FlySky 3ch Receiver
Вставка
- Опубліковано 27 бер 2016
- These FlySky FS-GR3E 2.4Ghz 3-Channel Receivers arrived in the post today so I did a quick check to make sure they worked.
In reply to a comment here is the sequence I followed to bind the receiver to the transmitter
FIRST switch OFF receiver and transmitter
Check you know where the BIND plug should go on the receiver
Insert BIND plug in the BIND position on the receiver (still switched OFF)
Press and hold the BIND button on the transmitter
With your finger STILL on the BIND button, switch on the transmitter
Take your finger off the BIND button
Now switch ON the receiver
The light should go steady
Switch OFF the receiver
Switch OFF the transmitter
REMOVE the BIND plug from the receiver
Switch ON the transmitter
Switch ON the receiver
They should now be working.
I am not endorsing these products so I suggest you do your own search as the prices and specifications will vary and the links I used will probably be out of date when you come to read this. I just list the item title and you can cut and paste it into your eBay search. It will probably work on other online stores too.
FS-GR3E 2.4Ghz 3-Channel Receiver for Rc Car Auto Boat
Here is a selection of related playlists and videos
My FlySky playlist • FlySky
Flysky FS-T6 mixing • Flysky FS-T6 mixing
FlySky FS-GT3B radio control & GR3E receiver how to video tutorial. • FlySky FS-GT3B radio c...
Flysky FS GT3B How To Program And Bind Receivers • Flysky FS GT3B How To ...
FlySky FS T6 transmitter • FlySky FS T6 transmitter
Radio Control Remote Control playlist • Radio Control - Remote...
Radio Control Cars - Grandad Style • Radio Control Cars
RC Ducted Fan Boat • RC Ducted Fan Boat
RC upgrade New Bright Corvette • RC Upgrade New Bright ...
RC Rescue Recovery boat • RC Rescue Recovery Boat
Remote Control Door Lock playlist • Remote Control Door Lock
Hot Wire Styrofoam Plane playlist • Hot Wire Styrofoam Plane
Another Plane from Scrap Foam playlist • Another plane from scr...
Working with RC servos • Working with RC Servos
WLTOYS V911 2.4GHz RC Receiver playlist • WLTOYS V911 2.4GHz RC ...
My Channels
GrandadIsAnOldMan bit.ly/2T3x6RX
GrandadsOtherChannel bit.ly/2yW5uYb
Put a rubber band on it bit.ly/2T3OF4j
Number4 bit.ly/3cG4fuZ
You can help keep my channel running with coffee and cakes at Patreon bit.ly/35XFasL
If you don't like Patreon, you can use Kofi instead bit.ly/3dNusI9
Merchandise on RedBubble rdbl.co/2yJv56H
Merchandise on Cotton Cart bit.ly/2xZymOP
Merchandise on Teespring bit.ly/2Zby02T
Twitter bit.ly/3fMUgFN
Facebook bit.ly/3csbruk
Pinterest bit.ly/2WTuuXP
Instagram bit.ly/2WPLa2F
Thingiverse bit.ly/35WfSem
Tinkercad bit.ly/2WUrM4q
Playlists
GrandadIsAnOldMan bit.ly/3dI9mdV
GrandadsOtherChannel youtube.com/@GrandadsOtherCha...
Putarubberbandonit youtube.com/@Putarubberbandon...
Number4 youtube.com/@Number4GIAOM/pla...
I have thousands of videos on UA-cam, to find one try my search guides • UA-cam App Search and... or • How to search for my Y...
I am happy for you to show my content as part of your projects or in public settings, as long as you clearly credit GrandadIsAnOldMan. Please do not copy my video content and pass it off as your own.
#GrandadIsAnOldMan #GrandadsOtherChannel #Putarubberbandonit #Number4 - Наука та технологія
By the way on a final notes I want to thank you for your video I do appreciate the fact that you simply showed how it's done sometimes in videos people can provide way too much info but the fact that you showed exactly how to do it and was very easy about it is greatly appreciated as well as your quick response and advice I followed your advice with great success and now I have a small RC pickup but is quite powerful and will provide me lots of enjoyment without much worry unless of course I break it haha all the best wishes!
Thank you so much, a nice comment like this brightens my day 😊
Love your videos ! I'm 78 and still learning
That's great!
OMG grandpa
Hi,great video,I enjoyed watching you set up the boat receiver,just awesome,tony⭐️👍
Thanks Tony
I like the way you did the video, I did learn about binding and I knew nothing so thankyou so much
Thanks, I did this video back in 2016 and it was all still new to me then.
