Glad it work. With the current promotion, you can get a domain for 3 years with only $14 and configure DDNS. This is much more cheaper than no-ip fee for only 1 year.
I have follow till 9:42, I couldn't ping the public IP. Request timed out. Packets lost 100%. What is the reason? Maybe my ISP modem not in Bridge mode, as I can see if WAN has different IP with my LAN gateway( WAN)
This was brilliant. It's the next thing I need to do in setting up my OpenWrt. How about a video on making OpenWrt backups? How do you make yours? Settings, packages list and a full sd card backup for instance.
My home network is plug and play (I don't have a lot of custom configurations, except for the root & wifi password); therefore, I never perform a backup. The other routers are for making the video and as you can see, I have no reason to back them up. However, backup and restore is very simple. Login to LuCI → System → Backup / Flash Firmware, here you will find the option to backup the setting and restore it. More information is available here: openwrt.org/docs/guide-user/troubleshooting/backup_restore To fully backup an SD card, you will need a host device, such as PC/Laptop and the the free disk space at least equal to the size of the SD card, which we don't usually do in daily usage. However, we do have NOR and NAND backup, which is not simple at all and I think once you are ready for advance stuff, you will learn it on your own. openwrt.org/docs/guide-user/installation/generic.backup
My openwrt routers(2unit, both set as dumb AP) is behind main router. So, would be glad to see guide on the said URL in advanced setting. Cos I couldnt opkg update any packages.
If the router/ap is configured as a LAN device/static IP address, you will need to set the gateway (which is your router) and DNS server before you can run opkg update. You can configure this on the LAN interface.
HI bro, tiếng anh nghe giống người hàn quốc quá. Mình hỏi xíu, mình đang xài mwan3 load 2 đường line FPT, VNPT. Vậy giờ muốn dùng đnsclient này để update wan ip cho cả 2 router phía trước có được không. Cảm ơn bạn
So I wanted to add it in a tplink router, but they only support noip and diydns, so I guess namecheap will not work right? We need to select the client as namecheap, but since it's not added there, so I guess it will not work.
I am trying to update my personal hostname with no-ip (registered with no-ip). Configuration looks okay. I am getting following response from NO-IP: ERROR : IP update not accepted by DDNS Provider. What do you think?
@@VanTechCorner Nope it is not helping. I realized my update_no-ip_com.sh is using /usr/bin/wget-ssl to update a dummy IP --> answering nochg with correct IP address, after that sending real IP to noip.com: no-ip.com answered: nohost I am confused....
In the video there is one section to update the IP via the browser, can you try my guide instead of the sh file. Btw, how is your public IP look like? (You can remove the last 3 characters)
@@VanTechCorner ~my browser return no change~ , it's OK until I see …080702 ERROR: No or private or invalid IP 'x.x.x.x' given!…ERROR: No update send to DDNS provider. 🤔 need to get an IP from my ISP?
Thank you for this great tutorial, just what I needed. I am trying to setup my ddns to remotely wake up my PC over wan. Question: why did you change your public IP to 1.1.1.1, wouldn't it be updated to 9.9.9.9 anyway when you make the change?
From where I can grab that URL. BTW, thank you for showing me how to add a namecheap's domain. I brought it a few days ago to manage this issue. EDIT: Got the URL. Thanks
![[No Dependencies] Namecheap - How to Setup a FREE DDNS Script (self contained)](http://i.ytimg.com/vi/9Wd2a_69QIw/mqdefault.jpg)
Thank you so much for this wonderful tutorial! It helps me a lot!
very useful for namecheap. I am spending all aftenoon on it. this video helps a lot! THS!
Glad it work. With the current promotion, you can get a domain for 3 years with only $14 and configure DDNS. This is much more cheaper than no-ip fee for only 1 year.
I have follow till 9:42, I couldn't ping the public IP. Request timed out. Packets lost 100%. What is the reason? Maybe my ISP modem not in Bridge mode, as I can see if WAN has different IP with my LAN gateway( WAN)
This was brilliant. It's the next thing I need to do in setting up my OpenWrt. How about a video on making OpenWrt backups? How do you make yours? Settings, packages list and a full sd card backup for instance.
