REPLACING THE NINTENDO SWITCH LITE LCD SCREEN
Вставка
- Опубліковано 28 вер 2024
- If you have a broken Nintendo Switch Lite LCD, you can follow this video guide.
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
MUSIC
elements.envat...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
HOW TO CONTACT ME
linktr.ee/sthe...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
DONATION
www.buymeacoff...
▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬▬
CREDIT
#sthetix #sthetixofficial
to folks watching this:
this guy made an amazing video, i followed it to the tee and everything worked well. some things to note:
1) let the alcohol soak in longer to weaken the glue. I didn't and only part of the adhesive came off
2) buy extra screws if you can! some will go missing, others will wear off
3) wipe the inside of your glass screen BEFORE putting on the LCD
4) check the buttons before u attach everything. sometimes you might miss a screw or the magnet might be out of position
5) thermal paste - do not put too much! spreading too much will worsen the heat transfer, and many folks have said that the LCD problem is due to heating issues. when i opened my own switch the thermal paste was like clay XD
6) ventilate your switch from now on- no more fancy cases without air gaps
LASTLY, THANK YOU DUDE!!!!!
You are welcome :)
Top comment right here. Btw did you use 98% IPA or 75 is good enough?
99% IPA. 75% is fine.
With thermal paste, clean it with IPA and a fine cloth, nothing even slightly abrasive, or it'll scratch the soft metals, which can cause heat pockets, on the part you're trying to cool and you only want a pea sized amount, when reapplying, unless the CPU, is like a threadripper or something else massive. Another pro tip, get yourself a non conductive pan or mod mat to work on, so you don't lose anything, also, as long as you don't ugga dugga a screw, and you apply pressure, while slowly working it loose, it'll never strip. Metal likes it slow and hard, and wood likes it fast and hard, as a good rule of thumb. You could work in a positive pressure environment, or have a humidifier going, to cut down dust.
Great tutorial! Some of those ribbon cables are so little and tricky to maneuver back into place, even when using a tweezers!
Great tutorial, but I broke my switch lite when attempting it… now I can use it for spares I guess…
Lol
bruh
how did it break?
what happened?
I am going to attempt to fix this myself
0:31 same problem about shadowing but with alot of thin vertical black lines blocking the screen. I can tell that the only way is replacing the whole LCD will solve that issue.
I have watched most of your videos. So informative! They have helped me to do many repairs and mods. Thank you :)
u r welcome
I have the same issue above, my Nintendo switch lite had a broken LCD 🥲, want to fix it but i haven't a proper tool kit to do it, but thank tho for the tutorial will do it soon after i buy the replacing kit
Thank you very much. It took me 3 hours to replace the screen. By following your video
Great job!
You are awesome man! Thanks again for this information you have been super helpful!
I thought i can fix it by myself, until i watched it 😂
I just sent mine back to Nintendo and they did that for £60. Looked a lot of hassle that and after buying the new screen, glue, screwdrivers etc probably don’t save that much.
You are literally a life saver 😩
You mean lite saver
Still wish the switch lites screen streches out more to the edges like they did with the oled. Loves its one peice but i think they could least made the screen a tad larger . Hopefully next switch lite or new switch console does this like they did with oled.
Do not to use alcohol unless absolutely 100% necessary on anything with an LCD. You will get alcohol in the backlight diffuser. Nintendo clearly states not to use isopropyl alcohol on their site as it does worse than good on a switch, it damages the plastic and the screen.
It is fine. i've used it many times. Do not use Thinner (not alcohol)
@@sthetixofficial no it's not I just destroyed 2 screens until finally finding out its the IPA rinning into the screen. the picture will look milky where IPA got into the screen. your procedure is fine if replacing a broken LCD but if you aim to take out a working LCD never ever inject IPA like in this video.
Great tutorial fix mine right after I receive my new LCD. Thank you.
Glad it helped
What kind of screwdriver and tools are you using?
ifixit ph00 and y00
I love you & i love everything you do 😆
Thank you so much for making these videos & thank you for keep doing these HATS packs, thank you very much
And i also like your taste i music 🎶😍
Thank you
Ah, you have Shin Megami Tensei V and Monster Hunter. I see you are a lad of culture as well.
thank you mister
New subby here ☺️ Thank you for this informative video. I plan to replace my sons switch screen this weekend 😅 wish me luck guys
Do you use glue or anything?
Or the screen cords have ports?
I just dropped my switch lite and the screen popped off and that little cord thankfully just got Disconnected so I wanna take it apart and reconnect it!.
And yo thanks for the video!!
i didn't glue it. the glue is intact on the plastic frame
Thanks for the vid I actually just needed to know what ribbon cable linked to the screen because my brothers had almost fully slid out of the socket causing black screen
you can buy the ribbon cable on aliexpress
I hoped that I would be able to follow but I'm sure I will mess up
Wish you were in South Africa, there are literally no repair stores here 😢
No one there?
@@sthetixofficial I found one after a lot of searching but I'm not joking when I say there are literally three, and each is in a dffferent province haha.
I just need to replace the plastic screen on top, not the whole lcd screen, is there a video on that?
