I have found coupler trip pins to be an absolute menace to society. I started using pliers to bend mine up further. If you don't use the magnet uncouple thingy, cutting them off entirely might be a good idea. But thanks for posting this video!
Wow! The HO FRA are going to be busy! I'm trying to imagine how small the wheel gauges have to be to measure the flanges LOL! Next thing we know it, the HO NTSB will get involved and we'll see HO wheel truing shops and HO track gangs popping up all over the place!
So that’s what happened the the Marklin engine from Thomas The Tank Engine & Friends after series 1 ended production but prior to being sent to Bigg City Port
So that’s what happened the the Marklin engine from Thomas The Tank Engine & Friends after series 1 ended production but prior to being sent to Bigg City Port
i'd bet with that fan-powered meme unit, it's having trouble intaking the air it needs to push back since it's right up against the back of the teeny cab unit. It's able to push a bit at the start because it uses the still air all around it, but then after that has trouble sucking more in to blow back. Moving the fan farther back, on top or in front would do the trick, if any of these are even possible
1:35 to 1:40 So that’s what happened the the Marklin engine from Thomas The Tank Engine & Friends after series 1 ended production but prior to being sent to Bigg City Port
You'll have to scratchbuild one, just need an Athearn hustler chassis and the fan setup. Dedicated video on channel covers more details under the hood.
Love it, that's what I miss about my set up, figure out why it crashes. at the moment no room so it all sits in box's love everything about it, it isn't easy, but some got to do it, thank you.
I'm pretty sure a lot of that was the result of failing to follow standards. Especially low coupler trip pins. It's simple get a kadee height gauge, and if the pin touches the base plate, bend them up slightly with pliers or cut off entirely. Then some is probably dirty wheel or track related as well.
as much of a mess it would be to clean up. i would like to fill empty hopper cars made of metal with small pebbles and stone but make a almost realistic engine that can in theory spray sand on inclines and allow it to move with a much heavier load. would also make derailments seem much cooler.
Does anyone remember the VHS tapes sort of like this with the music and the guy with the glasses waving at us from the caboose? Edit: It was called "I Love Toy Trains" and they're on UA-cam.
I wonder, Where are Alco FA/FB units? I watched a video about the Rapido Alco FA/FB-2 units, and the Canadian Pacific FA-1 with FB-2 looks pretty good.
Now I know why there are so many derailments on this layout… those are DCC engines you have running around. No wonder they don’t behave! XD 2:11 Also what is this hellish Amtrak abomination and why did you create it-
@Cyber_Horse_Studios87 Found the Amtrak piece at a show, it was too chaotic not to grab. There's a video of it solely running on channel as well. The layout would do the same, whether it was DC or DCC under the hood.
@@SCL3618 ah okay so you didn’t build it. Still the moment I saw it I was filled with a mix of horror and amazement. A rail zeppelin made out of an Amtrak. Also yeah that’s fair, I’ve just always found DCC to be a bit more of a chaotic system. XD
Them things are derailing more than NS💀
Old honse will always hold the record.
Lol😂
Agreed
Bros layout NS simulator now 💀💀💀💀
@@OfficialDenverRioGrandeWestern Enough club members run NS junk, was only a matter of time!
That car derailing at 0:08 while the rest reconnected after the turn was perfect timing.
Auto-shortening train.
The ore hopper bouncing down the hill was very enjoyable. Could watch that all day.
And no messy ore to clean up😆
To quote I ❤️ Toy Trains…
“Oh no!”
1:48 😂 the model train layout is acting like pen central 2.0
Ouch! Right in the Bankruptcy!
I have found coupler trip pins to be an absolute menace to society. I started using pliers to bend mine up further. If you don't use the magnet uncouple thingy, cutting them off entirely might be a good idea. But thanks for posting this video!
The reason why the uk's hook and loop model coupler system is peak to me
@@Mike-no6fvThe UK appreciates your appreciation.
The one where the 0 6 0 farted cracked me up
Yep, that one had me laugh out loud! It was very unexpected and funny as hell!
1:38 Caught me off guard 😂
I absolutley lost it when the Marklin tank engine farted smoke at 1:36.
0:53 excavator: "I'm freeee!" then "Oh no, I'm going back!"
Keep ‘em coming 3618!!!
Wow! The HO FRA are going to be busy! I'm trying to imagine how small the wheel gauges have to be to measure the flanges LOL! Next thing we know it, the HO NTSB will get involved and we'll see HO wheel truing shops and HO track gangs popping up all over the place!
Yay! Part 19! 😊
WHAT IS THAT GOOFY AAH AMTRAK PROPELLER LOCOMOTIVE?!?!
Covered in a dedicated video on channel!
