Great work my guy, killing me with the Bike levers for acceleration and braking. I'm sure with your skills you could fabricate your traditional gas and brake pedals. Keep up the good work though, one of the best builds thus far.
Man I like it don’t take me wrong but it’s so disappointing if you did all that monster work what kept you from making it a tiny bit bigger and put a bigger engine since I’m sure skills isn’t an issue you can find some 750 800 cc motorcycle engine all day long, anyways great build
Yeah he couldve added a better engine because this engine i believe wont even push out 30km/h so at this point the spring choice was very expensive too he could have went with rigid type axle suspension
Nice work,I probably put this in my list to do.I do make like this without motor self power to my daughters before long time ago,maybe it’s time to make like this anyway all I need is old motorcycle and used wheels.thanks for the video
I watch a lot of these type videos b/c these folks are far more than mechanics..... lol, it's in their artistic ability that comes to the surface & I like seeing how they solve different aspects of the build along w/ the fabrication of the piping. It's kool to see!
damn fine lookin buggy :). everything looks fine, but is the enough space to seat comfortably even with motocross helmet on? because i wouldnt ride around without a helmet ... what kind of engine is that? looks like aircooled, or you just didnt installed radiator yet?
great video bro.i love the fact that you dont have a nice clean garage with every tool known to man, just a piece of shit welder and a drill press made in the 60's. your whole approach gives me hope that i to can pull something like this off. thank you for making this video and sharing . it really is the best video o all f you tube inmy humble opinion
When you have a shitty bender - just fill the pipe with sand, cap it with some aluminum tape before bending and see the difference. Nice work, though! ;]
You have to be one of the best recyclers on the tube, I am constantly complaining that I don’t have enough stuff to make another project and you can turn one into another at will 😀🤟🏻 I applaud your dedication and effort and look forward to your next mobile steel coffin😊
To do something like this is brilliant.. it's a shame that he painted it.....what a pity. it needed a teroson put all over and paint over .. kind of raptor.. or even raptor but it's not worth the investment... to spray paint... it's shit..
аааааа ведь есть много инструмента включая трубогиб, ну почему же нет нормального полуавтомата? криво варить электродом, а потом зачищать насраные швы это прямо больно видеть
Yes the arms need to be TIG welded first then heat treated and annealed. I actually would never go fast in any vehicle built in this manner those welds are subject to failure at any time.
I want to doo something similar but i want to put my v6 fiero motor in it and make a sand rail and i want to do this all with my harbor freight titanium flux 125 welder anybody think its possible 😮 hit me up in the comments
А мне понравилось! Этот мужик вообще ничего не боится, делает как знает. Руль на 3d принтере и куски рессоры вообще шедеврально 💥. Забавно, что эта штука ездит 💪. Автору респект и новых проектов на фоне красивой природы 👍👋💯
И не зря. Как мне кажется, тут ещё плохо настроен развал схождения, из-за чего повороты будут ещё труднее. А то, что отсутствует дифферинциал, то это иногда наоборот помогает преодолеть бездорожье из-за отсутствия механических потерь и неверного перераспределения нагрузки колёс
Oh yeah? Well Pete if you are such a critic, then show us what you can do? Starting with my buggy frame, when you finished it I'll judge you, lol. Listen if everyone on YT was a goat welder, the majority would be too discouraged to have a go and then never get better or even have completed something of their own. Welding isn't my strongest skill, as a qualified Mech I wonder if it's okay for boiler makers to driver around with poorly tuned engines or malaligned suspension goemetry, or should we pull them up about it? lol.
Lenkung funktioniert nicht, da hinten kein Differenzial Rahmen bohrt man nicht an, da werden Ösen angeschweisst (Auspuff, Dach) Motor zu schwach, kein off road möglich Federung funktioniert nicht, Federn zu hart Motor hat keinen Wind zur Kühlung, da Sitz davor und noch viele Fehler mehr.
Acredito que ta errado o projeto, não mostrou a parte da corrente que passa a tração, mas da pra entender que como o motor esta fixo e o eixo traseiro se mexe, ele não pode pegar buraco senao estragaria a relacao da corrente, seria massa se ele mostrasse isso, mas até entao entendo como um pessimo projeto
Great work my guy, killing me with the Bike levers for acceleration and braking. I'm sure with your skills you could fabricate your traditional gas and brake pedals. Keep up the good work though, one of the best builds thus far.
Another really good project sir. Thankyou for sharing.
Man I like it don’t take me wrong but it’s so disappointing if you did all that monster work what kept you from making it a tiny bit bigger and put a bigger engine since I’m sure skills isn’t an issue you can find some 750 800 cc motorcycle engine all day long, anyways great build
Yeah he couldve added a better engine because this engine i believe wont even push out 30km/h so at this point the spring choice was very expensive too he could have went with rigid type axle suspension
Parabéns meu amigo ficou top!!!
