Yes, very helpful indeed as im looking at purchasing the i-2000 48v version. I think I’ll strip it to give it the once over and a drain groove and hole with spout as well as a look at the magnet attachment and casing sealing….. 2 years in the air before failure isn’t reassuring but hopefully with a few mods I can stretch that out…..many thanks for your post👍
Thanks Dan. Not sure why people give negative ratings …. I believe this a fair and well documented review. The assemble quality is very low, the shaft quality…says it all. I appreciate the time you spent sharing your experience with people from all over the world. Looked at Bergey XAl1 and is about AU$10,000 her in AU - ouch! Cheers, Raz
I dont understand the criticism in the comments, istabreeze outperforms any Chinese windturbine. Been running my i1000 for a year now and it is doing great. What people forget is, what inverter? what cable lenght and gauge? what height of the tower? is it free from trees and ground turbulence? I will soon order the i2000 windsafe model because im having some crazy winds here and had to shut down the turbine some times. Today i made 1.5Kwh in 6m/s winds, it usually sits around 1Kwh per day. hoping to dubble that with the i2000
2 to 3 kWh a day, it is impossible to rentabilize this product ! 1500 euros complete i-2000 installation, 0.16 euros/kwh in France, 11 years are needed to rentabilize (if nothing goes wrong). 2 to 3 kWh a day is very low. Solar panels would be much more efficient.
Thanks for the video. I was looking at one of these units. I think they are probably made for West Texas where it doesn't rain much. But I live in NE Oklahoma where it rains a lot. The more I look at wind turbines, the more they seem like inverters. They're both on the edge of failure, just a matter of time. Wow this looks kind of junky to me. Probably what I would consider good quality would cost thousands of dollars. Not sure why that is so. At this point I think I will make my own axial flux type of generator. I have a 10 ton hydraulic gear puller, lol. Something has to give. Too cheaply made for myself, the one you have. The blade hub is worthless if you can't use a puller. If it has to be re-designed and a bunch of lathe work to put O-rings in the case, it's not made well enough. Especially if you have to make a new rotor and shaft. Might as well make the whole thing. They should advertise it as being ideal for a machinist. I already have 1200 watts of solar panels so the wind generator will just be an add on to charge the battery bank in the winter. I have 20 marine batteries so far. If I can get a good wind generator going, I will get four more. If I have to buy one, I am looking at a 1 kw unit from Hurricane wind power. 600 watts would be plenty. Same thing as inverters, about 59 % of rated.
I disassembled the i2000 (it is identical to the i1500) and I can't replace the rotor due to the magnets. you can give me some tips for reassembling it?
1 What Controler did you use ?? 2 why did IT not perform??? What hight ??? was ther trees ??? Do like i do live a place wher ther is onley Winter vind or els No wind 180day a yer??? I know this performs like Solar power on a shady Day!!! But IT PRODUSES 24/7 every time ther is wind 3 who doe's not use lubrikant period 4 AC cords is allright !! The A is in the DC side !!! Not the AC sidel!!! .. I think this produkt looks nice .. but well ..
Klarer Bedienungsfehler, ab 13,5 schaltet der Laderegler in den Brehms modus um die Batterie nicht zu über laden! Das kann Sinn machen is aber für die meisten Systeme zu früh, viele hybrid Anlagen so auch meine laden bis 14 Volt oder sogar höher, wenn das Windrad dann eigentlich stoppt (rote led) aber trotzdem viel Wind ist bremst es sich selber kaputt! Auf meinem Kanal is ein Video wie man diesen Anfänger Fehler vermeidet!
Please i have the i2000 i pulled them apart but now i cant put the roller into the staler due to the magnet it always pull to one side is there a way to do that thanks
Somthing is wery wrong !!! This huge lunk can onley make nothing if realy put wrong together Did you use rectifier ?? MPPT or pwm Controler!! The fact you say the 3 AC leads are too small !!! Tips my hat In the ... You do not know difrence DC or AC AC is down truh mast thin AC leads DC rectifier Then huge DC leads .. PWM or MPPT chardge Controler!! !???? Somthing wery fishy her and IT's not the itsabreeez
When working, it put out a mere 100W or so in the same winds my Bergey puts out 800W. The moral of the story is buy a quality US made turbine, and you wont be disappointed. Istabreeze wont even provide any data on wind speed vs output. I can see why!
