Hello Derek, Is there any way that you can set a tool change position, it means to set a position that will have the spindle go-to position to make a tool change. Please advise.
I built a machine for practice using components of an existing one. However the tool is buried in the spindle. Shift doesn't seem to do anything. Any suggestions?
Thanks Derek, big help. First time setting this up in mastercam I got through the process really well on my third try for a simple 3 axis mill. However I still can't get it to simulate anything using it. Comes up with "Can't load machine configuration files". Looks great on the screen everything moves properly. This happened the first two times I set this up as well but I kept fixing things. Last time my spindle wasn't at the table as shown so I though maybe that was the issue. But I did notice that every time I go to load my machine from a different file to try to make some changes, that it somehow converts it to metric on an inch scale so my machine with a 22x50 inch table turns into about 3 inches. Then I recreate the whole thing again(time consuming) and save it, and does it again. Is it required that I create it in metric for it to work properly? Or am I missing a button somewhere. Mastercam 2020. Thanks!
Great video. Question: where do i execute step 10 in mastercam x9? (Create a new machine 11:14min mark on video) thank you for the mastercam videos they help me tremendously. Nathan W
![[THE TLE 시공사례] 07 어퍼하우스 남산 🙏 프리미엄 드레스룸의 정석](http://i.ytimg.com/vi/7ILXK5-72WE/mqdefault.jpg)
our explanation is very good, good work.
Hey Justin, it's been a while since I worked on this. I recommend logging in to emastercam.com forum and asking the question
Hello Derek, Is there any way that you can set a tool change position, it means to set a position that will have the spindle go-to position to make a tool change. Please advise.
You’re awesome for uploading this! Thank you.
This is enough to get me to your site and register. Great stuff,,,, this is what I've been looking for!
hello. I can't create an assembly. all bindings when exporting the model to stl to only 1 place are the coordinate system. How can I fix this?
AWESOME EXPLAIN
I built a machine for practice using components of an existing one. However the tool is buried in the spindle. Shift doesn't seem to do anything. Any suggestions?
Thanks Derek, big help. First time setting this up in mastercam I got through the process really well on my third try for a simple 3 axis mill. However I still can't get it to simulate anything using it. Comes up with "Can't load machine configuration files". Looks great on the screen everything moves properly. This happened the first two times I set this up as well but I kept fixing things. Last time my spindle wasn't at the table as shown so I though maybe that was the issue.
But I did notice that every time I go to load my machine from a different file to try to make some changes, that it somehow converts it to metric on an inch scale so my machine with a 22x50 inch table turns into about 3 inches. Then I recreate the whole thing again(time consuming) and save it, and does it again. Is it required that I create it in metric for it to work properly? Or am I missing a button somewhere. Mastercam 2020.
Thanks!
There is a place for download the files for this webinar?? That'd be great!
I need virtual machining for SPDT and also surface characterization with FTS
Great video. Question: where do i execute step 10 in mastercam x9?
(Create a new machine 11:14min mark on video) thank you for the mastercam videos they help me tremendously.
Nathan W
yeah i couldn't find button create a new machine in mastercam x9 anywhere?
hay did you find were you can launch the machine development in master can...can't find it either
thx
what post does the new machine use?
Thanks
do you where i can find button create new machine anywhere in mastercam x8 or x9?
thi is a good video
Quality this video is not good. We can't see anything. Can You reupdate this video ? Thanks You So much.
I have a problem with a virtual machine
Could you plead held me ! Put the tool holde go to spindle
&