My home network is plug and play (I don't have a lot of custom configurations, except for the root & wifi password); therefore, I never perform a backup. The other routers are for making the video and as you can see, I have no reason to back them up. However, backup and restore is very simple. Login to LuCI → System → Backup / Flash Firmware, here you will find the option to backup the setting and restore it. More information is available here: openwrt.org/docs/guide-user/troubleshooting/backup_restore
To fully backup an SD card, you will need a host device, such as PC/Laptop and the the free disk space at least equal to the size of the SD card, which we don't usually do in daily usage. However, we do have NOR and NAND backup, which is not simple at all and I think once you are ready for advance stuff, you will learn it on your own. openwrt.org/docs/guide-user/installation/generic.backup
compared with ROS system,which one is better to use?
This is excellent thankyou!
My openwrt routers(2unit, both set as dumb AP) is behind main router. So, would be glad to see guide on the said URL in advanced setting. Cos I couldnt opkg update any packages.
If the router/ap is configured as a LAN device/static IP address, you will need to set the gateway (which is your router) and DNS server before you can run opkg update. You can configure this on the LAN interface.
@@VanTechCorner Thank you. Btw, what I should set for my 2nd node (mesh point) gateway and dns? My main router 192.168.3.1 or the 1st mesh-node?
thanks! very nice tutorial
HI bro, tiếng anh nghe giống người hàn quốc quá. Mình hỏi xíu, mình đang xài mwan3 load 2 đường line FPT, VNPT. Vậy giờ muốn dùng đnsclient này để update wan ip cho cả 2 router phía trước có được không. Cảm ơn bạn
Does this support ipv6
So I wanted to add it in a tplink router, but they only support noip and diydns, so I guess namecheap will not work right? We need to select the client as namecheap, but since it's not added there, so I guess it will not work.
With OpenWRT DDNS client, you can use almost every DDNS service provider.
I get sick when my search engine finds these videos
I am trying to update my personal hostname with no-ip (registered with no-ip). Configuration looks okay. I am getting following response from NO-IP: ERROR : IP update not accepted by DDNS Provider. What do you think?
What if you update it with HTTP? Is it working?
@@VanTechCorner Nope it is not helping. I realized my update_no-ip_com.sh is using /usr/bin/wget-ssl to update a dummy IP --> answering nochg with correct IP address, after that sending real IP to noip.com:
no-ip.com answered: nohost
I am confused....
In the video there is one section to update the IP via the browser, can you try my guide instead of the sh file. Btw, how is your public IP look like? (You can remove the last 3 characters)
@@VanTechCorner via browser it is not working either. Logs spit out following: ERROR : IP update not accepted by DDNS Provider
@@VanTechCorner ~my browser return no change~ , it's OK until I see …080702 ERROR: No or private or invalid IP 'x.x.x.x' given!…ERROR: No update send to DDNS provider. 🤔 need to get an IP from my ISP?
Thank you.
chào bạn . mình muốn đặt tên cho những thiết bị kết nối với router thay cho tên mặc định rom openwrt có làm được ko bạn
Tại LuCI, bạn vào System -> System và đổi tên ở mục Hostname nhé.
Finally, Thank you.👍👍, Can you now help with SMB installation😉😉. Thank you once again
By default SMB is allowed in OpenWRT LAN firewall zones. You just need to setup SMB on your PC and it should be able to communicate with each other.
How do I enable ddns for 4G device?
Same. Problem is most 4G network give you a CG NAT address, not a real public IP though
Thank you for this great tutorial, just what I needed. I am trying to setup my ddns to remotely wake up my PC over wan. Question: why did you change your public IP to 1.1.1.1, wouldn't it be updated to 9.9.9.9 anyway when you make the change?
Thanks for tuotial
You're welcome 😊
From where I can grab that URL. BTW, thank you for showing me how to add a namecheap's domain. I brought it a few days ago to manage this issue. EDIT: Got the URL. Thanks
Hey. Please, where did you find that URL?
@@alexander_ladislav you can find it throughout its support help.
thx
please create one for cloudflare
Ohm xem video mới biết bạn là người Việt Nam
Cảm ơn bạn!
bạn la người việt thì bạn có thể làm video tiếng việt được ko