I did not think you were going to cut that web design from a solid piece. I thought it was round stock and you cut, bent, and welded it. The talent you show with a torch is awesome. Thanks for such a detailed video. I wish someone would donate a steel building and a couple of go pros to you. It would benefit all of us fans of yours. Great job dude.
I really like the dual tubing around the frame. Making the spider web from a flat sheet was awesome. And the added detail to the side gussets really makes it stand out. I am inspired now to go make one for my Ram. Thanks
Nice rack! That said... You work around some weather issues, damn. Great talent, your assistant couldn't even help it was so crowded... Great vid, Great channel.
You have a creative talent and a mechanical talent. Put the 2 together and you have fabricated some amazing things! As always, I enjoy watching you create! It also helps me.
I recently became a subriber-great videos,and excellent work!! I've been a high pressure pipe welder for 35+years,You are a true artist,and well thought out fabricator.Keep 'em coming,and GOD BLESS!!
Wow , bet others will want custom bed attachments to protect there Windows. Good job , if you make more patterns could be of use to cut them out before welding them in. YUPP I love watching a craftsman at work. Thank you and God bless you and the family .
Everyone keeps telling him to get a plasma cutter. The torch is working just fine. Haha. Yea its nice to have it, but then you have to have an air compressor that can keep up. It adds up. Especially when you buy something decent that you can count on to last.
hey mate, love your work. . I have a question which i think you have probably been asked a thousand times before. can you tell my why you chose oxy acetylene instead of plasma cutting? do you have more control? i haven't used either before and I was thinking about one of these processes as my next purchase as my welding improves.
hey your videos are the best thanks.can you tell me what the tool I saw you use to mark angle cuts on pipe. looked like it held soap stone some kind of protractor
Really great fab work. How many total hour do u have in that ptoject? Sometimes it's less wear on the body to just put those hours into overtime and have a shop laser cut a design u make on computer. Then weld up the tubing. Just an idea from a aircraft structures guy.
I liked what you did there. I'm not sure how you attached the rack and it appears the center brake light opening may be too high to be seen from the rear?
Beautiful work... the hard way, but awesome none the less. If anyone ever needed a plasma-cam or water cutter it's you! Next one, why don't you lay it out and take it to a bigger shop to be cut on a laser table? Save you loads of work and time!
That was some amazing work Allen, mad torch skills. I'm a novice welder, I was told you couldn't weld outside with a mig with gas. Now I know on a very windy day it would blow you gas away, is it possible to weld on a calm day outside with gas? Or should you always use flux core outside? Thanks.
I noticed you use your torch a lot for cutting designs in sheet metal. Have you tried using a powerplasma cutter? Any thoughts on the pros and cons of either method?
love your vids a true craftsman how long has that ryobi been working? i always thought they were crap had a couple over the years and they burn up in a couple months of light use get hot and just die maybe i'll give it another try..... you are skilled and seem like a good person that's the main reason i watch your vids thanks
I like the ryobi grinders, the brushes burn up quick sometimes but just take the screw out of the side and its replaceable. for the price tho, they are pretty good
I did not think you were going to cut that web design from a solid piece. I thought it was round stock and you cut, bent, and welded it. The talent you show with a torch is awesome. Thanks for such a detailed video. I wish someone would donate a steel building and a couple of go pros to you. It would benefit all of us fans of yours. Great job dude.
I typically loath headache racks. You made a beautiful one. GREAT JOB!
awesome work Allen I like how you do it with regular tools us average guys have. You have great talent
I really like the dual tubing around the frame. Making the spider web from a flat sheet was awesome.
And the added detail to the side gussets really makes it stand out.
I am inspired now to go make one for my Ram. Thanks
It's called "use what tools you have and work harder"....great job friend!
That rack is sick! This one has inspired me.
holy crap...your a hell of a craftsman.....nice job...I like that you said you goofed up...showed us...then showed your update...