Clearest person I’ve seen so far thank you
Thank you
work nice for mine used in a nitro rc (ftx carnage nt), thanks you! :)
Thank you 😊
I'd like to share how I fixed my fly sky FXI6 from the ayron channel from jittering turned out the spring tension is too loose.... You have to put a space or under the screw then the screw hits the back of the transmitter casing so you have to take a driMelll and make more room You could notice that the elevator sticks bring has more attention from the factory So you increase this tension of the spring and no more jittering when moving elevator stick!!!
I’m glad you showed a truthful video so when I binding mine I no everything that can happen . Thanks for the video 👍🏽
Haha, thanks, yes a good example of somebody trying it for the first time with no previous knowledge so probably as honest as you could get, especially as I made so many mistakes in the process 😁👍
quick question, i want use this 3ch receiver for a light weight glider (Iam totally newbi with rc flyinh stuff), what battery and esc are you using there? thank you, also if you would have any recommendation about the rotor feel free to type as much as you like
thank you
Sorry for the late reply, UA-cam keeps hiding comments. If you want advice on starting model flying I would recommend this FliteTest playlist ua-cam.com/play/PL6IuSFWz4ktvupu_gxw1vn-sjBGOkJFHV.html
thanks
I hope you find FliteTest as useful as I have done :)
3 channel receivers a for cars and boats not sure they'll have the same range as full rc plane reciever with more channels
thank you
I am having a normal rc reciever .so can you tell me how to connect the servo to it so that it can automatically come in the center position after the control button is relased...actually i had tried but its not working...
You say a "normal receiver". Do you mean a cheap "Toy Grade" receiver where you control is just Left or Right with no proportional movement like a Hobby Grade system. If that is the case then you are out of luck. A hobby grade servo is not compatible with that sort of receiver. Toy grade works with just reversing the current flow so left has the current flowing one way and right has the current flowing the other way and the return to centre is done my a spring attached to the car bodywork. A hobby grade servo has 3 wires. the power is supplied on two of them and the third wire carries the signal from the receiver to the control board inside the servo and tells it how far to move the servo arm and in which direction. The control board inside the servo interprets that signal and turns the motor. There is a potentiometer attached to the shaft of the servo arm and the controller board measures the resistance of that potentiometer so it can tell how far it has moved and stops it at the required position. Just reversing the current into a hobby grade servo will not make it go backwards, in fact it will probably kill the controller board inside the servo. You can remove the controller board from inside the servo and connect power direct to the servo motor to drive it in each direction BUT YOU WILL NOT HAVE AN AUTOMATIC CENTRE FACILITY and the gearing in the servo will be too strong for a normal toy grade spring to return it to the middle. I will paste another reply here with my standard text on this subject.
My standard reply text to this type of question.
Hi chetan ponia, thanks for commenting. LONG ANSWER now. I am afraid that standard hobby grade servos are not directly compatible with toy grade RC receivers. They work in a different way. Hobby grade servos have a 3rd wire, that is a signal wire that the receiver uses to tell the servo controller board how far and which direction to turn the armature. The controller board in the servo then turns the armature the required distance.
Toy grade receivers just have two wires and have three signal states.
(1) Applying the battery plus and minus on the wires turns the steering motor one way.
(2) No battery applied allows the spring return to centre the steering.
(3) Applying the battery minus and plus on the wires turns the steering motor the other way.
If you connect the same two wires to an ordinary DC electric motor and apply "Left" the motor will keep spinning as long as you hold the transmitter on "Left". If you then apply "Right" then the motor will spin in the opposite direction.
In toy grade steering the only thing that stops the motor from spinning is the mechanics of the steering so the motor is still trying to spin but the steering arm has reached stop. On a hobby grade servo the electronics measure how far the steering has turned and stops the motor electronically.
Reversing the power feeding a hobby grade servo will probably damage the servo controller board, it certainly wouldn't make it turn the opposite way. If you remove the servo controller board and connect the output from the toy grade receiver directly to the motor inside the servo then it would go forwards or backwards like the toy grade motor but it would go all the way until it meets the internal mechanical stop inside the servo, so you would not have proportional steering. Also because the motor is heavily geared the normal spring on the toy car would not be strong enough to return the servo to the centre position when you want it to go straight, so you would be worse off than you were with the original toy grade steering. ??
Here is my playlist - Working with RC servos ua-cam.com/play/PLA5a2xPRSrB1nJ5I3Uzrjf41VCJzrab4p.html
The paper sheet 6CH Reciver ONLY buys this item, can other remote control be able to control it?
It is a FlySky item, so it is designed to work with FlySky controllers. You would need to look at the technical specifications for your controller to see if it is compatible. I did find the WL V911 receiver worked with my FlySky controller so maybe a WL controller might work with a FlySky receiver, but I haven't tried it, so I don't know.
