Oh man, ordering now!! My machine was given to me maybe 5 months ago, and the cold water light has never worked, but the water was always cold. Ran out of water a week ago, just filled my 5 gallon, put it in, filled a cup of cold water…except it’s not cold. Thank you so much for this video! Hope it’s the fix mine needs 🤞🏻
I have a Culligan dispenser that we purchased at Costco. A few days ago I noticed the cold water was room temperature. Once in a while I would hear a relay click but the compressor would never start. Your video was very helpful showing how to disassemble the two parts. My compressor pins are opposite yours with two on the top and one below. The parts look identical to yours so it’s worth a try like you said. Again, thank you!
Hi there mr ricardo!i haved the water dispenser.mine is not cooling but hot water works.u think we have the same issues?no blue light display on cooling indicator.& also where did u get your replacement parts?
Hey, i just opened my dispenser up and noticed my wiring is backwards on mine compared to yours ! Should i follow the same wiring when replacing the switches or go with yours? Could that be the culprit of not having cold water? On your video the red wire goes on the top switch where as mine goes on the bottom one. Any info appreciated
Take your thumb and press on the back of the clip while your index finger pulls out on the fastened end. It fought me for a few minutes but when I discovered the secret no more problem.
Thanks for replying. I actually got it off. I did everything you did. The light still hasn't turned on for the cold water but we hear the noise of the compressor. I checked my water and its coming out cold. How long did it take the blue light to turn on for you?
I just took mine apart this afternoon. Got the parts ordered and they will be here Thursday. Yesterday I put a new pressure sensor in our Instant Pot. Amazon had one for $9.95 or two for the same price. Never hurts to have the parts on hand.
Oh man, ordering now!! My machine was given to me maybe 5 months ago, and the cold water light has never worked, but the water was always cold. Ran out of water a week ago, just filled my 5 gallon, put it in, filled a cup of cold water…except it’s not cold. Thank you so much for this video! Hope it’s the fix mine needs 🤞🏻
Thank you very much!! Part ordered, installed and now working perfectly! Truly appreciate you
Very easy install too
THANK YOU for such a detailed video and dropping the link to order this part in your description.
I have a Culligan dispenser that we purchased at Costco. A few days ago I noticed the cold water was room temperature. Once in a while I would hear a relay click but the compressor would never start. Your video was very helpful showing how to disassemble the two parts. My compressor pins are opposite yours with two on the top and one below. The parts look identical to yours so it’s worth a try like you said. Again, thank you!
I appreciate the time you took to comment, I hope it works out for you.
Thanks for your time!
How long passed after you changed the relax for it to cool off again?
Great video! I’m going to give it a try. 👍🏻
Thanks for watching, good luck.
Great
Mine stop working and no light showing is it the same problem or something else?
Thanks
Hi there mr ricardo!i haved the water dispenser.mine is not cooling but hot water works.u think we have the same issues?no blue light display on cooling indicator.& also where did u get your replacement parts?
He has the part linked in the video description
So was the water cold 🥶
Cool… mine is not getting the water cold as well. I don’t hear the compressor turning on so hopefully this helps…
Good luck, I also hope it works for you. Take it easy.
i just dig into my back panel & open the retaining plastic cover.my relay is toasted.does this means my compressor is broken?
Where can I buy the lid?
Thanks for this video. Hope it helps me too
Thank you sir
Hey, i just opened my dispenser up and noticed my wiring is backwards on mine compared to yours ! Should i follow the same wiring when replacing the switches or go with yours? Could that be the culprit of not having cold water? On your video the red wire goes on the top switch where as mine goes on the bottom one. Any info appreciated
Hello, to be honest, I always keep everything the same as it came from the manufacturer. Sorry that I could not be more helpful. Take care.
Great video
I appreciate your reply, take it easy.
Thanks for the help!!!
Hope it works out for you. Thanks for the comment . Take it easy.
Thanks a lot
Is it still working?
Yes, thanks for asking.
Could you post the parts links to buy them.
QP2-4.7 PTC Starter Relay 1 Pin... a.co/d/41fMuvD
How do I get the clip off?
Take your thumb and press on the back of the clip while your index finger pulls out on the fastened end. It fought me for a few minutes but when I discovered the secret no more problem.
Thanks for replying. I actually got it off. I did everything you did. The light still hasn't turned on for the cold water but we hear the noise of the compressor. I checked my water and its coming out cold. How long did it take the blue light to turn on for you?
I just took mine apart this afternoon. Got the parts ordered and they will be here Thursday. Yesterday I put a new pressure sensor in our Instant Pot. Amazon had one for $9.95 or two for the same price. Never hurts to have the parts on hand.