You sir are not just a craftsman, you are an artist! I’ve never seen a more beautiful headache rack.
awesome work ...you really need a small plasma table...you would love it
Love the "high-tech" look done with some "low-tech" tools.. True craftsman. Keep up the good work.
That's why I got me a cnc
Nice rack! That said... You work around some weather issues, damn. Great talent, your assistant couldn't even help it was so crowded... Great vid, Great channel.
Allen, good tip on the jigsaw - that will come in handy
yea I've done some surprising things with a jig saw
A labor of love my friend! Looks great as does everything you do always does! Keep up the awesome work friend!
Bloody hell you do some lovely work mate , it looks as wet there as it usually is here in the uk🇬🇧👍🏻🤣🤣
Nice rack. You do better with that torch than I do with my plasma cutter.
now thats one classy lookin rack bro allen awesome design 👍👍👍👍👍👍👍👍👍👍👍👍👍👍
thanks!!
You have a creative talent and a mechanical talent. Put the 2 together and you have fabricated some amazing things! As always, I enjoy watching you create! It also helps me.
I recently became a subriber-great videos,and excellent work!! I've been a high pressure pipe welder for 35+years,You are a true artist,and well thought out fabricator.Keep 'em coming,and GOD BLESS!!
Wow you are a great fabricator thank you for sharing this video God Bless....
thanks! God bless you as well
nice to see other versatile & talented person like myself, nice tidy workmanship. you got there in the end.
Wow , bet others will want custom bed attachments to protect there Windows. Good job , if you make more patterns could be of use to cut them out before welding them in. YUPP I love watching a craftsman at work. Thank you and God bless you and the family .
great work Allen, keep the videos coming
You're a talented fella ................Very nice work
Nice project, looks great on the truck.
Cool brother.
Great work !
I have also done a lot of welding outside.
you are talented bud. well done. your videos are awesome!!!
That's a sweet build mate. Cheers.
Wow. You are a craftsman.
thanks!!!
Lotta, work as most quality fab work is. Looks good.
Fantastic job there mate and great design
+mtm 4x4 thanks!
If you had a powerplasma cutter there would be no limit to your work. Fantastic job man.
That is freaking awesome!!! Great job bruh!
I love your work. A Powerplasma cutter would probably cut your fabrication time down.
You did some nice work but I would like to get the measurements for the length of tubing that is for the framing of it
You have to measure it to your truck
From another fabricator, you do great work! Just need to upload in at least 480p.
thanks! I really do need to upgrade my video making
You reall do beautiful work. Keep it up! I say get a gopro hero 4 and a handful of the cheap UV lens filters in case you hit it with the grinder
Great job 👍👌👍
Everyone keeps telling him to get a plasma cutter. The torch is working just fine. Haha. Yea its nice to have it, but then you have to have an air compressor that can keep up. It adds up. Especially when you buy something decent that you can count on to last.
lincoln tomahawk
Very good work. Great job.
That is sharp, my friend!
great work man!
Wow... That is Nice... Great Job... Great Videos...
Allen, love the work - but you seriously need to make yourself a CNC plasma table!!
very talented and creative here man...nice
Allen. Crisco an an acid brush for the jigsaw cuts. This coming from me with a plasmacam table and PM 45 and 65 !
thanks for the tip!!
yup - 45 here too - the best! I can cut 1" thick with my 45 - amazing
thanks for sharing, looks awesome
excellent work
hey mate, love your work. . I have a question which i think you have probably been asked a thousand times before. can you tell my why you chose oxy acetylene instead of plasma cutting? do you have more control? i haven't used either before and I was thinking about one of these processes as my next purchase as my welding improves.
badass work. I'm going to make me one but . A dale Jr one
thanks! that would look good too!
Dale Jr wife made him Quit... So I Quit Dale Jr....
hey your videos are the best thanks.can you tell me what the tool I saw you use to mark angle cuts on pipe. looked like it held soap stone some kind of protractor
That looks awesome
Bad Ass Bro!!.. Nice as always!
thanks!!