Hey I’m having an issue where I get no response from the trigger, when I swap the steering servo and each cables over from channel 1 to 2 the throttle does work but only via the steering wheel and now the trigger still won’t control the steering servo? Is the transmitter and receiver faulty? Or both
Let me see if I understand what you are saying
Step by step
1. Steering motor works when you operate the steering
Drive motor does not work when you operate the throttle
On the receiver you swap the drive and the steering wires over
2. Drive motor works when you operate the steering
Steering does not work when you operate the throttle
In both cases nothing happens when you operate the throttle.
So you have proved that both motors work but you cannot prove whether it is the transmitter or the receiver that is faulty.
You are right, you cannot prove which is faulty without having another transmitter or another receiver that you know works.
GrandadIsAnOldMan thanks for your reply I do have another controller but it has the same issue now this either a series of very unfortunate coincidence or I have two bad controllers with the same issue I have tested both with 3 different escs 3 motors and different steering servos
If you have tried it with a different controller and you get the same issue then - as you say unless you have a very unfortunate coincidence - it does look like it is the receiver that is faulty. I have burned out the power transistors in many of my toy grade receivers on the drive motor output, usually by trying to drive the car through grass, the motor overheats, draws too much current through the receiver and the power transistor fails. On hobby grade receivers I have only had problems in the receivers when I have got them wet. All the power is handled by the ESC externally so when the ESC is overloaded and fails it does not affect the receiver.
Can we use that FS-GR3E 3ch rx with Flysky fs-GT5 transmitter?
I cannot speak from experience as I don't have an FS-GT5 transmitter. A quick search through UA-cam videos on the FS-GT5 does look like there may be problems getting it to bind with other receivers, but you really cannot tell from peoples comments as they often just have a dislike. Your best bet is to check on one of the RC forums. To be honest they are probably cheap enough to buy one just to try it for yourself.
Hello. I have a question. What is this small pcb circuit betwen battery pack and reciever? Thank you.
I think you mean the ESC. That is the Electronic Speed Controller used to control the electric motor. It also includes the BEC - battery eliminator circuit - which allows you to use the same battery for the motor and receiver. Systems without that feature mean you need two batteries - one for the receiver and one for the motor. In cases where you don't need a motor - maybe a glider - then you would use a BEC on it's own to ensure the correct voltage is supplied to power the receiver and maybe the servos.
@@GrandadIsAnOldMan Wow, thank you for Long answer. Im A begginer thats im asking lame question :) have a Good weekend. Best regards from Poland.
Thank you Mika. I can recommend FliteTest's RC Planes - beginners series ua-cam.com/play/PL6IuSFWz4ktvupu_gxw1vn-sjBGOkJFHV.html
I’ve got a new one with a new server and the steering is barely moving when I change channels over then move the wheel the throttle dosnt move all the way now
Sounds like you have a problem 🤔
And also my receiver f949 one of my servo is burnt can I solder normal servo (blue colour )
No you would not be able to simply solder a normal servo directly to the board. You say yours is burnt, I guess you mean the motor and not any of the chips. It might be possible to replace the motor but you may have trouble identifying a suitable replacement motor.
Hi, Can i use Li-Po 7.4v battery for ESC 30A with this receiver? does it burn the receiver for this voltage?
If your ESC has the built in BEC circuitry then it will supply the correct voltage to the receiver. A battery eliminator circuit (BEC) is an electronic circuit designed to deliver electrical power to other circuitry without the need for multiple batteries. Most ESCs have this facility but read it's specification to be sure. That means that if the ESC is designed to handle a 6S LiPo battery (23v) but it is equipped with a BEC it would still deliver the 5 volts to the receiver
@@GrandadIsAnOldMan hi.. im curious so that RX only can handle 5v suply or can be burn, is it?
@@alihamidiyt as far as I know virtually all hobby grade receivers are designed to work on 5 volts. They are usually powered from a special circuit in the ESC that drops the power from the main battery down to the 5 volts the receiver needs to operate. That circuit is called the BEC (battery eliminator circuit) because it eliminates the need to have a separate battery supply for the receiver. This Wikipedia article may help en.wikipedia.org/wiki/Battery_eliminator_circuit
Helpful. Thanks
😊
I have the same looking esc..my motor gums but my throttle will not work. Steering seems fine. Any ideas?
Honest answer, try a different ESC. I have burned out plenty of these ESCs but they are cheap so I but several at a time.
@@GrandadIsAnOldMan that was exactly the problem. I dug out an old Traxxas xl5 receiver and hooked it up and it worked like new. Thank you!!!
@@potatopower4026 what kind of ESC is that? i cant seem to find it.
