I'm just starting out with the Raspberry pi as a way to expand on the electronics that I have learned over the years and when looking for examples for relays I found your scripts. I've given them a try and I find them very helpful. Thanks.
Nice video :) I actually thought you could be harming the life expectancy of the relays, but went on to check and the number of switches is in the millions. That's the incredible!
Hi pete. My name is Nick. I've been looking for a way to control a machine I've been building for my plasma cutter. I designed and built a relay circuit but it seems pretty bulky. Since I saw your video on relay board controlled by a raspberry pie I just know this would be perfect. Now the only thing I didn't see in the video was how to create a program to integrate contact switches to input to the raspberry pi. What I'm talking about is I need a motor to start. This spins an acme thread. A nut on the acme thread is connected to a sled, runs down on two polished rods that have linear bearings connected to the sled. The sled holds a plasma torch. The function of this machine is to run a plasma torch in a straight line to cut metal. So, turn on the torch, it needs to start the motor, run for a predetermined time, at the end of the cut turn off the torch, stop the motor, return the sled to start position and stop the motor. So if you could make a video on how to control the relays I would greatly appreciate it
Amazing and Lovely, nicely taught ! i tried it and it worked like charm !!! just anyone who wish to use remember to check your ports and remember them,
FYI, in some of the python programs there are missing parenthesis. This causes an error message to populate, and the program will not work until the parenthesis for the print statements are typed. Parenthesis are required for python3.x. Ps. I just got my relay board to work just as your video shows! Thank you for all your help with the tutorial and your python code! I am planning on making a 3000 ft. AGL rocket that is controlled by the pi and the relay switches. And this is using the Pi 3.
Cool video. Can you tell me a. How to connect appliances such as sensors to the relay (not the software, just the circuit)b. How to power the relay with external power.
that is really cool. do you think this can run on the FPP (falcon Christmas player) this would be a great tool used to turn 12v power supplies on and off remotely.
"I'm going to face the metal tabs outwards so if anything goes wrong I can test with my multi meter." Something goes wrong and no multi meter 😖 OCD must be tough to live with
Hi Man! great video. How would you include a GSM Module to this setup? im in process of trying to build this for my off the grid cabin(with solar panels)
So looking at your code examples it looks like these relay boards are active low. I was planning on using one of these boards to operate sprinkler solenoid valves for my garden irrigation with WebIOPi. Do you see any concerns with the pins reverting to an active low state after a reboot...say the power goes out. Don't want my irrigation valves opening unexpected say if I'm away.
Hi, nice video. My 4 channel relay works but for some reason (depending on what GPIO it's plugged into) some of the relay lights illuminate with a dim red color when it starts up. The same as what your first LED does at 5:26. Why is this?
some people say to use a 3/3.3 v relay instead of a 5v relay. Have you noticed the raspberry pi not delivering quite 5v and failing to trigger the relays? I assume this is why the recommend using relays with a lower trigger value
Awesome video! Thank you so much for posting. :) Couple questions: 1) Do I need to have an OS of any kind flashed to the card prior to doing all of this? Or can I put the Python files directly on the SD card, insert it into the Pi, and run it like that? 2) I need a relay to turn on for 1 second every weekday at 8AM (watering a plant, for example). Is there a way to have the relays activate based on time and day, and then repeat all over again? I checked out your Alarm Clock video, but I'm afraid that's way more sophisticated than what I'm looking for.
+J. Siefer You need Raspbian installed. And then to run the python code from wherever you put it inside Raspbian. Check out my Garage Door opener, that runs for .5 seconds. Change it to 1, and then set it on a timer.
7 років тому
Nice tutorial. What Image do you use for the raspberry?
Hello! Can anyone point me in a direction where it shows using this relay with the Raspberry PI being isolated? From my web searching it seems to indicate that power be provided to JD-VCC & GND but the jumper seems to be bridging JD-VCC & VCC and I don't see a separate GND to use when connecting up a separate 5V power supply. I hope someone can shed some light on this. Thanks!
