack portable recorder (dialog) www.zzounds.com/a--3970758/it...
    Samson Q9U broadcast microphone www.zzounds.com/a--3970758/it...
    Sony ZV-1 Vlogger Camera (front) amzn.to/32jLc9l
    Sony HandyCam FDR-AX100 (overhead) amzn.to/3rEiWXN
    MOVO LP4 omni-directional lav microphone amzn.to/3HGsXuM
    Weelyte RGB wifi camera light (backlight) amzn.to/3Fwn8yd
    NEEWER 660 LED panel pair amzn.to/3nzcyAq
    NEEWER softbox diffuser amzn.to/3DyyHEI
    K&F camera stand amzn.to/3DBCwc2
    DISCLOSURE
    At the time of this video being posted, I am not affiliated with SaberForms. No instructions were given to create this review. The saber was gifted at the agreement that I would create a fully honest review. This video is posted without prior feedback from SaberForms.
    HASHTAGS
    #NSABERS #MANDALORIAN #THISISTHEWAY
    CHAPTERS
    0:00 Intro
    0:24 Unboxing
    2:08 The Hilt
    5:20 The Blade
    6:50 Let's turn it on!
    15:00 Let's spin!
  • Наука та технологія

КОМЕНТАРІ • 56

  • @priyonjoni
    @priyonjoni  Рік тому

    Subscribe to my new channel UA-cam.com/@lightsaberculture
    Neopxel version: nsabers.com/products/mandalorian?ref=wd22rbw0&variant=42878236786905
    Base-lit version: nsabers.com/products/mandalorian?ref=priyonjoni
    Discount code for 7% off: PRIYONJONI

  • @tc3969
    @tc3969 10 місяців тому +10

    Good video, but let me give you some advice. Don't tighten retention screws in opposing positions. Retention screws work by pushing the blade against the opposing wall of the emitter, increasing the amount of friction between the blade and hilt over a larger surface area. By tightening retention screws in opposing positions your blade only comes into contact with the two small screws, making it less secure.
    For those of you who may want to know exactly what soundboard this lightsaber is carrying, it uses an SN-Pixel V4 soundboard made by TXQ.

  • @SqlEdits
    @SqlEdits 7 місяців тому +4

    I'm considering buying this for Christmas, really excited

  • @Thelastdon85
    @Thelastdon85 Рік тому +15

    Just ordered mine can’t wait

    • @cameronharrington354
      @cameronharrington354 Рік тому +1

      ordered mine today how is it?

    • @natpagler4263
      @natpagler4263 Рік тому +1

      How long did it take for it to deliver once you ordered it?

    • @sxint_07
      @sxint_07 11 місяців тому

      @@natpagler4263Like 5 days but it depends where you live i believe

    • @LuisSoto-lt2hf
      @LuisSoto-lt2hf 7 місяців тому

      Did you ever get it?

  • @nerdydaydreams
    @nerdydaydreams 4 місяці тому +1

    wait I love that you ended up testing it out in the snow at the end!! ☃

    • @priyonjoni
      @priyonjoni  4 місяці тому +1

      Doing it in the snow is awesome, everything glows!

  • @cameronwiebe4670
    @cameronwiebe4670 8 місяців тому

    Thanks for the review. Can you turn off the voice indicator? (The voice when you cycle though settings)

  • @toniman3420
    @toniman3420 11 місяців тому

    Tnx for the vid , the manual was nonsense to me so this video helped

  • @patman2356
    @patman2356 Місяць тому

    Great video, I'm debating picking up 2 but I'm unsure how well they'll survive in combat
    I don't mean full on bashing the blades together, but it'd survive playful taps surely

  • @adamben-shimon7513
    @adamben-shimon7513 11 місяців тому

    Great video, thanks!

  • @stevegarner3077
    @stevegarner3077 4 місяці тому

    I'm interested in N Sabers Senza lightsaber. I just want to know if they are durable when dueling.

  • @ricrush1200
    @ricrush1200 Рік тому

    Dope! 🔥🔥🔥🔥🔥🔥🔥

  • @yodawurst-zl7oe
    @yodawurst-zl7oe 11 місяців тому

    thank you very much that the code worked so well thank you thank you😊

  • @jackdoesstuff3111
    @jackdoesstuff3111 Рік тому

    only a few months til i get alightsaber, can wait but dont wanna im so excited

  • @michaelalmodovar4332
    @michaelalmodovar4332 9 місяців тому +1

    How does it stand up to doling?

  • @rafster1882
    @rafster1882 2 місяці тому

    I have the Luke rotj neopixel saber. When I turn the saber off how do I then fully power it off?

  • @monsterfishLT
    @monsterfishLT 11 місяців тому +1

    Such a cool saber! I have been considering buying one myself just not the mandolorian one, so I want to know. Does all sabers have the same options? Like does they have the same sounds, ignitions, colour and brightness?