@@Davis-tl1rc They are generic, unbranded escs from China. I find them on shopping apps and websites using a generic search. You can find them on eBay, Amazon sometimes, Gearbest, Geek/Wish, AliExpress, and more. Generally I'll type in "20A ESC" and find the same red colored ones on all those sites. You can also find others that look similar that have different functions and power ratings, that look similar as well. Keep in mind they are very cheap, but usually you have to wait a long time for shipping if you are in the USA since they are usually from China. To be honest, I like to order 2-3 at a time cos they are so inexpensive, and they are not always as tough as some of the very expensive ones. I will say this, they are good little devices, though, and I've never received a bad one.
I typed in "20A ESC" in eBay search and found one in the USA as an example. Here is the link! Hope it helps! If you need any help please contact myself, or the great guy who posted this video!
😊
rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F332357822669
@@potatopower4026 well there are several types of esc available like 20A , 30A, 320A, what's the difference between them?
hi how many afhds systems can work together without interference
I am afraid I have no idea so I would suggest you register on something like the FliteTest forum and ask that question as you are more likely to get an informed response there than people just guessing an answer here. A Google search just seemed to find people trying to push their own favourite brand with very little background detail to prove their claims.
I bought my receiver and plugged my motor, servo, and power. She ran fine for about five minutes then, poof. Nothing! I felt the back of the receiver and it got incredibly hot. Now if I apply any power, nothing else, it starts to get hot.
Can you help me?
Probably too late now. What power did you use? This type of receiver is usually rated at 5 volts and takes the power from your ESC or BEC.
GrandadIsAnOldMan
I was using a 5VDC regulated power supply set at 300mAh
That should have been fine. If you bought it from a reputable dealer I would try to get you money back or a replacement. Not so easy if it was an eBay seller but still worth contacting them.
Great guy man this helped me in india im making a corsair
Good luck, don't forget to post a video of it flying 👍
@@GrandadIsAnOldMan of course i will on my UA-cam channel if you want i can update you on the progress i have made over the month it will also be on my UA-cam channel.
New receiver can use old original remote controller ?? Help me please :-)
If it is a FlySky transmitter then it should bind to the FlySky receiver following the standard procedures
can i use a flysky reciever with the austar transmitter
Can't help you there, I have no experience with Austar. Does it use AFHDS protocol? I just looked at a listing for an Austar RC on AliExpress and it does say AFHDS but I suspect it WILL NOT work. I seem to remember the FlySky AFHDS was it's own version. Looking at the picture of the Austar on BangGood it looks identical to an unbranded transmitter I have which DOES NOT work with FlySky receivers. If you get an answer from somebody, I would love to know as those Austar RCs look pretty cheap so might be handy.
what transmitter do you use?
+Calel14 I use FlySky FS-T4B and FlySky FS-CT6B transmitters
@@GrandadIsAnOldMan does this reciever works with every 2.4 GHz tx?
@@jatinmali9310 it works with FlySky RC gear. You would have to read the spec and check if it is compatible with whatever transmitter you have. There are many different transmission specs and NO all 2.4 GHz systems are NOT the same.
Recently received a TX with 2 of these RXes. I hope to get back into 1/10th buggy racing once the clubs are allowed to re-open. Rock crawling is fun, but I do like to zoom round a track. Heh, yes, and then there's all my gliders that I need to crash! . . . 🛬
Hey buddy, long time. Thanks for dropping by. Yes the FlySky range are (or were) a cheap range that have always worked for me. Recently the eBay prices from China have effectively doubled for items like this, probably still cheap but not as cheap as they were.
@@GrandadIsAnOldMan Yeah, I decided on this Flysky as it's 3 channel, but it wasn't in stock at any UK shops, still £50 on Ebay though! 🙄
You're right they don't work for aircraft and my glider did crash after launching all the high start but it was EPP Pecans I didn't trust it It must have bounce 6' back up here hitting straight down..3gs rec
@truth409 Surely you would have done a basic range check before launching your glider?
@@GrandadIsAnOldMan Don't call me Shirley!
I am 11 year old ,your video gives me hope to fly.
I am learning and doing all it takes to fly my plane .
Have a WLtoy F959 transmittor and fly sky reciever FS-IA6B,
How can I make it work,I am stuggling. Kindly guide me ,I hope to hear constructive tips,suggestions & feedback from you and others .
I am afraid I haven't used the FS-IA6B but I understand it is backwards compatible with the older FlySky receivers and in that case you should be able to bind it with the F959. Unfortunately as I don't have one, I cannot give you a video. I did several videos using the WL-V911 receiver and FlySky transmitters and the principle should be the same. Here is one of the videos ua-cam.com/video/vX-ovUMPIkw/v-deo.html
If the motor es dead the reicever dont work?? My boat ESC was beeping i tasted with a new one and same thing and the receiver dont show the ligth on , i change the reicever and same issue , i cant binded bacause dont turn on , some one told me that the motor is dead and thats the reason the reaceiver dont como on , what do you think
Try disconnecting the motor and just try it with the steering? If the steering works then it was the motor (or ESC). Try each of the channels connected to the steering. You could power the receiver with a single cell battery to see if it works without the ESC.