With the 5 and 5a programs, can i connect my garage door to the relay, and would it open and close? Also, can i just set the pi and the relay on a board, or do i need to wall mount it.
Quick question... so I got everything to work, and I made new scripts that are identical to script5 and script5a, the only difference is the pin number. However, whenever I attach electronics (I'm using a lamp that I cut the wire in half) they only work when I touch the two ends of the wires to the center and right metal part. Whether the channel is on or off, the light turns on only with the center and right part. And whether the channel is on or off, the light never turns on when the wires are attached to the center and left part. What might have gone wrong? Maybe a problem with the actual relay? Thank You!
Great video as always . 2 questions...1, in order to connect my laptop via WiFi to the raspberry pi how do you know what the access code of the raspberry pi is. 2, The raspberry Pl 3 uses I believe 3 or 3.3 volts in th GPIO.. Are there 3.3 volt devices like relays etc. Thanks
I’m very new to this. Is that possible to make some nice looking interface to cover the coding, then we can use a touchscreen to make a center control panel in home automation? I wish to use it on my motorhome.
Thanks for the video..all of your videos. I know nothing of python so learning is slow going. question I have is how do you get the scripts to work through the web browser. It was mentioned you have to use php. I have the concept of using Apache but that's it.
Matthew Tratz Yeah check the About section, I tried to make it as easy as poss. The PHP section lists which packages to install, and all you should have to do is copy and paste the php contents and you'll be away (as long as it points to the right place where the file is). Let me know if you hit any snags.
Can you suggest me, which type of wiring should I do to operate mains(lights, fans etc) with relays so that the normal/manual switches also work if raspi system is not online?
depends on the relay, most relays have that info printed on top example if it says 10 A 125VAC it can power a device that uses 110v ac and is about a 1000 Watts. it can also say 10A 28VDC then that is enough for your 12V solenoid valve and less than 120 Watts
Hello, Thank you for your great video tutorial. I try to do/run your examples about open and close some relays but I have some difficulties on closing the ralys. Do you know if I'm doing something wrong? (i'm using the same code as you wroten in script5 and script5a. script5 is working but script5a not). thank you for your answer.
Dragos Florin Stefan From the information you've given me it's very difficult to tell what has gone wrong. I think that you should check if pinList = has the same number on both. Besides that, any further information about the error will help.
sorry for the "silly" question, but can you only access the webpage (for 5 and 5a) from your home wifi? or can you do it from anywhere (eg. your work or friends house)?
Peter Brown Only internally unless you do a lot of configuring (including Port Forwarding on your modem). I intend to do a video to show how this is done soon. But for now, only on your internal network. P
How hard would it be to control off road lights via the app and switches? Thinking of using a pi to control my truck lights. I have used ardiuno boards before and have limited programming skills.
The disadvantage is that the Raspberry Pi needs to boot and shutdown properly, so I would say it would have limited use in a vehicle that doesn't have an "always on" power source.
hey I am totally new to raspberry pi. can you guide me to use raspberry pi to control 4relays using input via switch from the user. and those relays to be also controlled wirelessly by android device via ip using web.
Wasn't your pin layout GPIO.BOARD isn't that the physical pin layout and not BCM layout which is numbered all down both sides and not going across the pins?
@@WayneRigley ok, so choose the script that you want to modify (from my open source examples), and then add it to cron (which is a system level timer). So you can schedule things inside the OS. Like if you want a program (like a diskscan) to run at a time (3AM everyday). So step one, get the script working the way you want it to. Then step two, learn about cron to get the script to run at a specified time.
@@skiwithpete thank you very much for taking the time to respond to me what I'm doing is I have a 12 volt linear actuator which is going to operate my chicken coop door as well as LED lighting inside the chicken coop. this is the reason for me wanting to automate this on my Raspberry Pi 3 B plus I have a 4 channel relay that's going into the mix both the actuator and the LED or 12 volt source. I'm very familiar with how relays work so that's not an issue it's mere getting the script to do what I want or the file I should say. I'll definitely be taking a look at your examples within the hour. Again thank you
So my led turns on and I hear the click, but nothing is coming out. When I hook up a multimeter to it nothing shows. What am I doing wrong? I'm trying to bypass a tactile switch using this.
