Holy shait Daniel that is so awesome. We got to see you spend 700+ dollar semi live. But the key takeaway from this is that you only need to spend this once and every subsequent artwork only costs you the minting and URI update gas. That really made erc1155 sink in for me. Thank you!!!
thanks soo much Daniel! This contract does almost everything. I really like how you can make changes nfts. I loved it! It was easy to follow steps. Thanks a lot!
There is an explanation that mint tokens, do not come out on RinkebyEtherscan (later visible on RinkebyOpensea). While on RopstenEtherscan doing the same operation they come out as in the tutorial and then on RopsteRirable? And finally, always a huge thank you to Daniel.
Great video! Thank you for providing this! I liked especially the part with the contract code on Etherscan. You also show how to interact directly with the contract using Etherscan. Cool! Please consider to use the additional functionality of ERC1155 in future videos. For example creating an ERC20 token within the same contract. For the example you provided an ERC721 contract would have been sufficient.
Again a great tutorial very well explained. Thank you! Qn: Is it the same steps for deploying on the Polygon blockchain? (guessing we just need to choose Polygon inside Remix IDE?)
@@HashLipsAcademy Awesome! Will try next, but Thanks to you! I created my first contract on the Rinkeby network, all pulling to Testnet Opensea! Thank you so much Daniel, you made it so easy!
Thanks for always having a solution available for the problems we have out here!! Best tutorials by far!! Is there a video, or an article you recommend on the follow through of a smart contract such as burning tokens, closing contracts, general good practices after transactions? Any direction would be helpful. Thank you again!
Thank you for the great tutorial! A question, when setting your uri can you choose a different ID and string than the one you minted? So the the 25 tokens you've created will each display a distinct image other than the one you minted?
As an artist, you're saving our time man, & I'm not a programmer or tech-savvy guy so can u teach how can we put attributes in there for 10k nfts? Help me out man
What a great tutorial! Easy to understand and follow-through, I wonder if We can plug this contract into a Dapp where collectors can mint from? Thanks a lot in advance, and please keep producing a gem of content like these!
@@Dani-yk8sj have not tried this yet, my arts are still rendering (Feb 2022) and it turns out you can use a dapp on this contract like any other ones out there, however, I plan to use this in the future but erc721 for the very first project on eth network.
Thank you for making this video. It is helping me understand how these standards work. Is there any way to avoid those brutal transaction fees, especially when deploying the contract? Does it cost more if the contract is longer?
Thank you, perfect timing for what I was trying to do! One question, how would you go about adding new items to the same collection on this contract? and can you split royalties based on who created which art?
Heya, I’ve been following your tutorials for quite a long time. Thanks for the great content you produce. I have a question if you are able to take your time and help me with an answer will greatly appreciate it. I have 1 NFT collection. 1 layer has 3 elements on the design (Race, Power and Symbol). I exported them under 1 single PNG because they need to have the same color. When I am generating the images with your code, the metadata on this trait will be like: Race, Power and Symbols: X race with Y power and Z symbol I would like to separate the metadata of them to become like: Race: X Power: Y Symbol: Z While I cannot do it when I am exporting the layers from Photoshop, because I need them to be linked together, is there a way to do it from code? Without manually editing 10k metadatas? I was thinking to a way to update the metadata to separate them into 3 new attributes and extract from the text the info, but I do not possess the coding knowledge. Let me know if this is a thing that you can do Thank you 🙏 Keep up the good work
Thank you so much for this video Daniel! I just have one more question, if I wanted to deploy my contract on polygon's network, instead of using ethereum's, would I simply have to first check if my wallet is connected to polygon's network before deploying or do I have to change something on the code?
@@HashLipsAcademy well that's fair :), if you ever have time, would love to see you explain to the more advanced fans how to get that working, I've recently learned it, after I learned remix from that gave me the base to learn more advanced techniques, thanks again :) you are a beast! keep up the good work!
I have always loved your videos Danial. May God bless you with a happy life. I got a question: Is it the same when we want to deploy a collection? Thanks
When you list your items as 23 unit. People can not buy 1 unit at a time. Is there a way to list all of my items and people can buy 1 unit at a time. Thank you!