@@GrandadIsAnOldMan all are new parts , the esc flashing , reicever new nothing ,i tried banded but nothing
@@nossrc5638 first step - disconnect everything from the receiver. Next connect a single cell battery (3.7 volts) direct to the receiver. Make sure you have + and - the right way round. Does the light flash on the receiver?
@@GrandadIsAnOldMan im gonna check that now
@@GrandadIsAnOldMan the codes beep in the manual says that one beep per second is to low voltage or to higth voltage , the reicever turn on both of them im getting crazy
Now I'm confused i bought a new receiver and the bind says channel 3 iv tried everything and it won't bind iv connected the seller and he said look at the listing so i did and it says too bind use VCC not channel 3 iv not tried it yet I'm just trying to get help cos it says bind is 3?
Yes, channel 3 is the one used for the bind plug on this receiver. In the video description I have written down the step by step guide. Make sure you switch both the receiver and the transmitter OFF as specified in the sequence.
@@GrandadIsAnOldManOK thanks mate I'll give that a go tomorrow and let you know how it goes thank you.
Good luck 👍🏻👍🏻@@LOVE2RC
@@GrandadIsAnOldMan all sorted mate thank you.
@@LOVE2RC great, I hope you get some fun with it 👍
Thank you!
I hope it helped 😊👍
Could you make a video on esc and connecting a 4 channel reciever by any chance
I don't see what you need a video for, maybe I misunderstand your question. You plug the ESC into the receiver. It will have the right sort of plug to fit. It will also have a plug for the battery and another plug for the motor. They are all different shaped plugs so they cannot be mistaken. It will probably have an on/off switch too. You choose which channel you want to plug it into depending on what you are using it for. For more detailed information I can recommend FliteTest RC Planes - beginners series ua-cam.com/play/PL6IuSFWz4ktvupu_gxw1vn-sjBGOkJFHV.html
Interesting. I have the same receiver, it says it is bind but nothing happens with controls. Nothing at all...
That is odd, I have lots of these and have had no trouble.
GrandadIsAnOldMan maybe this was a bad one, I ordered a few more to figure out... apparently shipping will take long so my car won't go anywhere in two more weeks. Already been out of order for 6 weeks now. Waiting for components and parts is boring.
Sir my receiver ,3 servos not working but the brushless motor is working sir
Can u explain any method to repair it sir and what the problem is
Short answer, no. If your ESC is controlling your brushless motor OK, does the ESC work plugged into the other channels? That way you will know if it is the servos that are faulty or the receiver.
@@GrandadIsAnOldMan no sir esc doesn't worked while pluging into other channels, it produces long beep sounds for other channels .esc is working only in
Channel 3 sir for FSR6B receiver
Does this work with a 7.2 volt battery?
Like the majority of Hobby Grade receivers it is designed to work on 5 volts. You connect your battery to an ESC or a BEC and they provide the correct output to power your receiver. If your ESC (Electronic Speed Control) has the built in BEC circuitry then it will supply the correct voltage to the receiver. A battery eliminator circuit (BEC) is an electronic circuit designed to deliver electrical power to other circuitry without the need for multiple batteries. Most ESCs have this facility but read it's specification to be sure. That means that if the ESC is designed to handle a 6S LiPo battery (23v) but it is equipped with a BEC it would still deliver the 5 volts to the receiver. If your battery is 7.2 volts then you need a 2S ESC or BEC.
I strongly recommend you watch the FliteTest RC Planes - beginners series. There are a couple of episodes covering the power and control systems ua-cam.com/play/PL6IuSFWz4ktvupu_gxw1vn-sjBGOkJFHV.html
what thing you connect with battery
The component between the battery and the RC receiver is called an ESC (electronic speed controller). If you want to know more about radio control and the components I strongly recommend the FliteTest RC Planes - beginners series ua-cam.com/play/PL6IuSFWz4ktvupu_gxw1vn-sjBGOkJFHV.html
can i use this on my redcat blackout xte pro
I don't have a clue, never heard of it. I would suggest going on to the FlySky site and asking directly. Do you know what protocols your transmitter uses?
Has anyone had problems with the range on these ? I use my cars on a basketball court and it loses range around 150 feet
Are you doing anything with the aerial?
Hiya... With these older ones make sure in your transmitter you change from default AFHDS 2 to AFHDS for these receivers. Its commonly a problem with these but that should fix it. Great range with these out to 1500m in the air and 500m over ground using a cheap Flysky i6X Radio. Just change the 2 protocol and your good to go.