You can set the relay to be on by default. So if the relays lose power, everything will be switched on. You should control your circuits at the device itself rather than through an existing switch, that way your normal physical switch will still be functional.
can i use this like in my work, i work on chicken houses all over the place, can i take this or say the 8 channel and hook it to my stuff and control it from anywhere in the world and the pi has internet access? how hard would it for a newbie that's not that smart and just getting into this...
Thank you, one thing, i use webpage to light on and off, but if i use the script2.py, i don't know how to stop it from my webpage, can you give a php code for stopping the flashing lights, thank you.
Hi skiwithpete.I am trying a lot here but no luck :( your script 4, can you make that in php wit out count down? just kiip it blink? and a butten there stop the script again?Cheers Jimmy
Hombre, si creaste un video era para que se notaran las cosas, los detalles de conexión de cableado, los pines en el. No colocar una pantalla de pc para verlos ahí.
Hi skiwithpete. I rely like your video and I have get it to work np.I am working on a system for kids can have more fun of cause for free an I am using your script but I am stock on 2 thinks and maybe it will not work :( but I am rely looking for help here. One of the things is wend you push to activate script 5 then I need it to say on another screen that it is on? Can that do it in real live? Hav can I contact you so I maybe can send more info? Cuss I think you are the man for many things to this... Cheers Jimmy
Hello. I don't know why don't stay the rellay on, just couple of seconds ... the relay is 5v 8 relay modules, the jumper is on vcc-jd vcc, conected vcc to pin 2 on 5v, the gnd conected to pin 6, and the gpio on pin 7. I copied your script5.py and I run the program.
How would I go about to switch on and off something using 4 - 5 kilowatt (20 - 25 Amps -220Volts). I could not find a RPi relay that will be able to handle that high Amps but I am sure a plan can be made. Perhaps two stage relay: %v to 30 Volt and a second 24V to 220 volt monster relay able to handle 30 Amps, or ir there an easier way of doing this?
Hey I need help.... My relay board is not working(i cant hear d voice click ) whenever the program is run d light on relay board glows n relay isnt working..... Whats d prblm?
Hi I have tried a number of these and I just can not get the Relay to turn off. Relay turns on using GPO 4 but does not turn off. I have copied the code exactly. The only error is scrit1.py:14: RuntimeWarning: A physical pull up resistor is fitted on this channel! GPIO.setup(i, GPIO.OUT) Can you help?
Hey, really good video! I really hearing about your raspberry pi project. I have new raspberry pi and i am a little bit confused about one line of code: # loop through pins and set mode and state to 'low' for i in pinList: GPIO.setup(i, GPIO.OUT) GPIO.output(i, GPIO.HIGH) thr comment says that the GPIO has to be set to LOW. Then why is the GPIO output set to HIGH ?
Erm. I erm... errr... Because... err... Are you saying I made a mistake? IMPOSSIBLE. Only humans make mistakes! (Well spotted, I've already adjusted the code and reposted it on lpaste - I've recently started a github too, and I'll post it there soon. I noticed another booboo too, but shhhh... don't tell anyone.)
+Alan Green Yes. But that doesn't mean I've figured out how to do it. Just have a text file on one, and the other reading it every so often interval... As a first thought.
Hi, great video and thank you but i am having trouble where if i click on the html file i made and saved the python script is not initiating ? any ideas ? if i run the command through terminal to run the python program it works fine but via the browser, nothing ? is it something to do with the apache server i may be doing wrong ?
dgcompany54 the blue jumper links VCC and JD-VCC. If you want to isolate the relay coil drive voltage from the optocoupler VCC, you will need to drive the node labelled JD-VCC with another 5V supply. In the example in the video, I leave the jumper connected.
