Don't expect flawless no razor cuts on at least some parts of the clear coat in difficult areas if your going to go cheap and not pay for body removal. That's why they have to remove some of the parts for removal so they can tuck without cutting/heating close to the clearcoat. And if you want absolutely no razor near the paint, expect compromised work......theirs a saying , you get what u pay for....as per your wrap.
Great informative video thanks! Just not clear why the nose had rock chips with the clear bra on the front end? I understand the nose damage from another car but that doesent explain the smaller chips with the clear bra?
Will a wrap make my paint blister on my Corvette? They say it needs to breath. I had one Corvette blister due to being covered with a cover that didn't breath.
I had my whole '16 Z06 wrapped in SunTek PPF. No cutting on the car. The only parts removed were the rear tail light bezels. Very easy to remove. The rear Corvette script was also removed and a new one reinstalled. The job was done with complete love and care. On top of the film CQUARTZ Finest was applied. $5500 for the total installation. See my channel for a video of it post installation.
Blabbing.....OMG...get to the point. Terrible Public Speaking..... and he’s not even in public just with his camera and seems nervous. Oh well at least he tried. He will get better with time
Huge fender gap in rear wheels. Never noticed how large it was before. They need to bring that wayyyy down. Obviously not via lowering the car. It's already low enough. They need to rework the panels and wheel wells to bring it much closer to the wheel. My '16 M3 rear fenders look like they're sitting on the tires, and that's 100% stock suspension setup. Thinking about a CTS-V in 2019. I just can't do pure 2-seaters. Can't even lay back if you want to, lol. Wrap looks damn nice though. I would wrap, but I already have XPel Ultimate on most of the car, so that would mean pulling of $5k worth of PPF, the wrapping, then putting XPel back on, because I'd want the wrap protected. Well... next car I guess. Too late for me on this one.
GM has a policy that all their cars will be able to have snow chains easily applied and be driven with snow chains in winter conditions and this is the reason you have such a large gap there.
Absolutely NOT 4K for what you had done … AT ALL … it’s not Chrome or textured like carbon fiber … BS … AND NO PANELS TAKEN OFF!!!! Nah man nahhhhh … Your friend either BS’d you or you have no clue at all what you’re talking about
Being able to convey your ideas in shortest amount of words is a measure of intelligence.
Thats true 1/2 the time.
lol wise guy
"Make sure its warrantied" is all you need to know
What about washing your car. Do you have to hand wash it only? Or can you go through a car wash?
Don't expect flawless no razor cuts on at least some parts of the clear coat in difficult areas if your going to go cheap and not pay for body removal. That's why they have to remove some of the parts for removal so they can tuck without cutting/heating close to the clearcoat. And if you want absolutely no razor near the paint, expect compromised work......theirs a saying , you get what u pay for....as per your wrap.
What’s the vinyl call, or the color of this vinyl
Thanks for the vid. I plan to wrap my e46 m3 this summer. My fear now is pieces not being put back together properly.
What color 3M wrap, please? I have seen it asked several times and not seen the owner’s answer.
It was called battleship grey!
Thanks bro I don't need a wrap until the price drop
So they wrapped the door without removing the mirror?
What color is that?
Doesn't explain how maintenance wise is. I wanna know how you take car of it etc.
Wait so can you wash your car after wrapping it?
What color wrap is that?
Hey D’juan it was gun metal gray by 3M
Color shifting matte wrap. Fuckin love it!!
what color wrap is this? Satin black? looks like some carbon fiber wrap on the sides too if I'm not mistaken.
Edwin Mezua It's matte metallic charcoal gray (it's the 3M version, Avery also makes one)!
Thanks for the info
Great video! Please make a come back! ☺️🙏
Great informative video thanks! Just not clear why the nose had rock chips with the clear bra on the front end?
I understand the nose damage from another car but that doesent explain the smaller chips with the clear bra?
It amazes me how so many of you can't get to the point and are so redundant! Instead of 12 minutes this should have been a 7 minute vid top!
Will a wrap make my paint blister on my Corvette? They say it needs to breath. I had one Corvette blister due to being covered with a cover that didn't breath.
Rob Ormiston Car blistered due to some previous cheap paint job.
I like the color of your wrap. I see more guys going with it.
Nice Video !
What color and brand of wrap you have ???
Is this a satin dark grey?
3 to 4 K ??? Yikes, I like my paint more and more now !
Man I’m saying
thank you
What do you call this color wrap? It's nice
What color is this!? I love it
Awesome very imformitive! I have been looking to get a wrap done, very helpful! New to the channel! I hit the red button and the bell!
This is how I feel I sound when I have cotton mouth.
Is this 3M Satin Dark Black wrap?
Matte dark grey
Good video. Thanks for posting
How did they wrap under the wing without removing the bumper?? I'm asking because I'm going to wrap my Z06 soon
Nice looking Car.
Omg.... I couldnt even get past 2 mins,
But gnome color I'm trying to go for gold chrome I got an estimate of 6k so I'm debating still trying to find a lower price
Gold chrome wrap material alone is around 3k. Not to mention the difficulty of install. 6k is a fair price for what you want.
I had my whole '16 Z06 wrapped in SunTek PPF. No cutting on the car. The only parts removed were the rear tail light bezels. Very easy to remove. The rear Corvette script was also removed and a new one reinstalled. The job was done with complete love and care. On top of the film CQUARTZ Finest was applied. $5500 for the total installation. See my channel for a video of it post installation.
Blabbing.....OMG...get to the point. Terrible Public Speaking..... and he’s not even in public just with his camera and seems nervous. Oh well at least he tried. He will get better with time
3 to 4. Is too much. Over priced
1000 to 1500 is ok for that.
Im gonna do it myself
TigerTrigger did you?
Huge fender gap in rear wheels. Never noticed how large it was before.
They need to bring that wayyyy down. Obviously not via lowering the car. It's already low enough. They need to rework the panels and wheel wells to bring it much closer to the wheel.
My '16 M3 rear fenders look like they're sitting on the tires, and that's 100% stock suspension setup.
Thinking about a CTS-V in 2019. I just can't do pure 2-seaters. Can't even lay back if you want to, lol.
Wrap looks damn nice though.
I would wrap, but I already have XPel Ultimate on most of the car, so that would mean pulling of $5k worth of PPF, the wrapping, then putting XPel back on, because I'd want the wrap protected.
Well... next car I guess. Too late for me on this one.
GM has a policy that all their cars will be able to have snow chains easily applied and be driven with snow chains in winter conditions and this is the reason you have such a large gap there.
Lmao hit a speed bump without having a gap in the fender well...
I would go with paint before any kind of wrap just my opinion.
Material. Only 300 to 400
Taking apart the car isnt easy around 49hrs
go ahead and buy the material and do it yourself, see how that works
Bumpers are not meant to be pulled out multiple times ? Lmao wtf
Absolutely NOT 4K for what you had done … AT ALL … it’s not Chrome or textured like carbon fiber … BS … AND NO PANELS TAKEN OFF!!!! Nah man nahhhhh …
Your friend either BS’d you or you have no clue at all what you’re talking about