HOW TO OPERATE A GENIE / JLG BOOM LIFT - GEARHEADZ
Вставка
- Опубліковано 9 сер 2020
- Learn how to operate a boom lift!
This video is designed to help our customers understand the safe operation of a Genie or JLG Boom Lift. The lift in this video is a Genie S-60 (60' boom lift), and the controls are almost identical in the JLG version.
Operating a boom lift requires training and certification. Please consult the manufacturer's manual and undergo proper training. However, here are some general steps to operate a boom lift:
Pre-Operation Inspection:
- Check for visible damage, leaks, or loose parts.
- Ensure all safety devices and controls are functional.
- Verify that the lift's maintenance is up to date.
Personal Protective Equipment (PPE):
- Wear appropriate PPE, including a hard hat, safety harness, and high-visibility vest.
Load Capacity:
- Determine the weight and capacity of the boom lift, and ensure you don't exceed it.
Setup:
- Park the lift on a level surface.
- Engage the outriggers (if equipped) for stability.
- Verify the surface can support the weight of the lift and the load.
Power On:
- Turn the key to the on position (choose ground control or basket control) and release the red safety stop button
- Hold the engine start toggle switch to one side and allow the engine to crank up
Boom Control:
- Familiarize yourself with the control panel and the different functions
- Raise and extend the boom from the ground control to the desired height and position using the right-side joystick
Safe Entry:
- Enter the platform using the designated access point.
- Ensure the gate or door is securely closed and latched.
Operation:
- Use the controls to maneuver the boom lift.
- Move slowly and steadily, avoiding sudden movements.
- Communicate with a spotter on the ground for guidance
Safety Measures:
- Keep your entire body inside the platform at all times.
- Do not lean or reach too far outside the platform.
- Be aware of overhead obstacles and power lines.
- Follow all safety protocols and guidelines
Shutdown:
- Lower the boom and platform to the ground.
- Power off the lift according to the manufacturer's instructions.
Exit Safely:
- Exit the platform through the designated access point.
- Ensure the gate or door is securely closed and latched.
Post-Operation:
- Perform a post-operation inspection for any damage or issues.
- Report any problems to maintenance or your supervisor.
Remember, this is a basic outline, and specific boom lifts may have unique features and controls. Always follow the manufacturer's instructions and complete any required training and certification for safe operation.
VISIT OUR SITE: WWW.GEARHEADZUS.COM
Gearheadz Equipment is located in Pendleton, SC. We sell Reach Forklifts, Telehandlers, Boom lifts, Articulating Boom Lifts, Skid Steers, and Mini Excavators. We carry brands such as: Genie, Terex, JLG, Snorkel, Skytrak, Bobcat, John Deere, Gehl, and more. - Навчання та стиль
Needed a refresher course not infront of the boys at work. Thanks for the video brother. Much appreciated
You are very welcome! Glad it helped!
Same
Same!
Hahaha! Man I know what you mean. Try reading the LYFT Instruction Manual (4 the 1st Time) up in the Basket while the nervous boss (who rented it) is watching you on surveillance cam on the job site.
Same
3 years out, and still helping people. 👍🏻
This is professional instructor, clear and easy to explain , obviously the harness optional everybody knows, thanks !
great tutorial, quick and painless, certified in 6 minutes!
🤣
I'm an accountant but there are people next to our building using this thing and I've been wondering how it operates. Thanks for this!
Hahaha! Had a quick *De* *Ja* *Vu* of you running over to Gas Station with your 2 Gallon plastic gas can to help "bail" the workers stuck up high in their basket.
_Has this happened to me?_ _....SSsshhhh_
Great vid. Helped me refresh after a year of not using one.
Im a new bee going to start working on frac work & on manlifts , this video help me alot brother thank you , from the valley 👍
Thanks for this, brother. Been needing this to freshen up again
This is a great video I was at work one time it took 6 guys to figure out why the machine wouldn’t let us drive it’s cause the basket was on the wrong side lmao 😂
Haha! It happens to everyone... Glad you enjoyed the video!! Hopefully it saves people some time on the job
@@gearheadzequipmentsales Does that mean all 4 wheels are able to steer and turn or must you always keep the basket in the rear behind the big grey dome unit?
@@designertjp-utube only 2 of the wheels turn. You can technically drive the machine with the basket on either side.. but one way will be going backwards. So you'll have to hold down a switch which tells the machine you know you're driving it backwards.
Finally a jlg cherry picker video thank you got a job on monday need a refresher
Great refresher!!!
Thank you for this video! Getting ready for my practical test for my aerial lift permit😃
That's exactly why I'm here lol I go for mine next month. Hope you passed!
@@desramps3324 Yes I passed, thanks ✌😃
Oops! An Aerial Lift Permit? Where do I look for such a LYFT Safety Center in Los Angeles? I know it ain't the DMV.
Thx dude this was very useful
Bro
Thanks your video save my time.
This was awesome I was looking to buying one of these
Awesome! Thanks for the feedback. We also sell them!
Haulotte is better
Thank you so much I learned a lot from you and I want to drive It
Helped me out today thank u
Great help!
Thanks that helped
I gotta so some painting work tomorrow so i needed some refreshing since last time i operated this
Thanks so much for this I appreciate you
Thanks Robert. Glad you enjoyed it.
Great Video!
Well explained!
thanks Antonio! We appreciate the great feedback!