Nice art and video, thank you Daniel ! But I still wonder : is it possible to add a big collection (eg 2000 nft) in one time with this contract ? ( I watched many videos, but the old methods seem to not work anymore...👻 )
question, with the burn for mint function it seems that the owner of the NFT contract can burn peoples tokens without their permision as long as it gives a new token in return. why is this function implimented in this way, does anyone know?
Can someone help me understand why it's so expensive to mint the initial contract, compared to the mint cost to add to the contract? Just in general, why is the initial mint price so high? That's my main question.
Is it possible to mint 10K nfts by myself? (no dApp) Set the max mint amount per tx to 10K, and set the mint amount to 10K before clicking the Mint button?
Thank you for this amazing video, I’m just having a little problem after deploying the contract to rinkbey, the image of the nft won’t load in the openSea, would you be able to help me with that!?
i want doc.file And Why is metadata editable? But when I look at someone's picture description. There, I can see metadata centralized. How to get centralized metadata.
sir do you have tutorials on how to create metadata for the whole collection? my images are already done but i dont know how to create the json files for the whole collection.
Hey man, a lot of people in the discord are struggling with the metaplex and candy machine parts of the "Creating a Solana NFT collection" because the video is outdated and the docs have changed quite a bit since the video upload. Specifically, I am struggling with an issue where when I create the candy machine, it says uploaded 2000/2000, Successful = True, but the key size says zero. When I go to mint, it says there are 0 remaining. Any way you can make a follow up video to show how to do it with the new docs? Thanks for your help, I wouldn't be where I am without you!
I am geeting this error how to fix this? the error appears when I click on the deploy [ethjs-query] while formatting outputs from RPC '{"value":{"code":-32603,"data":{"code":-32000,"message":"replacement transaction underpriced"}}}'
How to use this to put it on dapp to be minted bu users? i guess we cant ... I mean if we made a game and i want to put character nft mint weapon mint , etc etc
Thanks for watching and commenting don't forget to hit the subscribe button. ➕ ① . ..③ …① .. ③ . ④. ⑤ .. ①.. ① … ⑦. ⑨ .. ④ . For more info and support at anytime text w h a t s a p above.
Hi Daniel! Thanks for sharing your knowledge. I'm totally new in this NFT universe and I have a question. Let's say that I want to create a collection of 100 items (UNIQUE items like BAYC) and I would like to have this 100 items collection split into 2 categories like this: 75 items randomly generated and 25 items manually customized (all of these 100 items would be in the same collection). Is this ERC1155 option the best one? And dou you have any tip or opinion to suggest? Best regards!
@@italimarco@ Marco Bucci it has more flexibility for nft system development and if we limit nft quantity to just 1 quantity it is like erc721, but erc721A is cheaper than erc721 and erc1055. I'm still trying to compare on goerly
Am I correct in thinking that deploying this one contract cost about $650? Also how would one scale this for “10,000 nft” projects with individualized attributes, or is there another way that would work?
I think on the discord people were saying its around 800-3000 usd depending on when you deploy. If you join the server and search terms like "deploy contract cost", you might see others post history on the topic as well (800 was a number i kept seeing but this was on erc721)
@@heidimacomber859 no its not. I can help in any way. I use Macro recorder it comes with a 45 day free trial. I converted my metadata file to an excel file online, and uploaded it with the macro recorder. If you try it once you'll get a hang of it. download macro recorder. open the opensea website by entering the link in the web page opening action. and then start recording the uploading process slowly and carefully. after you're done, bulk edit the delay action to 30 or 40 ms. wherever there could be a delay for internet connection increase the delay action to extra seconds. I can send you the sample of my macro file if it could help. I have a lot of properties so it is quite big.
Hi Hashlips, why i can't complete listing in OpenSea. Why i can't Unlock Currency it's says error There was an error with your transaction. Please try again. Plzz help!!!!!!
Hello sir I have created NFT and buyers are ready to buy NFT. I would like to know from you how much is the gas fee and how this transaction will be completed Please help me sir 🙏🙏🙏🙏
Hey Hashlip, I was wondering would it be possible to have in a project for example first 1000 nfts free to mint than the rest to have their price? If so how can I implement such function in a smart contract
You can use the update price function in the contract for that purpose. Set the price at zero when deployed then change the price after the free mint. Hashlips also has a video on how to make a dynamic mint price.