This was SUPER helpful. Thank you so much for putting this out.
You are welcome.
My Yellow one just did this thid afternoom. Thinkiny if I should auction it for an extra buck to get oled or replace it myself.. hmmmm
Whats the liquid you used to remove to adhesive
ipa 99 percent
I love this channel, when do you have PS4 9.00 USB hybrid firm?
i havent tried it. maybe someday 😁.. i am not too interested in ps4 cracking hehe
Imagine replacing it with a OLED screen lol
it just wont work 😊
@@sthetixofficial oh thanks, merry chrismass
Merry Christmas
Unfortunately someone needs to make an adapter for putting an oled into an old one. Saw someone try it and it didn't work
We love you sthetix!
Do the screen not get back to blurry? I heard that some owners of switch lite got LCD blurry again after replacement? I plan to replace mine too but if the problem get back then it is pointless
it does not, but the error could re-occur someday
mine is getting the same issue ... all of a sudden. looks like the reliability of switch is way down
Hey there i got the same issue broken screen with lines on text cant read the message can i know what is the main reason about it
it just happened. i think the LCD is bad.
can be caused by too much heat to the device, please take care of your console!
What is the grey paste used here?? And was is isopropyl alcohol used to clean the parts in the assembly??
it is a thermal paste
ipa 99 percent
Quick question, is there a guide to repair the function of Amiibos on a nintendo switch lite? for some reason my switch lite, does not read the amiibos. but my other switch does. so it must be the switch lite.
maybe you need to repair the nfc chip? try asking the community at the tronicfixforum
Any idea why is mine only showing blank screen after replacing? The screen lights up though but only blank screen
Blank means something else like bad lcd chip, bad lcd connector, etc
Question, are all screws on the inside the same? Because of so, I can just put all screws in the same tray and that's it.
inside not the same.. there are yellow ones, long silver one, some short and shorter ones
@@sthetixofficial good to know. Thanks!
For the thermal paste, can I use something that is used for computers?
Thermal paste is thermal paste.
@@jerminator0688 yea well some are conductive
Merry xmas and a happy new year sthetix
happy xmas too my friend.
Sory what a gel? To replace lcd or water?
How is the screen now?
I have a problem with my switch idk what it is but the screen is just black and I can still hear everything but I can’t see anything anyone have that problem idk what it is
Is the screen replacement the same for the Nintendo switch lite and the normal one ? On Amazon I seem to find screens only for the normal Nintendo switch
no, it is different.
Any update after replacing the screen. Does the promblem screen lining occur??
it does, and it depends on your screen quality too
Thanks ❤
My switch is not turning on after lcd replacement. I don't know if it's a defective lcd or a lose/broken ribbon cable. Do the ribbon cable pins break easily when pushing it too far?
try to get a new LCD screen.
@@sthetixofficial I tried the old lcd and it's not working as well. (It works before the replacement)
I just replace mine too now and it doesn't turn on. Any suggestion? I tried to put the old one that work with bad screen and still doesnt turn on. I check all the cables and its all good. I think i meesed up my switch. Do you have idea on this?
@MrGrey-op6dz maybe the flex ribbon cable (the main cable that connects the main board and the childboard is damaged)
Is the thermal paste specific to the switch or can i use the one for cpu on computers?
you can use the one that is usually used on a PC
Whoever put in the screws made sure no one or anything can unscrew them
I can't remove 4 screws
Whats tools should i use?
what tools?
Is there a professional I can talk to that can do this for me? I’m worried if I try I might mess it up
maybe you can go to the gbatemp to ask them.
what causes this and how can we prevent this from happening?
it could happen suddenly and we cannot predict it.
What can i use to break up that screen adhesive idk what that syringe is 😂
Use an Isopropyl Alcohol 99%
I have this issue as well. Do you have any idea that cause this issue?
We dont know.
What's that cement stuff you put on those 2 parts?
Which parts?
@@sthetixofficial the adhesive?
I didn't add it, It is there sticking on the frame
@@BleeedinGreeen I think you're asking about the thermal paste. It's silver in the video correct?
Switch lite sama rusaknya, karena ngecharge sambil download game terus gak tak keluarin dari tasnya, jadi ketutup fannya.. kalau ganti thermal perlu buka yg nutupin processornya gak?
Perlu bro
Can you put 6.2 dispay from big Switch on it?😅
😜no
what's the size of your + screw?
Ph00 from. Ifixit
Buka jasa reparasi gak om untuk lite? kira2 kalo ganti lcd estimasi harganya berapa yah?
bisa, wa aja untuk harganya
What is the size and name of the screen
the switch lite screen, it is on aliexpress
Halo, untuk switch lite yg hardmod apa caranya tetep sama ya untuk ganti lcd?
Sama aja
HI can i use a IPS or OLED Panel instead ?
no
@@sthetixofficial Thank you for the reply
is it because of compatibility issues?
because the socket is different and the pinout is different.
@@sthetixofficial Thank you for the Effort rly appreciated sadly cannot subscribe twice haha
thank you
Do you accept repair commissions and if not, could you tell me anyone who can
Yes I do but I am in indonesia
@@sthetixofficial okay
so can you put a 1080p screen on it? or a 480p screen?