@@ve3cld i think you had bad luck..and now many years later its provided with data sheets..but always good to know weak spots to look after when buying these 👍
Good luck! I would ask for a refund and buy a Bergey. The "i" in "i1500" stands for "imaginary". Truly garbage. Bergey will supply a datasheet with graphs showing wind speed vs output. Istabreeze could not. Giant red flag.
@@ve3cld , I'm thinking that maybe if a computer program had been monitoring the moisture content in the field wave chamber along with temperature via sensors the program could have allowed periodic heating of the coils to burn off water via braking , like a default clean period
@@IONACOMPUTERS okay bro ..i bought All my stuff at .. SHTEPOWER.COM.. They got MPPT. Pure Sign Inverters .wind power tubines .. 2 x 500+Watt@48v 211doller a pop with 2000Watt MPPT Wind power Controler x2 +break resistens So i can buy new wind power turbines .. I alredy got 2x EPever6420 with 3000Watt PV East and 3000watt vest I get All morning and evening sun .. I want to expand to 2x 3000watt more PV In bad WETHER every panel makes 24x 0.3A@48v = 345watt .. or 7+ A 2 systems Will give 690watt .. my house onley draw's 300watt max PR hour in idel.. So 12.000watt and 2x500watt wind turbines .. can easely float me !! Got 16x 200A AGM so i got capasety enough !!
How is this a peace of crap,. You know nothing of AC Vs DC Wire He did not specify What Controler ?? He did not lubricate!! He did not specyfi Dumpload??? Aculey he did not specify any thing .. but used it for 2 yers With out any problems ???!!!???
Took my i1500 down to check it. 14 months in the air. Hub came off with puller easily. I did grease the key way and shaft. Maybe that helped. No sign of corrosion on ungreased portion of shaft behind hub. Took nacelle off (tricky). Bone dry. Like new. Back in the air now. Dawdling in about 10 to 15 mph, 150 to 220watts with the odd 300peak. I run my 24v model into a 12v bank to exploit lower wind cut in. Regularly sees 400 to 600w. Best peak was 1100watts last winter (peaks dont matter of course, just daily kwh). Bearing in mind that I'm running into a lower voltage (12v) bank I think that's good. No fancy mppt, just a £13 volt sensing switch ("a30" as seen on Toys For Watts channel) and £15 150amp truck relay. Start dump 14.7v (avoid conflict with solar controller), stop 13.5v. The only other turbine I'm aware off that's half decent is the B and C or Green Energy chinese turbine (500w and 800w models). We can't all afford 10k for a Bergey!
It produced a little over 400 W maximum with a 50 Km/h wind. Very disappointing. My Bergey XL1 that replaced it puts out an easy 1 KW in 40 Km/h winds.
If you stop water getting in then there would be no ventilation. That is another problem. If that was producing 1500watt it would get a little worm and there is no way cool air is going to go through the stator if it is closed at the back end. The Chinese produce items for the moment. They never think of the future and the reverberations when it fails due to bad designing and quality control. Once you lose a client they are lost forever. Good effort with your video at least you are warning other people of the bad product.
Yes, very helpful indeed as im looking at purchasing the i-2000 48v version. I think I’ll strip it to give it the once over and a drain groove and hole with spout as well as a look at the magnet attachment and casing sealing….. 2 years in the air before failure isn’t reassuring but hopefully with a few mods I can stretch that out…..many thanks for your post👍
dont. I have one and its behive like 24v one
Thanks Dan. Not sure why people give negative ratings …. I believe this a fair and well documented review. The assemble quality is very low, the shaft quality…says it all. I appreciate the time you spent sharing your experience with people from all over the world. Looked at Bergey XAl1 and is about AU$10,000 her in AU - ouch! Cheers, Raz
So changing the bearings and use something to seal the rear and front cover and use other better good glue this will actually make it an good turbine
Great video, lots of great technical information to chew over before jumping in. Neodymium magnets . . . all I can say is JB Weld.
Put 3m 5200 on the outside seams and/or just a little tiny bead on the outer part of the inside seam so its still a able to tear apart.
I dont understand the criticism in the comments, istabreeze outperforms any Chinese windturbine. Been running my i1000 for a year now and it is doing great. What people forget is, what inverter? what cable lenght and gauge? what height of the tower? is it free from trees and ground turbulence? I will soon order the i2000 windsafe model because im having some crazy winds here and had to shut down the turbine some times. Today i made 1.5Kwh in 6m/s winds, it usually sits around 1Kwh per day. hoping to dubble that with the i2000
2 to 3 kWh a day, it is impossible to rentabilize this product ! 1500 euros complete i-2000 installation, 0.16 euros/kwh in France, 11 years are needed to rentabilize (if nothing goes wrong). 2 to 3 kWh a day is very low. Solar panels would be much more efficient.