@@Ellis9144 is there not a specific function that can automatise the process? say 1000 have been minted for free and after that 1001 to the last number would cost 0.1 without me having to interact with the contract and without having a pause in the mint between free and paid
Thanks for watching and commenting don't forget to hit the subscribe button. ➕ ① . ..③ …① .. ③ . ④. ⑤ .. ①.. ① … ⑦. ⑨ .. ④ . For more info and support at anytime text w h a t s a p above.
Thanks for watching and commenting don't forget to hit the subscribe button. ➕ ① . ..③ …① .. ③ . ④. ⑤ .. ①.. ① … ⑦. ⑨ .. ④ . For more info and support at anytime text w h a t s a p above..
Holy shait Daniel that is so awesome. We got to see you spend 700+ dollar semi live. But the key takeaway from this is that you only need to spend this once and every subsequent artwork only costs you the minting and URI update gas. That really made erc1155 sink in for me. Thank you!!!
You did it I was one of the people who asked for this thank you so much you saved my life You are my HERO.
thanks soo much Daniel! This contract does almost everything. I really like how you can make changes nfts. I loved it! It was easy to follow steps. Thanks a lot!
Amazing tutorial , I started with hashlips then went into more adavancedd stuff
I created a UNIQUE ERC 1155 NFT drop smart contract
Great tutorial that is quite timely for my needs. Thank you!
Only a pleasure
Thank You for the great video once again. Kindly create a video on ERC 721A smart contract as well.
LETS GOOOOOOOOOOOOOOOOOOOOOOOOOO FAVORITE UA-camR EVER
Helpline 📲📩
QUESTIONS CAN COME IN ⬆️⬆️ 🆙☝️..
Thanks Brother, I really needed this
There is an explanation that mint tokens, do not come out on RinkebyEtherscan (later visible on RinkebyOpensea). While on RopstenEtherscan doing the same operation they come out as in the tutorial and then on RopsteRirable?
And finally, always a huge thank you to Daniel.
Great video! Thank you for providing this! I liked especially the part with the contract code on Etherscan. You also show how to interact directly with the contract using Etherscan. Cool!
Please consider to use the additional functionality of ERC1155 in future videos. For example creating an ERC20 token within the same contract. For the example you provided an ERC721 contract would have been sufficient.
thank you!!! love your channel :)
Amazing as always!!! Your videos are amazing as always! Is it possible to integrate this contract into your pre-built minting d-app?
Again a great tutorial very well explained. Thank you! Qn: Is it the same steps for deploying on the Polygon blockchain? (guessing we just need to choose Polygon inside Remix IDE?)
Yes just be in the right network
@@HashLipsAcademy Awesome! Will try next, but Thanks to you! I created my first contract on the Rinkeby network, all pulling to Testnet Opensea! Thank you so much Daniel, you made it so easy!
@@cyril1111 Hey man! Does it also work on polygon with erc-1115? Thx!
Thanks for always having a solution available for the problems we have out here!! Best tutorials by far!! Is there a video, or an article you recommend on the follow through of a smart contract such as burning tokens, closing contracts, general good practices after transactions? Any direction would be helpful. Thank you again!
This video what I waiting to see
awesome tutorial thank you so much :)
hi daniel, great tutorial as always btw can you teach us about ERC-721A contract that allows users to mint multiple NFTs at nearly the cost of one.?
@HashLips NFT hi fake hashlips! scamming much?
thanks a lot, pls make a tutorial on creating an Nft marketplace contract too
Thank you for the great tutorial! A question, when setting your uri can you choose a different ID and string than the one you minted? So the the 25 tokens you've created will each display a distinct image other than the one you minted?
As an artist, you're saving our time man, & I'm not a programmer or tech-savvy guy so can u teach how can we put attributes in there for 10k nfts? Help me out man
Best Tutorial
What a great tutorial! Easy to understand and follow-through, I wonder if We can plug this contract into a Dapp where collectors can mint from? Thanks a lot in advance, and please keep producing a gem of content like these!