I use to paint 747, dc10s, dc9,s ... anyway airplanes in these, not unusual to spray a dc9 by myself ,driving and spraying at the same time. Would take a jgl 62 footer behind the tail of 747 up all the way and boom up all the climb the basket and start on the top of the tail. Used 80 footers to change the light bulbs in the ceiling of the hangers.
This was in the 90s. Fun to watch these videos
Superb 😊
Thank you!!
Hi sir, I past my course a few days ago, I'm a scaffolder so I'm not scared of heights but.. On the cherry picker I have to use for me job does make me abit shakey because I'm not used to the floor below me moving 😂, my question is can one of these tip if there is no weight on them apart from me if fully extended?
Great tutorial very good explaining on how to drive the only thing you forgot is to use your harness safety belt before entering the boom lift basket other than that nice well explain video tutorial
Well... Now that you mentioned it, is there a LYFT *Pee* *Bottle* I can purchase at Home Depot?
I was hoping to find out what the top left (ground controls) toggle was for. The picture looks similar to the turtle / rabbit toggle.
I feel confident to teach the lead tech toady, he seems insecure about operating this lift and is late to the job site. This video is a lifesaver
Glad to hear that! Thanks for the feedback
Thank you for the great feedback!
Excellent video. Thought I'd trim a tall tree in my backyard (large, dying limb hanging directly over my house) instead of paying tree cutting service.
Thanks! very useful
Thanks Kevin! I appreciate the positive feedback!
No problem, I just rented a Boom lift for Friday. This will be my first time operating it.
where can find this thing to put in my chevy van
Very well
Thanks u sir
Thanks bro..
Thanks God bless ❤
Isn’t there a button you have to push when it’s not level. I know it has to be in turtle mode and some override button.
The one thing you forgot to mention is to start moving step on the pedal and pull the triggers up and out 😂
My OSHA manual says inspect for rust and wear and dont use if found. O_O
I am perfect operator
Renting one of these for tree trimming. So can I lift myself up into the air and then turn the machine off once I get to where I need to be? Then I can saw off my limbs and then turn it back on to move to another spot?
Yes, certainly
I'm a little surprised that u didn't tell anyone that they should have a harness to make sure u don't get thrown out of the bucket
harnesses are important but this is an operational video. thanks for your input
I'm going on a high speed chase in one of those
Great video. Will one of these lifts drive down a somewhat steep hill? Need to trim trees which are on level ground at water's edge but to get there is about 36% grade (20 degree angle).
Hey Justin, great question. Yes they will drive on a 45 degree slope. However, to get full functionality out of the boom, you will want to be on level ground once it's time to go up in the air.
P.S. They are 4WD but i would make sure you have proper traction on the slope before driving down or up it. Any loose dirt or mud could cause a BIG problem.
No
I'm a painting contractor and I'm looking to rent one of these, how far out can it reach at least 25 ft high that it's safe?
Great question!
For the 60' lift.... you can get about 50' of horizontal reach when the basket is at 25'.
If you rent a 40' lift, you can get about 30' of horizontal reach when the basket is at 25'
Any vecancy tell me
Is there a process for proper stabilization since there are no put riggers
No, the machine has an oscillating axle that automatically stabilizes just like vehicle does off-road. And if it gets on a surface that is to steep then the machine will not allow you to use all the functions. It basically tries to keep you as safe as possible.
All my controls work from ground, but from basket only drive and boom up, down and rote works. All other controls don’t function. Boom out rotate basket.etc. What could it be?
could just be bad switches in the basket controls. Have you looked into that? If not, let me know. I could have our mechanic give you some other ideas
Can you rotate the turret from inside the basket??
yep
I lied on my resume. Thank you🙏
haha, happy to help!
Appreciate brother
I have a friend that has this equipment but he leaves his basket above the ground is that bad for the machine
Nope, that's no problem. that is how we store them as well
Just hear so I can say I had one year experience cherry picking 😂
does drive mode work when the boom is fully extended 60ft???
You can go very slow when the boom is extended but I would not recommend it
When you’re doing the aerial lift training they teach you to lower it before moving it from one spot to another, as it is the easiest way to tilt it, and if it comes down, you’re coming down with it, which can cause lots of damage to property and it can be fatal
I did my course today and two of us were up well about building height and extended and we had to drive across the car park and navigate around cones from that height/extension....I've never even been in one until today so it was a little bit nervy up there
Is there no need to use the glow plugs before starting? Do they have them on these machines? I just passed my 1a, 3a and 3b but they were all electric machines.
This boom is located in South Carolina and was filmed in the summer so I didn't use them here. We rarely need to use them, but they are on the machines if needed. Electric machines are very similar as I'm sure you know.
If you can operate electric, you would do great on these Diesels too!
I know apreting any vacancy
🙏👍
where's your harness little buster!?
I want to buy a boom lift
I would be happy to sell you one
You’re missing your harness :(
Just make sure you don't leave your cell phone in your truck for when you're up in the basket and you shut it down to work and the damn thing wont start to get you back on the ground.🤬
Just another video showing how far the machine does not go.....
If you have to watch a video to run one of these than you don't need to be on one.
For refreshers yes you should
Not ONE mention of body harness.
No mention of pre-inspection.
No mention of the dangers involved and how EASY it is to get in trouble on a boom lift.
No mention of training or safety.
I hope no one sees this video and attempts to operate a lift. Yikes!
Thanks Max. Better contact the authorities if you’re that upset