Fantastic Lars very helpful. I loaded the Masso V5.7 firmware today from V5.6 and will be doing the latest settings file from Onefinity tomorrow and,after your video my backed up tools settings from V5.6 so thank you again for pointing this out. As always great video and very informative.👍
Lars, apologies for contacting you through this old post but as you are a Fusion 360 user with your Onefinity Elite Masso could you let me know which post processor you use for Fusion 360 and where to get it. I have posted on many Facebook groups for the Onefinity without any responses and the Onefinity forum just sends you in circles. If you have any links for downloads then that would be very helpful.
@@blakecraig No issues at all, sorry I have been a bit busy today, but I found one on 1Fs community site and modified it to work with the Elite and masso. here is the link to a folder on my Google Drive, it is called onefinity.cps drive.google.com/drive/folders/1NftkuRdDcLaRXCey3tmYKLhkuuJh0HmI?usp=sharing Let me know if you need any other help.
@ Thank you Lars that’s very kind of you to do that for me. I have downloaded the Onefinity.cps file from your Dropbox acct and will install later today. One further question if I may, I have the Elite Journeyman and not the Foreman that you have so will the processor need to be adapted for the difference in bed size or doesn’t it matter, I hope the latter as I would have no idea how to edit the code.
@@blakecraig I just looked through the file and I do not see anything that talks about range for x or Y, so that should be good, just keep you project size smaller that your journeyman. the only code I changed was I added the description to the tool number on like 1551 so I could see it in the G-Code file. I found another set of files. I hope this makes sense go to manufacture click on the 2nd icon in the manage group at the top click on local in the middle at the top click on import find your journeyman.machine file it will say something like post file not found click on the folder then the import button again find the CPS (POST) file click select click close you should be good
Fantastic Lars very helpful. I loaded the Masso V5.7 firmware today from V5.6 and will be doing the latest settings file from Onefinity tomorrow and,after your video my backed up tools settings from V5.6 so thank you again for pointing this out. As always great video and very informative.👍
Thank you so much for commenting! I am glad the video gave you some ideas and will save you from losing your tools set.
Lars, apologies for contacting you through this old post but as you are a Fusion 360 user with your Onefinity Elite Masso could you let me know which post processor you use for Fusion 360 and where to get it. I have posted on many Facebook groups for the Onefinity without any responses and the Onefinity forum just sends you in circles. If you have any links for downloads then that would be very helpful.
@@blakecraig No issues at all, sorry I have been a bit busy today, but I found one on 1Fs community site and modified it to work with the Elite and masso. here is the link to a folder on my Google Drive, it is called onefinity.cps drive.google.com/drive/folders/1NftkuRdDcLaRXCey3tmYKLhkuuJh0HmI?usp=sharing Let me know if you need any other help.
@ Thank you Lars that’s very kind of you to do that for me. I have downloaded the Onefinity.cps file from your Dropbox acct and will install later today. One further question if I may, I have the Elite Journeyman and not the Foreman that you have so will the processor need to be adapted for the difference in bed size or doesn’t it matter, I hope the latter as I would have no idea how to edit the code.
@@blakecraig I just looked through the file and I do not see anything that talks about range for x or Y, so that should be good, just keep you project size smaller that your journeyman. the only code I changed was I added the description to the tool number on like 1551 so I could see it in the G-Code file. I found another set of files.
I hope this makes sense
go to manufacture
click on the 2nd icon in the manage group at the top
click on local
in the middle at the top click on import
find your journeyman.machine file
it will say something like post file not found
click on the folder
then the import button again
find the CPS (POST) file
click select
click close
you should be good