Did you figure out how to do that?
@@Dani-yk8sj have not tried this yet, my arts are still rendering (Feb 2022) and it turns out you can use a dapp on this contract like any other ones out there, however, I plan to use this in the future but erc721 for the very first project on eth network.
Thanks for an awesome tutorial.
Only a pleasure
Excelente video! muy explicativo!
Hey Hashlip, can you teach on how to setup a mint pass. Thank you for all your great videos so far
Yes I can
Thank youuuuuuuuuuuuuuu👌 for this video
Only a pleasure
Great video 👍☺️
Thank you
Thank you for making this video. It is helping me understand how these standards work. Is there any way to avoid those brutal transaction fees, especially when deploying the contract? Does it cost more if the contract is longer?
Thank you, perfect timing for what I was trying to do! One question, how would you go about adding new items to the same collection on this contract? and can you split royalties based on who created which art?
Dan, can you make an update video about ERC-721A deep dive and how to deploy the smart contract
Heya,
I’ve been following your tutorials for quite a long time. Thanks for the great content you produce.
I have a question if you are able to take your time and help me with an answer will greatly appreciate it.
I have 1 NFT collection. 1 layer has 3 elements on the design (Race, Power and Symbol). I exported them under 1 single PNG because they need to have the same color.
When I am generating the images with your code, the metadata on this trait will be like:
Race, Power and Symbols:
X race with Y power and Z symbol
I would like to separate the metadata of them to become like:
Race: X
Power: Y
Symbol: Z
While I cannot do it when I am exporting the layers from Photoshop, because I need them to be linked together, is there a way to do it from code? Without manually editing 10k metadatas?
I was thinking to a way to update the metadata to separate them into 3 new attributes and extract from the text the info, but I do not possess the coding knowledge.
Let me know if this is a thing that you can do
Thank you 🙏
Keep up the good work
Thank you so much for this video Daniel! I just have one more question, if I wanted to deploy my contract on polygon's network, instead of using ethereum's, would I simply have to first check if my wallet is connected to polygon's network before deploying or do I have to change something on the code?
I like this type of videos
😊
Great video. Thanks
So good! Thank you so much!
198th...Thanks... Just in time...Cheers
wow! it worked perfectly
well done. thank you!
18:34 why it cost 600dollars in gas fees what was it for
for deploying 1000 the nfts?
Hey Daniel! Can You teach us how to create a presale contract? Thanks for all the amazing content.
Hey daniel, love your videos, is there any reason you don't use truffle + ganache for local testing? Or make videos about that?
Yes because it’s easier for new comers to get use to remix first
@@HashLipsAcademy well that's fair :), if you ever have time, would love to see you explain to the more advanced fans how to get that working, I've recently learned it, after I learned remix from that gave me the base to learn more advanced techniques, thanks again :) you are a beast! keep up the good work!
I have always loved your videos Danial. May God bless you with a happy life.
I got a question: Is it the same when we want to deploy a collection?
Thanks
Yes it’s the same
And thank you so much for the support
you the king!
Helpline 📲📩
QUESTIONS CAN COME IN ⬆️⬆️ 🆙☝️..
Fantastic! Thank you so much
Quick question: prior to watching this video I froze my pictures through OpenSea. Can I still follow your steps?
Great vid thank ypu
Hey man! Thank you for existing lol! Can i deploy ERC1155 on Polygon network?
When you list your items as 23 unit. People can not buy 1 unit at a time. Is there a way to list all of my items and people can buy 1 unit at a time. Thank you!
Am here first again
Great Tutorial. Are you going to make a Tutorial on ERC721A like azuki?
great tuto broda
Can you do a batch transfer of the ERC1155 Thanks for this video this is one of the hardest to create a batchtransfer for
Gn: How do I deploy for bulk images?
You are the best I know
Hi, Daniel I used an ERC 721 code from Hashlips and I would like to solve de ABIcode. You have a link for a video showing how o solve this? Thank you.
Road to 100k!
reach out 👆👆For more info and guide📩.
Excellent. Thanks.