Hi, It is nice vedio. Thanks for all effort. I need to write Python Code to control this serial relay control board or amother serial similar cotrol board using my normal serial Comm port on my desktop under Microsoft Windows, I wounder if you have the code or can help n writing it?!. Thanks
i understand you posted it last year but i cant get it working. on pin 2 it is on cant turn it off and on pin 8 it is just off cant turn it on using raspberry pi 3 model b single relay. my relay has +, -, and s i presumed + for 5v, - for ground and s for signal. Hooked it + on pin 2 and - on pin 3. running your script gives Traceback (most recent call last): File "on.py", line 22, in GPIO.output(14, GPIO.LOW) RuntimeError: The GPIO channel has not been set up as an OUTPUT Any help will be appreciated.
your traceback error tells me you have modified the code. unfortunately I don't have enough information to help you. the error you describe with lights staying on makes me wonder in you have the correct optocoupler relay. I suggest you look on Google for more help. thanks
I'm just starting out with the Raspberry pi as a way to expand on the electronics that I have learned over the years and when looking for examples for relays I found your scripts. I've given them a try and I find them very helpful. Thanks.
Nice video :)
I actually thought you could be harming the life expectancy of the relays, but went on to check and the number of switches is in the millions. That's the incredible!
Guilawless nah! Use 'em. I reckon it'd be a badge to honor trying to kill one of these things.
Holy heck man! I've spent DAYS trying to launch my script through a browser. Your code showed me the way. Thank you so much for posting it!
"sudo nano /etc/sudoers
add to bottom of file: www-data ALL=(root) NOPASSWD:ALL"
sudo nano /etc/sudoers
add to bottom of file: www-data ALL=(root) NOPASSWD:ALL"
is this setting has no any effect regarding to security?
thanks heaps. this got my code working.
this allows sudo script access without providing root password.
A couple of days of trying this and that and it all works great.... Many thanks for the guidance
You can almost do a music concert with those relay sounds. I liked that second script.
Very nice scripts. Works perfectly. Now I just want to link it all to the Alexa Echo Dot.
Exactly what i was looking for, my 4 channel relay is on its way. Thanks for posting good video!
Hi pete. My name is Nick. I've been looking for a way to control a machine I've been building for my plasma cutter. I designed and built a relay circuit but it seems pretty bulky. Since I saw your video on relay board controlled by a raspberry pie I just know this would be perfect. Now the only thing I didn't see in the video was how to create a program to integrate contact switches to input to the raspberry pi. What I'm talking about is I need a motor to start. This spins an acme thread. A nut on the acme thread is connected to a sled, runs down on two polished rods that have linear bearings connected to the sled. The sled holds a plasma torch. The function of this machine is to run a plasma torch in a straight line to cut metal. So, turn on the torch, it needs to start the motor, run for a predetermined time, at the end of the cut turn off the torch, stop the motor, return the sled to start position and stop the motor. So if you could make a video on how to control the relays I would greatly appreciate it
I Liked you're video very much,
because its not like i've learnd how to use relay, i also learned how to trubleshoot which is as important! THANKS!
+Tali Biton cool, thanks.
Wow, very nice. Glad you showed the trouble shooting. Hey from TX
...loved the tutorial. I need to do something very similar involving controlling relays remotely, you were an great help to get started. Thanks much!
Did you achieve this , I want some help
Amazing and Lovely, nicely taught ! i tried it and it worked like charm !!! just anyone who wish to use remember to check your ports and remember them,
FYI, in some of the python programs there are missing parenthesis. This causes an error message to populate, and the program will not work until the parenthesis for the print statements are typed. Parenthesis are required for python3.x.
Ps. I just got my relay board to work just as your video shows! Thank you for all your help with the tutorial and your python code! I am planning on making a 3000 ft. AGL rocket that is controlled by the pi and the relay switches. And this is using the Pi 3.
This is great stuff. And better again you never said "uhhhhh ". Most polished
I'm assuming this doesn't need resistors while wiring those jumper cables, correct?
Cool video. Can you tell me a. How to connect appliances such as sensors to the relay (not the software, just the circuit)b. How to power the relay with external power.
Really great video, subscribed definitely. Im going to use a similar design to yours for a switch controlling cold cathode PC case lights.
that is really cool. do you think this can run on the FPP (falcon Christmas player) this would be a great tool used to turn 12v power supplies on and off remotely.