Excellent build, but no paint or anything to protect it from the elements?
No, I wanted it to rust, it's on a Toyota now
@@Allensweldingwoodworking OK
AWESOME job 👍👍👍
Really great fab work. How many total hour do u have in that ptoject? Sometimes it's less wear on the body to just put those hours into overtime and have a shop laser cut a design u make on computer. Then weld up the tubing. Just an idea from a aircraft structures guy.
Wish the video quality was a bit better but that looks dope as hell! Awesome video
I liked what you did there. I'm not sure how you attached the rack and it appears the center brake light opening may be too high to be seen from the rear?
Nice job thanks showing us
Beautiful work... the hard way, but awesome none the less. If anyone ever needed a plasma-cam or water cutter it's you! Next one, why don't you lay it out and take it to a bigger shop to be cut on a laser table? Save you loads of work and time!
thanks! a plasma table be a lot easier but some stuff I just like to see if I can do it by hand
That was some amazing work Allen, mad torch skills. I'm a novice welder, I was told you couldn't weld outside with a mig with gas. Now I know on a very windy day it would blow you gas away, is it possible to weld on a calm day outside with gas? Or should you always use flux core outside? Thanks.
Yes sir calm day with mig gas. I weld gal tube out of my shed on calm days.
That is great work
Awsome rack. But I get anciety to see you welding with no gloves.
That's badass!
Allen the track cutter!
Very nice Bro
Dambbb...nice job...
where you located Allen I need a rack for my dodge
Very nice!
You are the shit, i watch all your videos
looks good..
I noticed you use your torch a lot for cutting designs in sheet metal. Have you tried using a powerplasma cutter? Any thoughts on the pros and cons of either method?
You need to look after your Lungs young Fella God only gave you one set.SAFETY, SAFETY all ways comes first.SAFETY, SAFETY
Sharpppppp!!!
great job
That thing is bad ass
Hell I thought the webb was going to be made of logging chain?
GREAT JOB ALLEN!!
what size steel plate you used..?
Thanks, its 11 gauge plate and 2"/1" tubing
good.,THANKS FOR ANSWERING..!!
very nice! curious what would you charge for that?
Nice job !!! How much if u sell ?
if I sold it..probably $300-$350
Awesome!!!👊💥😁
Looks great, but if you ever have to replace your back glass, it will be a pain in the ass
Subaru STi just unbolt it’s from truck, that rack has been on 3 trucks now
That is sweet
What did you use to hold the plate in the center when you pushed it in
Nice
What degree angle cuts were used for the top corner pieces?
Your good
Grind one of your files down to fit your sawzall
its nice work the third brake light should have been lower otherwise great job
thanks!
love your vids a true craftsman
how long has that ryobi been working?
i always thought they were crap had a couple over the years and they burn up in a couple months of light use get hot and just die
maybe i'll give it another try.....
you are skilled and seem like a good person that's the main reason i watch your vids
thanks
I like the ryobi grinders, the brushes burn up quick sometimes but just take the screw out of the side and its replaceable. for the price tho, they are pretty good
thanks maybe i'll try one
your cutting skills are top notch
hope you have a great xmas
love seeing all your animals and the vids
kind of finish & maybe lights?
going to have it powder coated, probably won't add lights
i know this video is sorta older, but do you have good air now???
Erik Doering good air? What do you mean?
How much for this masterpiece?
thats gotta be worth 1200 or more !
www.spyderindustries.com
What size square tubing you using? 2×4 or 2×3
2”/1”
@@Allensweldingwoodworking thank you
damn.. if you had plasma cutter....
This channel would be awesome if you had a little bit better of a camera!
Quality.
Did you clear coat it ?
🍒
Superrrr
🤘👌👍
You need to buy a plasma cutter and you have mire cleans cut and less work for you