This is a great walkthrough from A-Z, but how do I deploy 1000 NFT at once on ERC1155?
Thanks very much. Do you know how to sell mystery boxes?
Excellent tutorial. Is there a way to deploy a contract and mint under an existing collection on Opensea?
How do we add music album through an ERC- 1155?
Nice art and video, thank you Daniel ! But I still wonder : is it possible to add a big collection (eg 2000 nft) in one time with this contract ? ( I watched many videos, but the old methods seem to not work anymore...👻 )
Reach out for help and support only☝️
Also make video on what metadata should we provide our fiverr client
Why did you choose to flatten the contract?
Would the metadata be compatible with previous art engine tutorials?
Hey Daniel! Would you ming going over the ERC-721A contract? Thanks so much :)
Hi Hashlips! Is there anyway you can make a Dapp for a dynamic Nft that can modify an already existing Nft with new traits?
Awesome !
question, with the burn for mint function it seems that the owner of the NFT contract can burn peoples tokens without their permision as long as it gives a new token in return. why is this function implimented in this way, does anyone know?
would be nice to see how different it's from ERC 3525
👆̵s̵e̵n̵d̵ ̵a̵ ̵d̵i̵r̵e̵c̵t̵ ̵m̵e̵s̵s̵a̵g̵e̵ ̵f̵o̵r̵ ̵s̵u̵p̵p̵o̵r̵t̵ ̵a̵n̵d̵ ̵g̵u̵i̵d̵a̵n̵c̵e̵ .̵.
Is there any way to change the mint price on the smart contract once it’s been deployed and already had some minted
Can someone help me understand why it's so expensive to mint the initial contract, compared to the mint cost to add to the contract? Just in general, why is the initial mint price so high? That's my main question.
Hello, love the channel! Question, does anyone know how you could make a minting dapp similar to what they made in hashlips ERC721 tutorial?
Hey Hashlips, do you know how the metadata (json) should be for a multimedia NFT like a MP3?
The same but I guess instead of the image it needs to point to a media file
You beautiful human! Thank you, you helped us significantly! #💯Artisan
Can ERC-1155 have withdraw function like ERC-721?
Is it possible to mint 10K nfts by myself? (no dApp) Set the max mint amount per tx to 10K, and set the mint amount to 10K before clicking the Mint button?
thank you!
Anyone know why the account I select in deploy and run isn’t switching to to inject to web3? Thanks
Can all this be done on the the test net?
Thank you for this amazing video,
I’m just having a little problem after deploying the contract to rinkbey, the image of the nft won’t load in the openSea, would you be able to help me with that!?
Helpline 📲📩
QUESTIONS CAN COME IN ⬆️⬆️ 🆙☝️..
i want doc.file And Why is metadata editable? But when I look at someone's picture description. There, I can see metadata centralized. How to get centralized metadata.
sir do you have tutorials on how to create metadata for the whole collection? my images are already done but i dont know how to create the json files for the whole collection.
Can the same thing be done on polygon?
Hey man, a lot of people in the discord are struggling with the metaplex and candy machine parts of the "Creating a Solana NFT collection" because the video is outdated and the docs have changed quite a bit since the video upload. Specifically, I am struggling with an issue where when I create the candy machine, it says uploaded 2000/2000, Successful = True, but the key size says zero. When I go to mint, it says there are 0 remaining. Any way you can make a follow up video to show how to do it with the new docs? Thanks for your help, I wouldn't be where I am without you!
I am geeting this error how to fix this? the error appears when I click on the deploy
[ethjs-query] while formatting outputs from RPC '{"value":{"code":-32603,"data":{"code":-32000,"message":"replacement transaction underpriced"}}}'
How to use this to put it on dapp to be minted bu users? i guess we cant ...
I mean if we made a game and i want to put character nft mint
weapon mint , etc etc
Helpline 📲📩
QUESTIONS CAN COME IN ⬆️⬆️ 🆙☝️..
there is nothing on a scroll part where we are going to flatten image. how to fix it please?
Helpline 📲📩
QUESTIONS CAN COME IN ⬆️⬆️ 🆙☝️..
Could I have a mint features on the front end of my website instead ?