Great work Pete, it worked a treat 1st time. Thanks.
"I'm going to face the metal tabs outwards so if anything goes wrong I can test with my multi meter." Something goes wrong and no multi meter 😖 OCD must be tough to live with
you are a php guy, im sure, i can tell ! proud to be one too ^^
Thanks for this, I have learned a lot from your code in a short time. Do you think it would work as well on a pi zero?
Yes. It will.
got it running first time big step for me thanks again
hi from chile well done thanks
a little tip for your next videos, you can use the Zoom option of your browser for bigger buttons... (just for the video ^^ )
Thanks for sharing (y)
zakaria ellougbi nice tip
ah wires, so simple yet so subtle
Hi Man! great video. How would you include a GSM Module to this setup? im in process of trying to build this for my off the grid cabin(with solar panels)
So looking at your code examples it looks like these relay boards are active low. I was planning on using one of these boards to operate sprinkler solenoid valves for my garden irrigation with WebIOPi. Do you see any concerns with the pins reverting to an active low state after a reboot...say the power goes out. Don't want my irrigation valves opening unexpected say if I'm away.
Thanks for the scripts they helped alote
Awesome..planning to buy one can u please help me with..a video where u can add music to it
The easiest way to control relays is with Arduino. It has bunch of libraries and generally it's easier to manipulate it to suite your application.
Very nice really and I'm using it....but where can I find php section? I'd like to put it in a web browser
Hi, nice video. My 4 channel relay works but for some reason (depending on what GPIO it's plugged into) some of the relay lights illuminate with a dim red color when it starts up. The same as what your first LED does at 5:26. Why is this?
some people say to use a 3/3.3 v relay instead of a 5v relay. Have you noticed the raspberry pi not delivering quite 5v and failing to trigger the relays? I assume this is why the recommend using relays with a lower trigger value
Not a problem with optocoupler relays
Awesome video! Thank you so much for posting. :)
Couple questions:
1) Do I need to have an OS of any kind flashed to the card prior to doing all of this? Or can I put the Python files directly on the SD card, insert it into the Pi, and run it like that?
2) I need a relay to turn on for 1 second every weekday at 8AM (watering a plant, for example). Is there a way to have the relays activate based on time and day, and then repeat all over again? I checked out your Alarm Clock video, but I'm afraid that's way more sophisticated than what I'm looking for.
+J. Siefer You need Raspbian installed. And then to run the python code from wherever you put it inside Raspbian. Check out my Garage Door opener, that runs for .5 seconds. Change it to 1, and then set it on a timer.
Nice tutorial. What Image do you use for the raspberry?
cool video, will use information for university :)
Hello! Can anyone point me in a direction where it shows using this relay with the Raspberry PI being isolated? From my web searching it seems to indicate that power be provided to JD-VCC & GND but the jumper seems to be bridging JD-VCC & VCC and I don't see a separate GND to use when connecting up a separate 5V power supply. I hope someone can shed some light on this. Thanks!
With the 5 and 5a programs, can i connect my garage door to the relay, and would it open and close? Also, can i just set the pi and the relay on a board, or do i need to wall mount it.
Thank you very much, I helped me a lot. Keep it up.
Windows has built in SSH from 2016 in command prompt
Great to know! Thanks
Thanks man, I bought you a coffee!
Nice tutorial very clear!
great video for learning , thanks
Quick question... so I got everything to work, and I made new scripts that are identical to script5 and script5a, the only difference is the pin number. However, whenever I attach electronics (I'm using a lamp that I cut the wire in half) they only work when I touch the two ends of the wires to the center and right metal part. Whether the channel is on or off, the light turns on only with the center and right part. And whether the channel is on or off, the light never turns on when the wires are attached to the center and left part. What might have gone wrong? Maybe a problem with the actual relay? Thank You!