I thank you so so much as I did not know what the motherboard for an RC was called I literally spent a week researching on it
I am glad it helped you 👍 You will find plenty of good advice for RC gear on the FliteTest channel. They have a beginners series - FliteTest RC Planes - beginners series ua-cam.com/play/PL6IuSFWz4ktvupu_gxw1vn-sjBGOkJFHV.html
Is it broken if my receiver doesnt light up?
With no power you will get no LED.
With power and no signal you should get a slow flashing LED.
With power and good signal you should get constant glow LED.
Check your power is connected right before assuming the receiver is faulty.
I have just done this video for you ua-cam.com/video/eFq7LSZlXqo/v-deo.html
What voltage do these receivers use ?
Here is the link to the Manufacturers description www.flysky-cn.com/gr3e-canshu it says 4.0 to 6.5 volts. If you are using a standard RC ESC to control your motor it probably supplies the correct voltage to the receiver. The ESC (Electronic Speed Controller) supplies the power to the motor and usually has a BEC (Battery Eliminator Circuit) included in its design to ensure 5 volts is supplied to the receiver, regardless of what voltage it is supplying to the motor. If you are interested in Radio Control I recommend watching the FliteTest RC Planes - beginners series ua-cam.com/play/PL6IuSFWz4ktvupu_gxw1vn-sjBGOkJFHV.html They talk about everything required for RC on aircraft but most of it also applies to cars and boats.
@@GrandadIsAnOldMan Thankyou .
Im a noobie here. How do people connect live camera feeds to this and use the same antenna?
@IeuanBevan. Short answer, "You don't." If you are thinking FPV, you will find that uses a separate rc signalling board. You might link to this receiver just to get a battery feed, but you won't be sending any video signal through it.
@GrandadIsAnOldMan ah right okay that makes complete sense now haha thanks alot!
I want to build a big rolling platform, can understand how you make FPV video very long range with a home station however would you know how you can make an RC work super long range? At least a mile range?
Any sort of special receiver or home station?
A reciver which can control a 12v dc moter, as well as some additional optional add ons.
@IeuanBevan. there are all sorts of regulations covering long-range FPV, so I would suggest researching the regulations before spending any money. It probably depends on which country you live in.
@GrandadIsAnOldMan last question haha, trying to understand also.
You know how alot of long range drones have Gimbal with 2 Metal Servos. (Moving cameras)
How do those moters get controlled by the same antenna on a drone to the same transmitter and still are able to be controlled super duper long range?
Such as the parrot Anafia drone?
Each servo will be controlled by a different channel on you RC gear. On some systems they even have motion sensors set into your FPV headset so the gimbals react to movements of your head. As far as the radio gear is concerned it is just another signal sent on another channel. Going back to the start of this thread, you are commenting on a 3 channel RC receiver. That means this receiver can only control 3 things, such as throttle, elevator, and rudder. What you are talking about is way beyond the capabilities of this receiver. On the subject of long range FPV you might find the Traxxalu channel interesting www.youtube.com/@Traxxalu-en9lz
Cool!!
Does it bind with fly fi6
I don't have an i6 but this video show you how to do it ua-cam.com/video/NR2pJMo3lYQ/v-deo.html if you check the FS-I6 manual it tells you on section 8.1 which receivers are AFHDS and which are AFHDS-2A
Rc battery and Rc Nitro can use same remote ???
Why would there be a difference?
Just to be sure if i purchase new radio control can support My Rc .
It will work with both nitro and electric I run these on all my vehicles
where did you get it...???
It came from eBay but I am sure many similar online shops sell them. Information in the video description.
what battery do you use?
The power feed to the receiver is via the ESC and that supplies the correct voltage regardless of the battery used. That particular battery is a VKS 2S 1200mAh 20C LiPo battery
@@GrandadIsAnOldMan thank you
@@GrandadIsAnOldMan what ESC is that?
@@Davis-tl1rc this video is over 2 years old but that type of ESC is fairly generic. I had a quick look on eBay for you and this looks like the same one www.ebay.co.uk/itm/232742004939
Is the receiver very lite ?
+Bao Khang Kelvin I put it on my scales and it says 7g but here are the details from the eBay listing ---
size:35.5 x 22 x 13mm
Ant length :180mm
Color : Black
Net Weight:2g
Package weight:8g
+Bao Khang Kelvin There seems to be a problem with UA-cam comments. I think this is my second reply to you but the first one is not showing.
I put it on my scales and it says 7g but here are the details from the eBay listing.
size:35.5 x 22 x 13mm
Ant lenght :180mm
Color : Black
Net Weight:2g
Package weight:8g
+Bao Khang Kelvin There seems to be a problem with UA-cam comments. I think this is my second reply to you but the first one is not showing.