Thanks for watching and commenting don't forget to hit the subscribe button. ➕ ① . ..③ …① .. ③ . ④. ⑤ .. ①.. ① … ⑦. ⑨ .. ④
. For more info and support at anytime text w h a t s a p above.
Hi Daniel! Thanks for sharing your knowledge. I'm totally new in this NFT universe and I have a question. Let's say that I want to create a collection of 100 items (UNIQUE items like BAYC) and I would like to have this 100 items collection split into 2 categories like this: 75 items randomly generated and 25 items manually customized (all of these 100 items would be in the same collection). Is this ERC1155 option the best one? And dou you have any tip or opinion to suggest? Best regards!
add 25 item to 75 generated item, then in json you add manually metadata file one by one.
@@leslukis and is this ERC1155 the best option in your opinion? Thanks!
@@italimarco@ Marco Bucci it has more flexibility for nft system development and if we limit nft quantity to just 1 quantity it is like erc721, but erc721A is cheaper than erc721 and erc1055. I'm still trying to compare on goerly
How to change contact name ?
Can we send back the royalties to the sc address?
hello sir. please create a video on kleytn smart contract
How to upload multiple nfts at once?
Am I correct in thinking that deploying this one contract cost about $650? Also how would one scale this for “10,000 nft” projects with individualized attributes, or is there another way that would work?
I think on the discord people were saying its around 800-3000 usd depending on when you deploy. If you join the server and search terms like "deploy contract cost", you might see others post history on the topic as well (800 was a number i kept seeing but this was on erc721)
@HashLips NFT🚨🚨🚨 this is not Daniel's account. SCAM ALERT 🚨🚨🚨
I'm using macro recorder to upload for free. it takes days for a 10k collection but still it costs nothing
@@zamyndcrochet would you mind sharing the macro? is it on Github?
@@heidimacomber859 no its not. I can help in any way. I use Macro recorder it comes with a 45 day free trial. I converted my metadata file to an excel file online, and uploaded it with the macro recorder. If you try it once you'll get a hang of it.
download macro recorder.
open the opensea website by entering the link in the web page opening action.
and then start recording the uploading process slowly and carefully.
after you're done, bulk edit the delay action to 30 or 40 ms.
wherever there could be a delay for internet connection increase the delay action to extra seconds.
I can send you the sample of my macro file if it could help. I have a lot of properties so it is quite big.
Hi Hashlips, why i can't complete listing in OpenSea. Why i can't Unlock Currency it's says error
There was an error with your transaction. Please try again. Plzz help!!!!!!
Hello sir
I have created NFT and buyers are ready to buy NFT. I would like to know from you how much is the gas fee and how this transaction will be completed
Please help me sir 🙏🙏🙏🙏
Hey Hashlip, I was wondering would it be possible to have in a project for example first 1000 nfts free to mint than the rest to have their price? If so how can I implement such function in a smart contract
That would be great , a good selling strategy to build urgency, would be epic🔥🔥🔥
You can use the update price function in the contract for that purpose. Set the price at zero when deployed then change the price after the free mint. Hashlips also has a video on how to make a dynamic mint price.
@@Ellis9144 is there not a specific function that can automatise the process? say 1000 have been minted for free and after that 1001 to the last number would cost 0.1 without me having to interact with the contract and without having a pause in the mint between free and paid
Yes that is possible
@@carolstelistu yes, the dynamic mint price video will show how that can be achieved.
no new tutorial for smart contract ERC1155 sir...? I tried it on testnet and it did all what you did but my contract didn't work... 🥺
👆send a direct message for support and guidance
could it deploy on polygon?thanks
Thanks for watching and commenting don't forget to hit the subscribe button. ➕ ① . ..③ …① .. ③ . ④. ⑤ .. ①.. ① … ⑦. ⑨ .. ④
. For more info and support at anytime text w h a t s a p above.
Its a semi fungible token SFT
Thanks for watching and commenting don't forget to hit the subscribe button. ➕ ① . ..③ …① .. ③ . ④. ⑤ .. ①.. ① … ⑦. ⑨ .. ④
. For more info and support at anytime text w h a t s a p above..