Great video as always . 2 questions...1, in order to connect my laptop via WiFi to the raspberry pi how do you know what the access code of the raspberry pi is. 2, The raspberry Pl 3 uses I believe 3 or 3.3 volts in th GPIO.. Are there 3.3 volt devices like relays etc.
Thanks
Thank pete, this video help me
I’m very new to this. Is that possible to make some nice looking interface to cover the coding, then we can use a touchscreen to make a center control panel in home automation? I wish to use it on my motorhome.
github.com/skiwithpete/sesamepi is the code for this: ua-cam.com/video/p2abZ90-eU0/v-deo.html yeah, you can control the relays on a web page.
Everything is working fine but only the web part not im using the pi 3 and google chrome
you ever use xlights to control your relay boards
Awesome video, thank you for sharing.
do you have a corrected script 1?
Thanks for the video..all of your videos. I know nothing of python so learning is slow going.
question I have is how do you get the scripts to work through the web browser. It was mentioned you have to use php. I have the concept of using Apache but that's it.
Matthew Tratz Yeah check the About section, I tried to make it as easy as poss. The PHP section lists which packages to install, and all you should have to do is copy and paste the php contents and you'll be away (as long as it points to the right place where the file is). Let me know if you hit any snags.
Just figured that the directory where python script resides must have CHMOD set to 777. Now everything works fine.
Can you suggest me, which type of wiring should I do to operate mains(lights, fans etc) with relays so that the normal/manual switches also work if raspi system is not online?
+Sahil Harit Don't play with mains!
but I'm up for home automaton, that's why I'm asking!!!
+skiwithpete ok... thanks!
Is it possible to hook pir up with these codes? Woukd it be hard to do? I'm new with the pi
is it dangerous to use relay module for controlling extending cable coming from mains electric???
Hey, I'm new to all of this so sorry if this isn't a great question, but is the this configuration enough to power a 110v AC or 12V DC solenoid valve?
depends on the relay, most relays have that info printed on top
example if it says 10 A 125VAC it can power a device that uses 110v ac and is about a 1000 Watts.
it can also say 10A 28VDC then that is enough for your 12V solenoid valve and less than 120 Watts
Hello, Thank you for your great video tutorial.
I try to do/run your examples about open and close some relays but I have some difficulties on closing the ralys. Do you know if I'm doing something wrong? (i'm using the same code as you wroten in script5 and script5a. script5 is working but script5a not).
thank you for your answer.
Dragos Florin Stefan From the information you've given me it's very difficult to tell what has gone wrong. I think that you should check if pinList = has the same number on both. Besides that, any further information about the error will help.
skiwithpete well... I can Open the relays but I can't close them. script5 is working, script 5a not working. :))
Dragos Florin Stefan are there any error messages? what is does the line with PinList say on both scripts?
sorry for the "silly" question, but can you only access the webpage (for 5 and 5a) from your home wifi? or can you do it from anywhere (eg. your work or friends house)?
Peter Brown Only internally unless you do a lot of configuring (including Port Forwarding on your modem). I intend to do a video to show how this is done soon. But for now, only on your internal network. P
How hard would it be to control off road lights via the app and switches? Thinking of using a pi to control my truck lights. I have used ardiuno boards before and have limited programming skills.
The disadvantage is that the Raspberry Pi needs to boot and shutdown properly, so I would say it would have limited use in a vehicle that doesn't have an "always on" power source.
hey I am totally new to raspberry pi. can you guide me to use raspberry pi to control 4relays using input via switch from the user. and those relays to be also controlled wirelessly by android device via ip using web.
Great video
Wasn't your pin layout GPIO.BOARD isn't that the physical pin layout and not BCM layout which is numbered all down both sides and not going across the pins?
im new to this, how do you program an android app to control a relay via raspberry access point or bluetooth?
Any way you can show how to make a script for turning a relay on and off for a specific time every day
I would do that through cron, running the script. Rather than in the script.
@@skiwithpete ya no idea on this stuff.. I'm new to the coding side
@@WayneRigley ok, so choose the script that you want to modify (from my open source examples), and then add it to cron (which is a system level timer). So you can schedule things inside the OS. Like if you want a program (like a diskscan) to run at a time (3AM everyday).