I put it on my scales and it says 7g but here are the details from the eBay listing.
size:35.5 x 22 x 13mm
Ant lenght :180mm
Color : Black
Net Weight:2g
Package weight:8g
+Bao Khang Kelvin There seems to be a problem with UA-cam comments. I think this is my second reply to you but the first one is not showing.
I put it on my scales and it says 7g but here are the details from the eBay listing.
size:35.5 x 22 x 13mm
Ant lenght :180mm
Color : Black
Net Weight:2g
Package weight:8g
+GrandadIsAnOldMan You have replied 4 times in total(on my screen to him). I had the same issue with the youtube mobile app. so i deleated my extra comments.
Can I bind with flysky fs16 transmitter
Sorry I can't help you there, I don't have the fsi6. I would suggest checking out one of the RC forums. I doubt it will work.
Hi Randomstuff. I just had the same problem, I wanted to use this receiver in a small glider, and this was all that would fit. At first I couldn't bind it to my fs16, so I did some research. This reciever is on system AFHDS, wheras the fs16 is on AFHDS 2A. No worries, you can select the right system in the menu, and all will bind just as it should. In AFHDS you don't get the two way connection, ie the Rx voltage displayed on the transmitter display, but that's a small price to pay.
Hey please someone please tell me I have f949 reciver and transmitter if use this 3'ch receiver how can I control my coreless motor please someone tell me
You would probably do better just buying a new F949 receiver. It has all you need onboard. If you get a receiver like this FlySky one you would also need to buy servos which you would have to fit somewhere else on your plane. To control your motor you would need to buy an ESC.
GrandadIsAnOldMan ok thanks for replying maybe I should buy new f939 receiver but the problem is that servo motor on f939 are very small and lift very less as compared g90 servos I have spent so much money on buying transmitter receiver motors propellers but nothing is actually build only because of receiver and servo thanks for the reply
GrandadIsAnOldMan can you tell me please that f949 transmitter can connect with flysky receiver and servo ?
There is no point in buying the F949 if you are not going to use the onboard servos. You can buy a FlySky receiver cheaper and the normal servos will plug straight in
GrandadIsAnOldMan will f949 transmitter connect with flysky receiver ?
yes you can recreate it. just set failsafe to full throttle first. so hold the stick in full throttle with the prop spinning. and while it is spinning you have to push the button on the rceiver and hold it. it will start blinking for 2 seconds or so and then it will stay on again. now let go of the button. ready fail safe is reprogrammed to full throttle when you loose signal. so if you let go of the stick the prop will stop again. switch off the transmitter and the prop will start spinning full throttle again. o.m.g. we have a problem. well to solve this you can set the fail safe and it works like this bla bla bla and you can show how to solve it again.
Thanks Eric. You would think they could include that information with the receiver. It only needs them to photocopy a bit of paper and include it in the package 😊
I guess that is the downside of all the very low prices we get from China. Me myself use these receivers for some years now and just last month i discovered the meaning of this fail safe button. I never understood why it was there
It didn't work in my aircraft that was made of epp and goodness...Crashed
These 3ch re3ceivers are really intended for cars, so I don't think they have the same range as the other receivers, however, they still work if you are flying reasonably close, such as park flying.
Is the receiver waterproof thanks 👍
They are not sold as "waterproof". I have got them wet a few times and they have survived and I did open one up and give it a good coating of nail varnish when I knew I was going to be using it in a boat that was likely to get very wet. Here is the video of that bit ua-cam.com/video/I5v4u4gGr3Q/v-deo.html
👍🏻👍🏻👍🏻👍🏻🚤🚤🚤🚤🚤 that's cool
+Trevor Bott thanks Trevor :)
I did what you do and the receiver burnt out
Obviously you did something wrong. Most likely connected the wrong size battery or reversed the polarity. Did you connect a battery direct or did you use an ESC as shown?
Make a RC Igniter for Fireworks plsssss
+multraslan19o5 you might like this video ua-cam.com/video/thhPO8gA8GQ/v-deo.html I used it as reference for RC switching.
This video by KipKay shows a simple remote controlled ignition system ua-cam.com/video/nJQ3IRr7Eck/v-deo.html
Here is simple RC version by Jacob Raab ua-cam.com/video/onBQVlAlJ0c/v-deo.html
TheFreddyPlayer the receivers that came with my FlySky FS-T4B and FlySky FS-CT6B transmitters were both 6 channel. This one is 3 channel and is just a little cheaper
+TheFreddyPlayer the battery and the esc should be chosen based on what motor you are intending to use. I suggest you look at a channel like FliteTest to get information from people who know what they are talking about. Their beginners series covers all the basics ua-cam.com/play/PL6IuSFWz4ktvupu_gxw1vn-sjBGOkJFHV.html If you look at my videos I give the details of the components I use in the video descriptions.
for 4 or 5 dollars you buy an esc without a brake. you do not need a break on the boat. it is only anoying.