Switch is 720p
@@sthetixofficial yes, i know, but replacing the 720p screen with a 5.5 inch 480p screen, could work, I theory right?
How about the pins connection?
mang, ngelepas lemnya bisa pake cairan IPA ?
memang pake IPA
beli toolkitnya dimana, saya beli buat buka yg dalem g bisa , malah pada bopeng 🙏
Ifixit bro
Is 70% IPA good?
I never use it but please try it.
pake tinner aman gak om buat melepas lcd yg melekat?
tidak aman. tar plastik nya leleh. pakai alkohol aja
itu cairan apa ya yg dipake d suntik bang? sama harga lcd switch berapaan ya ?
IPA = isoprophyl alcohol, 99%, LCD bisa cari di toped deh.
ga yakin
ipa 99nya beli dimana gan ??
toped banyak
Bang. Buka jasa service ngg ? Kalo buka aku mw kirim switch ku buat service.
bisa, wa aja tar.
Gan kira kira penyebab layarnya gini knp ya? Biar mengantisipasi
bisa tiba2 rusak
Bang punya saya juga gitu..bisa bantu benerin gak bang
gitu apanya? layarnya?. bisa aja kudu ganti lcd
what is caused of vertical lines?
we dont know..it is random
@@sthetixofficial my switch lite have never been dropped but it already had vertical lines 2 times this year..
Yes it is common
these things r a waste of time & money,a laptop is enough
I literally just bought a broken switch lite on Facebook. Thanks lol
How'd it go? just got one for 80$ cad, gonna reinvest another like 50$ or near that and either keep or resell for profit :)
thanks dude, i bought one with a smashed screen for $80 and was afraid nintendo made it super difficult to change the screen like some phone companies do
I’m seeing one on marketplace for 50$
Do you think its possible to fix it?
This little handheld console is riddled with hardware problems one after another.
Not rly
@@CarpetBananaYou can literally bend the switch lite with your bare hands
I've been having problems with my Nintendo switch lite randomly switching to other apps without notice and it kept doing that so it caused me to completely destroy the screen.
@@steveboone1498 can i have it
@@mrmarr8308 no, not at all.
Thanks for the guide broseff! Got it done in an hour 👍
It's around $80 to replace the lcd here. Thank you for this tutorial
.
May I ask if the replacement you had here has a lcd digitizer too? Or is it a separate item?
it is only the LCD, digitizer is separated from the LCD, it is another component
@@sthetixofficialhi my switch lite became blurred on the lcd and i want to replace it. What should I buy? Just the lcd or this digitizer? Sorry I'm on this repair stuffs.
The LCD of course.
Doing too much. Find a better tutorial. Unscrews a few bits that don't need to be and it's a good way to lose bits or mess up for inexperienced diy fans. Also, if you are here after buying a screen kit make sure it includes thermal paste before you begin. Else go order some
this just now happen to mines while playing a game, hints why im here
you always upload the most helpful vids, bless you dude and have a merry christmas
merry Christmas 😊
Thanks for the video!
Did you apply any adhesive before assembling the new lcd?
no i didnt because the existing glue is intact.
Lol U r near to 100k now 0_o i remember when u had like 15k subs. Congrats bro
thanks a lot
Going to use this to fix my boys' switch! Thank you
My switch lite worked real well and it was second hand it just messed up cuz something heavy fell on the screen n broke it but the system itself is still fully functional
It happened to me on my lite again yesterday.....and i just changed the screen 6 months ago. Wondering whether i should just give up on the switch and buy a steam deck
Always clean job brother thx
What magic is this? No heat gun required, no adhesive needing a gallon of isopropyl alcohol and various scraping implements to remove, no 50 different fasteners needing custom bits to get out? This can't possibly be true of the best handheld gaming system around, can it?
Try it and you will know later
The power connector that connects the battery to the board... just a word of caution... mine snapped attempting to pry the connector off gently.
Gonna order a new part for my gf's switch and see about getting this done when I'm in the office. Would you encourage me to redo the thermal paste while I'm at it as we break the original bonding?
Yes you need to apply a new thermalpaste
I just replaced mine a week ago and the brand new screen have this problem again ughhh 😢
I just replace mine too now and it doesn't turn on. Any suggestion? I tried to put the old one that work with bad screen and still doesnt turn on. I checked all the cables and its all good. I think i meesed up my switch. Do you have idea on this?
Ah i just happen to know that you could use ipa 99% to remove the screen. I though it can only be removed using heatgun to melt the glue
Thank you so much! One happy kid over here 🎉
I tried this, and im just getting a black screen, any suggestions lol
maybe you didnt lock the lcd screen socket?
Mau bongkar sendiri masih mikir bang😅
When I tried to transfer a good LCD to a good front shell with a heat gun the LCD seperated into two pieces. Live and learn I guess.
My charge port is not working after doing this
U might have damaged the port or something else
After watching this i immediately cancel my order for screen replacement these things are just to complicated
😂😓
Hey I have some stupid question.. is it possible to replace switch lite LCD to OLED screen?
not possible