@@SCL3618eowowksw
1:38 *POOT*
Let it rip!
1:37 spit my drank all over a few locos lmao 😂
Even though the closest thing I have to a proper model train layout is TOMY Thomas toys on a grass map this is still relatable
surprised that BC rail didn't cause any problems this time!
That consist behaves well, only issues with certain portions of this layout.
that makes sense.
Love that barrel roll from the Rio Grande hopper.
The German tank engine farded 💀
Marklin: I don't feel so good
That's a Roco engine, but very similar to Marklin offerings.
So that’s what happened the the Marklin engine from Thomas The Tank Engine & Friends after series 1 ended production but prior to being sent to Bigg City Port
@@SCL3618how do you fix it
1:16 looks like Grandma needs a nap, she seems a tiny bit tired to run up grade
The sound effects are simply.. muah 😚
That's why we keep them around!
this is a early christmas gift (entertainment)
that BR 80 that Literally shat itself. 💀💀💀
So that’s what happened the the Marklin engine from Thomas The Tank Engine & Friends after series 1 ended production but prior to being sent to Bigg City Port
So marklin got sent to bigg city port for farting
2:01 "and y'all thought I made this stuff up!" LMAO
i'd bet with that fan-powered meme unit, it's having trouble intaking the air it needs to push back since it's right up against the back of the teeny cab unit. It's able to push a bit at the start because it uses the still air all around it, but then after that has trouble sucking more in to blow back. Moving the fan farther back, on top or in front would do the trick, if any of these are even possible
Imho i think a cowling would work better, given the shape of the blades. Seems to be pushing air more to the sides if anything
@@mezkhalin This too. 👆Brilliant idea, right here
1:35 to 1:40
So that’s what happened the the Marklin engine from Thomas The Tank Engine & Friends after series 1 ended production but prior to being sent to Bigg City Port
Your layout needs an R. J. Corman emergency crew to handle all the derailments :)
Definitely something to be said for the solid fake ore loads. I used to use the real style loads, but often spent a lot of time sweeping them up.
NS is that you....oh wait its CPKC lol 😅...awesome video dude😅
Nahh, Beaver can't beat the stupid horse on fireballs 😂 thanks for watching!
@@SCL3618 Lol your welcome dude
Bro you need to upgrade those tracks and those trains that's why they're crashing all the time
Club happily accepts monetary donations to make that happen!
That diamond is the Diamond of Death there. I mean, a blind guy could see it needs work.
I wish I had a layout like that! But I’m only a teenager! lol 😂
3:29 that sounds like the same horn from the movie "American Graffitti" where thr main guy has to tie a poloce car to a light pole
2:25 *WERE CAN I GET ONE OF THESE*
You'll have to scratchbuild one, just need an Athearn hustler chassis and the fan setup. Dedicated video on channel covers more details under the hood.
It's the Joe Biden Express!!
All we had to do was follow the damn train CJ
1:58 what app is that?
Engine Driver- Android version of JMRI Withrottle.
The layout can’t catch a break, can it.
Are these just doing that on purpose or is it still accidental? Lol
No fun in staging, these are all as it comes. Also why it takes so long between videos.
@@SCL3618 I am just so amazed that these things happen every single time.
Thank goodness that giant hand-shaped sky crane is there to clean things up!
Can you do a video on just hon3
There's a video or 2 covering that layout on channel. Most recent was last run before teardown.
No elves or reindeer were harmed in the making of these derailments.
FINALLY A NEW INSTALLMENT INTO THE SERIES
Takes a while to put together! Had enough leftovers after last week to get it over the line.
@@SCL3618 well that's good that you had enough, I always get excited when one of these get pumped out!
That’s a fender bender!
the NG one in the start was a stunt lol
Nope! Car picked the switch just before curve, engine stalled briefly and kicked it over once it jerked forward.
@@SCL3618 Oh wow
0:39 DECOUPLED!
This looks like the real american trainlines, so realistic!
Do you just have bad luck on this layout🤣🤣🤣
That's been the deal since day 1!
Is that a club layout
Yep! Cab ride video in my Playlist will show it off more.
Part 19 was already needed
A great video
Love it, that's what I miss about my set up, figure out why it crashes. at the moment no room so it all sits in box's love everything about it, it isn't easy, but some got to do it, thank you.
Where is your club located?
NC, more in depth details are in the layout cab ride video.
Proof that model railroading is a dangerous sport!
This is gold!!!!!!!!!!!!!!!😆🤑👍👍👍👍👍👍👍🕶😜😜😜😜😜😜😜😜😜😜😜😜😜😜😜😜😜
1:10 I like classic train ❤
I just now noticed this video
Looks like the Escanaba & Lake Superior here in Mich.
