@@ReefDudes I’m so happy (sobs quietly with joy). It’s freaking quiet bruh, I cannot hear it in the laundry room. My guest will sleep better, they hang on what ends up being the guest closet other side of the wall. Now, I can finally use my DOS 1.0 for dosing instead of ATO. I have a small house, I could hear the 1.0 across it with ease. I wonder if I’m now going to wake up thinking something is wrong,, I’ll miss the reminders that the ATO is functioning. Maybe that’s a use for the reef factory Apex lights I got while drinking.
What would have been nice if they would have made it upgradable for the existing ones that you have just a new head slide in would have been fantastic.
Really hoping to see Neptune drop a DOS x DOS where it is 4 heads in a more compact form. I just might replace my Versas if they came out with that. Fusion is hands down better than Mobius.
There is lots of space in side, you could always cram it into a smaller housing.. I'm not sure if that air space around it is for cooling or just to fit the design.
It’s nothing but garbage junk. I got mine yesterday. The pumps were not screwed in so I said let me screw them in only to find out that the casing for the whole unit somehow, they’ve made it where you cannot tighten the screws and the doors and pump works the motors are exactly what they were before so no motors have been replaced with any quiet motor, what they’ve done is change the circuit board to slow the motor down. It’s not screaming loud that high RPMs it’s a total rip off. Everyone knew from the get-go that the moment the company was sold. We were gonna suffer the consequences of those actions I have videos I have photos of the motors with the seat with the parts number it’s just shocking to see to the level that this company has slipped too. It’s all about money. The qualit of the dosing pump is horrible. Do better you guys need to do much better and stop ripping off the consumers. I’m gonna post these videos all over the Internet because people need to know what you’ve done. It’s a horrible thing not only me don’t take it for me. only look in the Internet you’ll see the amount of people having problems with it, when I type the screws, the motor would even turn. I built a lot of custom tons of people and in all my years I have never seen such garbage a manufacturer put out to scam people money again how many increases last year with their products don’t buy this product
The original DOS uses a stepper motor, so the noise varies based on how many ML you dose, turn it up the 9,000ML like mine and you’ll understand why they made the QD. Very very loud.
Yeah, I’m very excited about this one. I do ATO with DOS and they are loud as heck, I have to turn them off when guests stay in the next room over.
lol, sounds like this will be a worthy upgrade in your scenario!
@@ReefDudes I’m so happy (sobs quietly with joy). It’s freaking quiet bruh, I cannot hear it in the laundry room. My guest will sleep better, they hang on what ends up being the guest closet other side of the wall. Now, I can finally use my DOS 1.0 for dosing instead of ATO. I have a small house, I could hear the 1.0 across it with ease. I wonder if I’m now going to wake up thinking something is wrong,, I’ll miss the reminders that the ATO is functioning. Maybe that’s a use for the reef factory Apex lights I got while drinking.
Day #2,, my house is so freaking quiet! It’s glorious!
I need a link for those push connect adapters 😎👌🏾
I too would like to know where to get those.
Heck yes, only way to go. bulkreefsupply.sjv.io/dospush
bulkreefsupply.sjv.io/dospush
Is it still the same maximum gallons/day limit for AWC compared to old DOS?
I believe it’s similar. Paul said on the stream the other week but I don’t recall. I’ll let you know if I dig up the specs
What would have been nice if they would have made it upgradable for the existing ones that you have just a new head slide in would have been fantastic.
i believe the heads are the same, the big changes would be in the driver board it self and how it controls the motors
Man wish I could have heard it running the AWC.
i may do a shorts video of it at different rates when i get a chance :)
I’m ready for an upgrade… take my money please! 😂
hahahah no time to waste :P
Link to the rodi adaptors?
bulkreefsupply.sjv.io/dospush
Disregard, see the link now. TY
Really hoping to see Neptune drop a DOS x DOS where it is 4 heads in a more compact form. I just might replace my Versas if they came out with that. Fusion is hands down better than Mobius.
There is lots of space in side, you could always cram it into a smaller housing.. I'm not sure if that air space around it is for cooling or just to fit the design.
It’s nothing but garbage junk. I got mine yesterday. The pumps were not screwed in so I said let me screw them in only to find out that the casing for the whole unit somehow, they’ve made it where you cannot tighten the screws and the doors and pump works the motors are exactly what they were before so no motors have been replaced with any quiet motor, what they’ve done is change the circuit board to slow the motor down. It’s not screaming loud that high RPMs it’s a total rip off. Everyone knew from the get-go that the moment the company was sold. We were gonna suffer the consequences of those actions I have videos I have photos of the motors with the seat with the parts number it’s just shocking to see to the level that this company has slipped too. It’s all about money. The qualit of the dosing pump is horrible. Do better you guys need to do much better and stop ripping off the consumers. I’m gonna post these videos all over the Internet because people need to know what you’ve done. It’s a horrible thing not only me don’t take it for me. only look in the Internet you’ll see the amount of people having problems with it, when I type the screws, the motor would even turn. I built a lot of custom tons of people and in all my years I have never seen such garbage a manufacturer put out to scam people money again how many increases last year with their products don’t buy this product
Thanks for the review, considering the new QD for AWC. Could you please share a link to the connectors used to connect the RO tubing to the QD?
it works great for that! these are the ones i use on all of my DOS's bulkreefsupply.sjv.io/XY0RY4
What size thread do you need for the ro tubing adapter?
Happy with the audible change. Just wish they added a way to do a manual dose from fusion
Agreed, i asked about it on my last stream with paul and sounds like its on the future list
Just glorified Versas….no innovation at Aperture
Improvements to an existing product. All welcome improvements if you’re rocking that ecosystem.
If you have Versas and use a MXM module, isn’t that basically the same thing? Or are these supposed to be quieter than the Versas?
My two are very quiet and I’ve had them since they came out, I have had no issues
Beautiful! Mine was fine for dosing but loud for everything else.
The original DOS uses a stepper motor, so the noise varies based on how many ML you dose, turn it up the 9,000ML like mine and you’ll understand why they made the QD. Very very loud.
So no video on noise-level when doing AWC???? 😕
going to vary depending on the speed/volume /duration Maybe ill do some clips later with a bunch of difference speeds
If you have time that would be helpful. Original DOS are mostly-ok for dosing small quantities. Its for AWC that they get insanely loud.
When are they for sale
Wouldn't pay a dollar for them
I would think any day now.. should be pretty quick
That's the beauty of a free market!
@@ReefDudesworth every penny sir. Working flawlessly as ATO on 300gallon and I hear nothing where bf I could across the (small) house.