So step one, get the script working the way you want it to.
Then step two, learn about cron to get the script to run at a specified time.
@@skiwithpete thank you very much for taking the time to respond to me what I'm doing is I have a 12 volt linear actuator which is going to operate my chicken coop door as well as LED lighting inside the chicken coop. this is the reason for me wanting to automate this on my Raspberry Pi 3 B plus I have a 4 channel relay that's going into the mix both the actuator and the LED or 12 volt source. I'm very familiar with how relays work so that's not an issue it's mere getting the script to do what I want or the file I should say. I'll definitely be taking a look at your examples within the hour. Again thank you
hi, could u please teach without Rasberry, how to use dc relay ?
So my led turns on and I hear the click, but nothing is coming out. When I hook up a multimeter to it nothing shows. What am I doing wrong? I'm trying to bypass a tactile switch using this.
Can you share some thing controlling the 4/8 channel or relay () using Intel Edition for automation
Ravi Ratan Singh I don't understand your question. The source code is in the About Section. What's that about Intel Edition?
Hello, quick question. If you put this up on your lights at home...and somehow the pi is broken, how can you manually switch on and off the lights?
You can set the relay to be on by default. So if the relays lose power, everything will be switched on. You should control your circuits at the device itself rather than through an existing switch, that way your normal physical switch will still be functional.
can i use this like in my work, i work on chicken houses all over the place, can i take this or say the 8 channel and hook it to my stuff and control it from anywhere in the world and the pi has internet access? how hard would it for a newbie that's not that smart and just getting into this...
Great work big THX
found the scripts but how do i get them to run i paisted them into terminal but can't get the to run
total new ti raspberry pi and code
+Mark Kerr I'm pretty sure I show that in the video... if not, watch this one: ua-cam.com/video/TFt480sxNWg/v-deo.html
i have tried this project but i ve gotten stuck, i do manage to turn the relay on but i cant seem to make the relay turn off. could you help?
Thank you, one thing, i use webpage to light on and off, but if i use the script2.py, i don't know how to stop it from my webpage, can you give a php code for stopping the flashing lights, thank you.
Hi skiwithpete.I am trying a lot here but no luck :( your script 4, can you make that in php wit out count down? just kiip it blink? and a butten there stop the script again?Cheers Jimmy
Any one maybe?
can u suggest good relay board make.?
Hombre, si creaste un video era para que se notaran las cosas, los detalles de conexión de cableado, los pines en el. No colocar una pantalla de pc para verlos ahí.
Hi skiwithpete. I rely like your video and I have get it to work np.I am working on a system for kids can have more fun of cause for free an I am using your script but I am stock on 2 thinks and maybe it will not work :( but I am rely looking for help here. One of the things is wend you push to activate script 5 then I need it to say on another screen that it is on? Can that do it in real live? Hav can I contact you so I maybe can send more info? Cuss I think you are the man for many things to this... Cheers Jimmy
Hello. I don't know why don't stay the rellay on, just couple of seconds ... the relay is 5v 8 relay modules, the jumper is on vcc-jd vcc, conected vcc to pin 2 on 5v, the gnd conected to pin 6, and the gpio on pin 7. I copied your script5.py and I run the program.
Thank you for the skip ahead shorcuts. Attention to those details in a video matter a lot.
How would I go about to switch on and off something using 4 - 5 kilowatt (20 - 25 Amps -220Volts).
I could not find a RPi relay that will be able to handle that high Amps but I am sure a plan can be made.
Perhaps two stage relay: %v to 30 Volt and a second 24V to 220 volt monster relay able to handle 30 Amps, or ir there an easier way of doing this?
Frits, why not use a SSR (Solid State Relay)? What did you use?
Hi, very good video, How to run python script with web browser?
why my relay Module is working inverted. Relay get activated when input signal to relay is Low.
Very intersting..Can you show the code in Python as an example
Konstantinos Mavros yes, it is in the video description.