1:37 This had me laughing so hard!
Oh, Wow😂 Inspired to share some of my own😅
That's how this whole thing got started!
The little engine that couldn’t.
I'm pretty sure a lot of that was the result of failing to follow standards. Especially low coupler trip pins. It's simple get a kadee height gauge, and if the pin touches the base plate, bend them up slightly with pliers or cut off entirely. Then some is probably dirty wheel or track related as well.
Factory standard height cars with no sag fall victim to this joint as well. There's no rhyme or reason.
Engineer Bob Sez " Always make sure that your Kadee glad hands are at proper height and all wheels are checked to be sure they are at proper width"
I had to send a crew to rerail the derailed locomotives and railcars
So I'm not the only one what has trouble keeping his trains on the tracks!
#RunningTrainsBetterThanNS
Not hard to do at this point!
That excavator has seen some scary s*it!!
I love your video, and the sound affects !!
Thanks for watching!
How come none of those coal cars spill there loads
I made the loads on top of foam blocks, all glued down instead of running live loads.
@@SCL3618 CHICKEN!!
@@markh.6687 If you want to come clean it up, be my guest!
Trucks always cause trouble, sometimes it almost feels like it’s on purpose
I think you need a train full of Swift trucks.👍😆
The amount of NS junk on this layout has side effects, Swift of RR's comes home to roost!
Bigger prop. The body is blocking all the air.
as much of a mess it would be to clean up. i would like to fill empty hopper cars made of metal with small pebbles and stone but make a almost realistic engine that can in theory spray sand on inclines and allow it to move with a much heavier load.
would also make derailments seem much cooler.
Operations night at this club must be a hoot!!! I have to ask - who brings the beer????
All of this can be accomplished as-is sober. Albeit some drinks would make it more fun.
Oh the humanity!!!
1:35 We have the appearance of markling
You should have a vid of just derailments on the diamond
*Detector Alarm* Defect Detected *Break*
Merry Christmas SCL3618
Merry Christmas!
@@SCL3618 and a Happy New Year
2:12 WHAT IS THAT I WANT IT
I need a version with Train Town effects and voice snipets....
The fan on that amtrak streamliner isnt sucking in sufficient air, hence why it isn't working good
i think the mow crew has been on strike
No; the settled the strike and came back to work seriously intoxilated...impixleated...I mean drunk!
Does anyone remember the VHS tapes sort of like this with the music and the guy with the glasses waving at us from the caboose?
Edit: It was called "I Love Toy Trains" and they're on UA-cam.
I hate to see the cars roll down the hill but it was a blast.
Rio hopper was a $4 show find, added the load myself. Not the worst car to take the tumble when I need to revamp the load anyways lol.
I wonder, Where are Alco FA/FB units? I watched a video about the Rapido Alco FA/FB-2 units, and the Canadian Pacific FA-1 with FB-2 looks pretty good.
Don't own any F A/B sets currently.
@@SCL3618, well, then let’s hope you do Some day.
GOBBLESS BORTHER!
WE ROLLIN GOOD UNTIL THE CLIBBINS HIT HOSS!1! BARB WASN'T HAPPY.
1:10 I wonder if 346 was smelling Kenosha and that’s why it didn’t wanna run well
3:06 what is that.......?
Tomix ED79 pulling Kato JR Hokutosei consist.
@@SCL3618 Thanks 👍
Im always scared that derailments will short circuit my controller
Not very likely in HO. Most controllers have circuit breakers built in.
Phew ok@@SCL3618
Where is this building cause there is no way your basement is all trains
Club layout, details in the cab ride video.
I would like to see mo footage of your jw bowker
I have fun when l watching this video
Now I know why there are so many derailments on this layout… those are DCC engines you have running around. No wonder they don’t behave! XD
2:11
Also what is this hellish Amtrak abomination and why did you create it-
@Cyber_Horse_Studios87 Found the Amtrak piece at a show, it was too chaotic not to grab. There's a video of it solely running on channel as well. The layout would do the same, whether it was DC or DCC under the hood.
@@SCL3618 ah okay so you didn’t build it. Still the moment I saw it I was filled with a mix of horror and amazement. A rail zeppelin made out of an Amtrak. Also yeah that’s fair, I’ve just always found DCC to be a bit more of a chaotic system. XD
No mass evacuations were caused in the making of this video.
1:54 what (me near the train derailment be like)🤐
2:19 Hola?
Pov NorthlansZ:
Cool trains🚂🚃🚃🚃🚃🚃🚃🚃
if u slowed down and check coupler height most of ur problems would be fixed
Running slow at this place gets you run over, mainline run = mainline speeds.
01:36 BR 80: _Entschuldigung, ich musste Furzen!_