@@monsieurd.6890 Solar Panels work in sunny areas.
Wind Turbines work in windy areas.
To claim "solar panels are more efficient" is just d u m b.
@@monsieurd.6890 yeah except this works 24 hours and on the cloudy days
thanks for posting this, much appreciated.
Very informative video, thank you very much.
Was it installed in a very rainy place? Maybe the corrossion is not to high in dry zones.
Thanks for the video. I was looking at one of these units. I think they are probably made for West Texas where it doesn't rain much. But I live in NE Oklahoma where it rains a lot. The more I look at wind turbines, the more they seem like inverters. They're both on the edge of failure, just a matter of time. Wow this looks kind of junky to me. Probably what I would consider good quality would cost thousands of dollars. Not sure why that is so. At this point I think I will make my own axial flux type of generator. I have a 10 ton hydraulic gear puller, lol. Something has to give. Too cheaply made for myself, the one you have. The blade hub is worthless if you can't use a puller. If it has to be re-designed and a bunch of lathe work to put O-rings in the case, it's not made well enough. Especially if you have to make a new rotor and shaft. Might as well make the whole thing. They should advertise it as being ideal for a machinist. I already have 1200 watts of solar panels so the wind generator will just be an add on to charge the battery bank in the winter. I have 20 marine batteries so far. If I can get a good wind generator going, I will get four more. If I have to buy one, I am looking at a 1 kw unit from Hurricane wind power. 600 watts would be plenty. Same thing as inverters, about 59 % of rated.
Excellent review.
hi, is the winding single wrapped, is the connection star-shaped, how many mm wire is used?
I disassembled the i2000 (it is identical to the i1500) and I can't replace the rotor due to the magnets. you can give me some tips for reassembling it?
Hi. Could you tell what production was at what wind speed? 😊
Did you ever get it back together?
1 What Controler did you use ??
2 why did IT not perform??? What hight ??? was ther trees ???
Do like i do live a place wher ther is onley Winter vind or els No wind 180day a yer???
I know this performs like Solar power on a shady Day!!! But IT PRODUSES 24/7 every time ther is wind
3 who doe's not use lubrikant period
4 AC cords is allright !! The A is in the DC side !!! Not the AC sidel!!! ..
I think this produkt looks nice .. but well ..
Hi Guys . Could You please measure resistance between phases on I-1500 24V I want to compare it to mine
Klarer Bedienungsfehler, ab 13,5 schaltet der Laderegler in den Brehms modus um die Batterie nicht zu über laden! Das kann Sinn machen is aber für die meisten Systeme zu früh, viele hybrid Anlagen so auch meine laden bis 14 Volt oder sogar höher, wenn das Windrad dann eigentlich stoppt (rote led) aber trotzdem viel Wind ist bremst es sich selber kaputt! Auf meinem Kanal is ein Video wie man diesen Anfänger Fehler vermeidet!
Selam sargısi tek mi sarılmiş ve kac mm tel kullanilmistir
Please i have the i2000 i pulled them apart but now i cant put the roller into the staler due to the magnet it always pull to one side is there a way to do that thanks
Did you get it back together yet? How?
what sort of amps were you getting out of the generator when it was working
In a gale force wind - maybe 10 or 11. My Bergey XL1 blows the Istabreeze out of the water - I consistently see over 1 KW in 30 KM/H winds.
What sort of wattage was coming out of the Bergey XL1 at 15 MPH wind speed?
Somthing is wery wrong !!!
This huge lunk can onley make nothing if realy put wrong together
Did you use rectifier ?? MPPT or pwm Controler!!
The fact you say the 3 AC leads are too small !!! Tips my hat
In the ... You do not know difrence DC or AC
AC is down truh mast thin AC leads DC rectifier Then huge DC leads ..
PWM or MPPT chardge Controler!! !???? Somthing wery fishy her and IT's not the itsabreeez
Model 5 blades is more good?
When it was working, did it produce decent power?
When working, it put out a mere 100W or so in the same winds my Bergey puts out 800W. The moral of the story is buy a quality US made turbine, and you wont be disappointed. Istabreeze wont even provide any data on wind speed vs output. I can see why!