That's right, you will find other videos on my channel with "brakeless" ESCs, I don't see any benefit on planes either. I have read some discussions on the RC forums but none of them convinced me. The only place I can see a benefit is on some RC cars where you are worried about messing up the gearbox by throwing it straight into reverse.
Well it is true it is mainly for cars. but it can be more important then you think. when you are racing an rc car down a track it sometimes is necessary to brake when reaching a sharp bent in the track. throwing it into reverse will make it spin out of control. the brake function is proportional so very useful. also when driving a crawler it is very useful to have a brake. now you can descent slowly down a steep part instead of just race down. rc crawling is about control and slow movement
@@GrandadIsAnOldMan what esc did you use for this??
@@samiamcas the esc is related to the motor and battery you choose, not the receiver.
How much please
I suggest you go online and search for them. The prices vary depending on the seller. eBay and AliExpress are often the cheapest sites although I trust AliExpress less than eBay.
Can u help me
I have no idea, what is your problem?
GrandadIsAnOldMan I’ve tried to bind my electronics that are the exact same reviver and controller and I did not bind and kept flashing with the ref light
@@chally2mbt12 in my video description there are links to other people's videos on binding these receivers if my video was not clear enough. The only point I would make is - press and hold the bind button before you switch on the transmitter and release the bind button after the transmitter is on.
The sequence I followed was switch OFF receiver and transmitter
Check you know where the BIND plug should go on the receiver
Insert BIND plug in the BIND position on the receiver (still switched OFF)
Press and hold the BIND button on the transmitter
With your finger STILL on the BIND button, switch on the transmitter
Take your finger off the BIND button
Now switch ON the receiver
The light should go steady
Switch OFF the receiver
Switch OFF the transmitter
REMOVE the BIND plug from the receiver
Switch ON the transmitter
Switch ON the receiver
They should now be working
Is 4ch what
www.flysky-cn.com/gr3e-canshu
Salut, je me nomme Touré-saidou, je suis africain,
Je suis un grand inventeur, j'aime bien l'invention, je suis de la Côte d'ivoire, j'essaie de fabriquer des tout petits hélicoptere, et des petits avions, mais pour instant j'ai problème d'occupement, c'est-ta-dire je ne sais pas comment avoir les produits donc j'aurais besoin pour realiser mon projét,
Je suis vraiment quelqu'un de grant esprit, et j'aimerais bien avoir de l'aide en sort que je puisse aller de l'avant
Je vous remercie, merci aussi de me repondre ?
If you have not seen them already I can recommend FliteTest RC Planes - beginners series ua-cam.com/play/PL6IuSFWz4ktvupu_gxw1vn-sjBGOkJFHV.html
Brilliant... is this a how to use the wrong radio for your model, and how to take 5 times longer than it should to bind your receiver. I'd leave the vid's to the pro's mate... 😂
Perhaps you could take the time to make a video of your own to show us how to do it
@@GrandadIsAnOldMan No thanks, i'd recomend to follow the instructions given on there website.
You are also using an air transmitter when you need to use a land/water transmitter. They self centre the throttle so you can actually use the model properly.
Haha, brilliant reply for somebody who cannot be bothered to back up their comment with a demonstration. I accept I am no RC expert but I do know how the transmitter works. You obviously know that for a mode 2 transmitter the left stick auto centres horizontally but not vertically and the right stick auto centres in both orientations. This suits my style of boat, car and aircraft flying. On many of my boats I use two motors with differential thrust for the steering controlled by the left and right stick. For most of the time I would set the left stick as the main speed control and the right stick would then provide the steering by varying the speed in relation to the left stick. The issue with the brake on the ESC is not a problem if I am using the right type of ESC for a boat or aircraft (no brake required) but is always a problem with this particular type of ESC with a very basic brake and no programmable features and the FlySky FST4B transmitter as it does not give the full throws required to activate and deactivate the brake effectively. A simple hazard when buying the cheapest of the cheap RC component parts. You will find I have demonstrated this in another video and for the record I do have a few "Pistol Grip" style transmitters including one I bought specifically to test out these cheap "brake" type ESCs.
Failsafe is for nitro and petrol rc cars.
With some ESCs if you lose the signal they go to full throttle. The failsafe prevents that. That doesn't differentiate between cars, boats, or planes. It is an ESC 'feature'.
@@GrandadIsAnOldMan I have only ever had run aways with my older nitro a d petrol ground rc... never once has any of my brushed or brushless set ups run away if signal ic lost. They just stop.
@@brenthumphreys5747 yes, like I said, it is a "feature" of some ESCs, not all of them. I have only noticed it a couple of times and until you commented on this old video I had forgotten about it entirely.
BRAZIL
80310r
Help
Is the answer to your question already in the video description?