Hey
I need help.... My relay board is not working(i cant hear d voice click ) whenever the program is run d light on relay board glows n relay isnt working..... Whats d prblm?
simple fix for py code 4. De-indention the cleanup.
Hi I have tried a number of these and I just can not get the Relay to turn off. Relay turns on using GPO 4 but does not turn off. I have copied the code exactly.
The only error is scrit1.py:14: RuntimeWarning: A physical pull up resistor is fitted on this channel!
GPIO.setup(i, GPIO.OUT)
Can you help?
Hey, really good video! I really hearing about your raspberry pi project. I have new raspberry pi and i am a little bit confused about one line of code:
# loop through pins and set mode and state to 'low'
for i in pinList:
GPIO.setup(i, GPIO.OUT)
GPIO.output(i, GPIO.HIGH)
thr comment says that the GPIO has to be set to LOW. Then why is the GPIO output set to HIGH ?
Erm. I erm... errr... Because... err... Are you saying I made a mistake? IMPOSSIBLE. Only humans make mistakes!
(Well spotted, I've already adjusted the code and reposted it on lpaste - I've recently started a github too, and I'll post it there soon. I noticed another booboo too, but shhhh... don't tell anyone.)
@@skiwithpete there are no mistakes only happy accidents and
Learning opportunities. :)
Is it possible to have a single web interface with two or more Pi's (each having its own relay board)?
+Alan Green Yes. But that doesn't mean I've figured out how to do it. Just have a text file on one, and the other reading it every so often interval... As a first thought.
yes just give them different local IP addresses and use PHP to access databases created seperately by each PI... very easy logic to follow
HI! i have done everything as shown. all works fine, except the .html php code
Just nothing happens! Any help?
File extension must be .php
Hi, great video and thank you but i am having trouble where if i click on the html file i made and saved the python script is not initiating ? any ideas ? if i run the command through terminal to run the python program it works fine but via the browser, nothing ? is it something to do with the apache server i may be doing wrong ?
it must be a php file. and the php server engine must be installed.
any chance you could point me in the direction of how to do this ? thanks in advance
rename the html file to php
in what folder location on the pi do you store the index.php file at?
on a raspberry pi using apache2 webserver then probably in the /var/www/html folder check your /etc/apache2/apache2.conf file for
What's the purpose of that blue jumper on the relays?
dgcompany54 the blue jumper links VCC and JD-VCC. If you want to isolate the relay coil drive voltage from the optocoupler VCC, you will need to drive the node labelled JD-VCC with another 5V supply. In the example in the video, I leave the jumper connected.
Hi, It is nice vedio. Thanks for all effort. I need to write Python Code to control this serial relay control board or amother serial similar cotrol board using my normal serial Comm port on my desktop under Microsoft Windows, I wounder if you have the code or can help n writing it?!. Thanks
Luke Eskander I don't know Windows, sorry.
THANK YOU SOO MUCH!
You're very welcome. Thanks for the kind comment!
Is not strange that to turn on the relay you have to GPIO.output LOW and to switch it off to GPIO.output HIGH. It cannot be setup in the opposite way?
davidlyons24 you can... But I don't think it works the way you think it works. But yeah, do it anyway. It won't harm.
skiwithpete I can't get script5a to turn off my relay light ??!! please help
Does it need to be web based? Can this be completely offline ?
why didn't you show the alternative normal PC versions in the UK we all use PC's not MACs
Rod Holland I don't have a PC.
i understand you posted it last year but i cant get it working. on pin 2 it is on cant turn it off and on pin 8 it is just off cant turn it on using raspberry pi 3 model b single relay. my relay has +, -, and s i presumed + for 5v, - for ground and s for signal. Hooked it + on pin 2 and - on pin 3. running your script gives
Traceback (most recent call last):
File "on.py", line 22, in
GPIO.output(14, GPIO.LOW)
RuntimeError: The GPIO channel has not been set up as an OUTPUT
Any help will be appreciated.
your traceback error tells me you have modified the code. unfortunately I don't have enough information to help you. the error you describe with lights staying on makes me wonder in you have the correct optocoupler relay. I suggest you look on Google for more help. thanks