Muito bom irmao parabéns tambem estou pensando em fazer um pra me divertir
You have an amazing imagination. Bravo! But how can you drive an unregistered vehicle on public roads?
you should check the front suspension bro
Why what's wrong with it 😕
@@rockman49er in my opinion, the stand geometry is a little bit low
Very nice work. Looks great. How many cc is the engine? Also what is the diameter of rear shaft? Thankyou
Вал наверно на 17мм.
Nice work,I probably put this in my list to do.I do make like this without motor self power to my daughters before long time ago,maybe it’s time to make like this anyway all I need is old motorcycle and used wheels.thanks for the video
Your daughters are lucky to have you as a father, I'm working towards being a engineer as I love anything to do with combustion/ electrical
Next time, make a toaster with a blender attached to the handle. It will be faster. Cool design though.
Nice love it ❤😊
Like how simple it is
A little bigger engine and you'll be revving on the circuits 👍🏼
Beleza muito bom 👍👍👏👏
Love it but one thing that would drive me crazy is alignment. It's crabwalking pretty hard!
Needs some better brakes as well
This man has never owned a measuring tape in his life lol
Good job 👏👏👏👏👏❤❤❤❤
I believe you could polish up you welding results with a mid-range mig welder, better suited for the types of projects your producing. Good luck !
Крутой аппарат 🎉🎉🎉🎉🎉🎉🎉🎉🎉
the best venihcle feom all of yours!! great! can u make F1 replica car :)? f1 gokart something like that
Cool idea!
Fun to watch but reminds me of the guy who built his own helicopter 😢
What happened to him? Im thinking to build my own helicopter.
Boa tarde! Qual as medidas desse chassi?
Yeah so sad for him because the propeller hit him in his head and he died instantly.. And he's from inda😢
F
That why safety is important...that boy not wearing any safety...
I watch a lot of these type videos b/c these folks are far more than mechanics..... lol, it's in their artistic ability that comes to
the surface & I like seeing how they solve different aspects of the build along w/ the fabrication of the piping. It's kool to see!
😂
That stick welding looks easier than flux core to me wow have to try this
damn fine lookin buggy :). everything looks fine, but is the enough space to seat comfortably even with motocross helmet on? because i wouldnt ride around without a helmet ... what kind of engine is that? looks like aircooled, or you just didnt installed radiator yet?
Dude, this thing has massive understeer and how much power??
Waiting for that axle to bent..lol. Looks like fun though.
good job ❤
Brother, how many cc is the engine?
179-200
🎉استمر
Well done bro did u just made that in 2 days .?
I think it needs a bigger engine 🤔, it's still a nice build
how long did it take pls!
Apprentice license. I'd hire him.
Am on a project my self can I ask you something '''?what's the lent of the base pipe
muito top! vc teria o projeto pra vender?
those axles are unsupported at the wheels
- going to bend going over forst major bump - front suspension linkage/steering just as sketchy
I want to drive IT so so bad😢
Please can you send the lengths of the sides 😅
great video bro.i love the fact that you dont have a nice clean garage with every tool known to man, just a piece of shit welder and a drill press made in the 60's. your whole approach gives me hope that i to can pull something like this off. thank you for making this video and sharing . it really is the best video o all f you tube inmy humble opinion
Moves good for having a scooter engine 😂
*لماذا لم تستخدم الموقف طيلة تجوالك حتى نهاية التصوير عندما أحترق المحرك حينها توقفت لوحدها* 🤔
saludo buenas quiero saber como se llama ese programa que usas para esa impresora 3d gracias
When you have a shitty bender - just fill the pipe with sand, cap it with some aluminum tape before bending and see the difference.
Nice work, though! ;]
good build. But this was one of the most "dead" videos i have ever seen. Not a single word
good work but you have everything missaligment. I hope you can do more measurement next time for better aligment
do you have any dimensions?
Looks like suspention not working at all...
Muy buena imaginación pero soldando deja mucho que decear
Дорогой друг пришли мне чертежи этого багги пожалуйста. Мне очень понравился!
Super-glued steering wheel?
Dude…
bro...how to reverse it
But bro what's abouts clutch
That poor little engine....
Руль без шлицивое соединение самоубийство
и зачем он нужен? моторчик от мопеда на такую банудуру...
Make pubg buggy
Porfabor medida
سفارش ساخت بدیم
Made in china 😂.....but all jokes aside nice work👍🏽
✌คว่ำลงบิดแขนไปมานึกข้อศอกคือพวกมาลัย😮
gkx shift car lenth bradth deatail please
9 month ago car
Give that guy some proper tools and machinery, he'll be dangerous... Good job working with what ya have tho.