    • @priyonjoni
      @priyonjoni  11 місяців тому

      Pretty much each electronics board option has its own set of sound fonts and blade styles. All the Proffie are identical on each saber. All the Neopixel/XenoPixel are identical and so on.

    • @monsterfishLT
      @monsterfishLT 11 місяців тому

      @@priyonjoni ok, thank you! 😄

  • @Cenogen328
    @Cenogen328 6 днів тому

    I don't have ignition styles I have different sound fonts. How do I change my ignition styles???? And for holding it down three times it plays music

  • @rodericklane7921
    @rodericklane7921 Рік тому

    Dope!

  • @alienfootballers5554
    @alienfootballers5554 2 місяці тому +1

    Is it durable

  • @michaelalmodovar4332
    @michaelalmodovar4332 8 місяців тому +2

    So I’m on their website and it says that they have different size blades. You can order extra blades at 32 or 36 inch. But when ordering the saber it does not seem to give you any options for what size blade you want?

    • @nsabers
      @nsabers 7 місяців тому +2

      You can make a note in the order form

  • @nerdydaydreams
    @nerdydaydreams 3 місяці тому

    not me watching this for the fourth time to learn how to talk about lightsabers from the best of the best!! 😊

    • @priyonjoni
      @priyonjoni  3 місяці тому +1

      You got this! Just talk about what makes you excited about it.

  • @yodawurst-zl7oe
    @yodawurst-zl7oe 11 місяців тому

    grate video

  • @marcusgraves1070
    @marcusgraves1070 Рік тому +2

    hey I was wondering I'm thinking of buying a djm s7 how do I go about checking the authenticity of just to see if it's fake?

    • @priyonjoni
      @priyonjoni  Рік тому +9

      You must take it and have it bathe in the living waters of Mandalor. This is the way.

  • @huiba1
    @huiba1 7 місяців тому

    Two questions; first, does it include a sith lightsaber sound mode without speaking? And second, is the red really red? Because it looks almost orange on camera

    • @priyonjoni
      @priyonjoni  7 місяців тому +1

      1. Not sure what you’re asking. Could you reiterate?
      2. All pure red looks slightly orange on camera. What you see on film is artificially added.

    • @huiba1
      @huiba1 7 місяців тому

      @@priyonjoni 1. Well the lightsabers in the movies have two sound effects, one for normal sabers and a slightly deeper sound for red sabers (like Vader's). I am wondering if it has the red saber sound effect without a voiceline added. 2. Ah okay, thank you for explaining!

  • @lincolnstalkchannel7110
    @lincolnstalkchannel7110 Місяць тому

    Is this RGB or not ?

  • @EmmaEastridge
    @EmmaEastridge 8 місяців тому +1

    How long did it take for it to ship?

    • @nsabers
      @nsabers 7 місяців тому

      It takes 2-3 weeks.

  • @Nomad_theElder
    @Nomad_theElder 5 місяців тому

    Can u duel with it and does any led blade fit in this handel

    • @priyonjoni
      @priyonjoni  5 місяців тому

      The blade is fuel ready, and any standard neopixel blade with a 1” diameter (most common) will fit.

  • @Greatestgamingclips
    @Greatestgamingclips 4 місяці тому

    My family didnt open the door for the courier so now i have to wait more time for mine 💀

  • @user-ro5ey5ps4b
    @user-ro5ey5ps4b 4 місяці тому

    My blade is not as bright as your blade. What is different?

    • @priyonjoni
      @priyonjoni  4 місяці тому

      It's darker where I'm at.

  • @indi_ediz
    @indi_ediz 9 місяців тому

    What of a soundboard is it like verso or cfx

    • @priyonjoni
      @priyonjoni  9 місяців тому

      SN Pixel

    • @indi_ediz
      @indi_ediz 9 місяців тому

      @@priyonjoni do u mean just sn pixel ör whats the ful name

    • @indi_ediz
      @indi_ediz 9 місяців тому

      @@priyonjoni what kinda fonts can i downloaf lıke cfx xenopixel proffie or verso lıke wich is the one ı can download it to my lightsaber

    • @priyonjoni
      @priyonjoni  9 місяців тому

      SN Pixel is TXQ's equivalent of XenoPixel. Here is some info on it: neosabers.com/sn-pixel-v4-lightsaber-manual/

  • @alessandroghirlanda5436
    @alessandroghirlanda5436 Рік тому +1

    Can you turn the volume off?

  • @jacksonrejda421
    @jacksonrejda421 Рік тому +1

    honestly is the sound good or like meh.?

  • @Nelly870
    @Nelly870 10 місяців тому

    Just got mine but can’t figure out what the „blade plug“ is for? Can u explain that please? I‘m really struggling 🥲

    • @priyonjoni
      @priyonjoni  10 місяців тому +1

      when you're using the hilt without a blade, the blade plug is a protective cover over the neopixel connector. It's completly optional if you want to use it or not.