@@ve3cld i think you had bad luck..and now many years later its provided with data sheets..but always good to know weak spots to look after when buying these 👍
lol, I have a 2kw version coming , looks like the 2kw rating may be a con , if it is I will let the world know , thanks
Good luck! I would ask for a refund and buy a Bergey. The "i" in "i1500" stands for "imaginary". Truly garbage. Bergey will supply a datasheet with graphs showing wind speed vs output. Istabreeze could not. Giant red flag.
@@ve3cld , I'm thinking that maybe if a computer program had been monitoring the moisture content in the field wave chamber
along with temperature via sensors the program could have allowed periodic heating of the coils to burn off water via braking ,
like a default clean period
@@IONACOMPUTERS how did the 2kw do
Did you lubricate !! Did you use a Controler??? What sort!!
??
@@kennethschultz6465 avoid this unit
@@IONACOMPUTERS okay bro ..i bought All my stuff at .. SHTEPOWER.COM..
They got MPPT. Pure Sign Inverters .wind power tubines .. 2 x 500+Watt@48v
211doller a pop with 2000Watt MPPT Wind power Controler x2 +break resistens
So i can buy new wind power turbines ..
I alredy got 2x EPever6420 with 3000Watt PV
East and 3000watt vest I get All morning and evening sun ..
I want to expand to 2x 3000watt more PV
In bad WETHER every panel makes 24x 0.3A@48v = 345watt .. or 7+ A
2 systems
Will give 690watt .. my house onley draw's 300watt max PR hour in idel..
So 12.000watt and 2x500watt wind turbines .. can easely float me !!
Got 16x 200A AGM so i got capasety enough !!
What a piece of crap, thanks for the upload man really helped me dodge a bullet,👍
How is this a peace of crap,.
You know nothing of AC Vs DC Wire
He did not specify What Controler ??
He did not lubricate!!
He did not specyfi Dumpload???
Aculey he did not specify any thing .. but used it for 2 yers
With out any problems ???!!!???
Good luck with all the other bullets out there. Can dodge them. This is a good turbine. Mine works great and you are a fool
wouldn't think it be seized out in the weather for 2 years ??? Really Damn
Took my i1500 down to check it. 14 months in the air. Hub came off with puller easily. I did grease the key way and shaft. Maybe that helped. No sign of corrosion on ungreased portion of shaft behind hub. Took nacelle off (tricky). Bone dry. Like new. Back in the air now. Dawdling in about 10 to 15 mph, 150 to 220watts with the odd 300peak. I run my 24v model into a 12v bank to exploit lower wind cut in. Regularly sees 400 to 600w. Best peak was 1100watts last winter (peaks dont matter of course, just daily kwh). Bearing in mind that I'm running into a lower voltage (12v) bank I think that's good. No fancy mppt, just a £13 volt sensing switch ("a30" as seen on Toys For Watts channel) and £15 150amp truck relay. Start dump 14.7v (avoid conflict with solar controller), stop 13.5v. The only other turbine I'm aware off that's half decent is the B and C or Green Energy chinese turbine (500w and 800w models). We can't all afford 10k for a Bergey!
make a seal i used a kind of rubber cilecoon ...... parabond 600
how much power did it produce
It produced a little over 400 W maximum with a 50 Km/h wind. Very disappointing. My Bergey XL1 that replaced it puts out an easy 1 KW in 40 Km/h winds.
@@ve3cld The Bergey Excel 1kw seens to cost more than 10 times as much. Hard to believe there is nothing in between?
@@c2h7 yep very odd , mine on a test stand 4,5meters made about 500-700watt ,, for a better idea on output look at toys for watts channel
@@c2h7 DIY axial flux, hurricane wind power USA, auswind engineering QLD Australia etc.
If you stop water getting in then there would be no ventilation. That is another problem. If that was producing 1500watt it would get a little worm and there is no way cool air is going to go through the stator if it is closed at the back end. The Chinese produce items for the moment. They never think of the future and the reverberations when it fails due to bad designing and quality control. Once you lose a client they are lost forever. Good effort with your video at least you are warning other people of the bad product.
no ventilation? Look at the fins on the outside of the stator! Also this was made in Turkey.
I posted my video of the i1500 disaster
Stoney, looks like you lost a phase or were sent a defective or mis-labelled unit (24v)
@@thedavesofourlives1 USA it supposed to be 48. I have to say I'm not impressed with it the little time I had it..
Sorry the word is "warm"
These small scale turbines are manufactured like garbage and grossly overpriced. Time to disrupt them.