👍👍👍👍👍🇺🇦🇺🇦🇺🇦🇺🇦🇺🇦🇺🇦😊
Gros nul
и так сойдёт
You have to be one of the best recyclers on the tube, I am constantly complaining that I don’t have enough stuff to make another project and you can turn one into another at will 😀🤟🏻 I applaud your dedication and effort and look forward to your next mobile steel coffin😊
Wow, thanks!
Thats wrong.
Amigo como esta excelente trabajo podría compartir los plano me quiero hacer uno
I dub thee the King of Integration By Parts. Long Live The King of Parts.
Huzzah!
Good work my friend, keep up the creativity❤💪
I enjoyed this video do you have a blue print for the cart i would like to build it
I love your build , very nice very talented , very good .
Thank you very much!
Top
To do something like this is brilliant.. it's a shame that he painted it.....what a pity. it needed a teroson put all over and paint over .. kind of raptor.. or even raptor but it's not worth the investment... to spray paint... it's shit..
аааааа ведь есть много инструмента включая трубогиб, ну почему же нет нормального полуавтомата? криво варить электродом, а потом зачищать насраные швы это прямо больно видеть
App bhohot gadiya banatehi lekin alag parts kew nahi use karte ho aki parts ko kew use karte ho parts nikalthiya eska gadika Kya huva sir
doesn't the rear axle move sideways, left or right? doesn't slide off?. I always have problems with that...
My favorite car❤❤
Did this guy use a tube instead of a bar for rear axle? How didn't it bend?
Where are you at? I notice lots of damaged buildings on your drive..
USA. It's is normal road 😁
mantap bang
Keren
Scrap
Nice work... only the front suspension with the arms are a bit weak. With this size of engine you would be ok but if you want to jump forget it...
Yes the arms need to be TIG welded first then heat treated and annealed. I actually would never go fast in any vehicle built in this manner those welds are subject to failure at any time.
Are the holes in the welds for ventilation? Do they make it go faster?
I want to doo something similar but i want to put my v6 fiero motor in it and make a sand rail and i want to do this all with my harbor freight titanium flux 125 welder anybody think its possible 😮 hit me up in the comments
А мне понравилось! Этот мужик вообще ничего не боится, делает как знает. Руль на 3d принтере и куски рессоры вообще шедеврально 💥. Забавно, что эта штука ездит 💪. Автору респект и новых проектов на фоне красивой природы 👍👋💯
Nice one Sir
looks good im just not sure why but everytime i see a four wheel with no differential it kinda annoys me for no reason
И не зря. Как мне кажется, тут ещё плохо настроен развал схождения, из-за чего повороты будут ещё труднее. А то, что отсутствует дифферинциал, то это иногда наоборот помогает преодолеть бездорожье из-за отсутствия механических потерь и неверного перераспределения нагрузки колёс
Задание колёса восьмёркой ходят
👍🏆🏅
Some of that welding needs looking at mate , great creativity though
Oh yeah? Well Pete if you are such a critic, then show us what you can do? Starting with my buggy frame, when you finished it I'll judge you, lol. Listen if everyone on YT was a goat welder, the majority would be too discouraged to have a go and then never get better or even have completed something of their own. Welding isn't my strongest skill, as a qualified Mech I wonder if it's okay for boiler makers to driver around with poorly tuned engines or malaligned suspension goemetry, or should we pull them up about it? lol.
Hola buenas noches las haces para vender
Quien pude costruir algo asi adaptacion para mi discapacidad. Estoy en colombia alguien me puede ayudarme los escucho
do you have a plan of this?
Lenkung funktioniert nicht, da hinten kein Differenzial
Rahmen bohrt man nicht an, da werden Ösen angeschweisst (Auspuff, Dach)
Motor zu schwach, kein off road möglich
Federung funktioniert nicht, Federn zu hart
Motor hat keinen Wind zur Kühlung, da Sitz davor
und noch viele Fehler mehr.
not sure how long those welds will hold up when he gets it off-road,
Acredito que ta errado o projeto, não mostrou a parte da corrente que passa a tração, mas da pra entender que como o motor esta fixo e o eixo traseiro se mexe, ele não pode pegar buraco senao estragaria a relacao da corrente, seria massa se ele mostrasse isso, mas até entao entendo como um pessimo projeto
Ótimo projeto você não teria as medidas
диаметр , толщина , марка труб , размеры ? масса рамы ?
Aí no final ele vai lá e fode com o motor taligado 😂😂😒 acha q o carro virou peixe pra bota numa poça dess e acelera
Pretty good work 👏 be great if had little bigger motor 😊
😮😍😍esta chidoo!! Solo que le falta mas velocidad .o fuerza pa dos pasajeros
Я тоже так думаю. Я бы добавил редуктор. Больше момент и + задняя скорость 👆
Great Work ✌️👍🇱🇷
Thanks ✌
Bravo ❤