BenQ SW240 Photo Editing Monitor Review by Art Suwansang
Вставка
- Опубліковано 14 жов 2024
- In this video, wedding photographer Art Suwansang from the University of La Verne, will introduce the BenQ PhotoVue monitor SW240, a 24.1" and Adobe RGB photo editing monitor. Find out what value and benefits does SW240 provide to entry-level photographer from this Video.
Get more information from:
BenQ SW240: www.benq.com/e...
Thank you for your great BenQ videos. What wolud be the best way to connect the SW240 monitor to an old MacBook Pro 17" late 2011? Thanks!
Use a DisplayPort - Mini DP cable. Connect to the 2011 MacBook Pro via Thunderbolt 2 port.
@@BenQGlobal Thank you! I tried that but then I found out that the discrete graphics card of my 2011 MacBook Pro unfortunately has been disabled.
Would it still be the best entrance monitor for photo editing? I have a macbook pro M1 Max and I need an Adobe RGB monitor to work with and I am considering this one budget wise... I was wondering about the big brother sw271 but not sure the resolution gets you so far to pay the extra 400euros... Thanks a lot for your wonderful reviews!!! 😊
well, it's a good one, And inexpensive. The best will run over $2,000.
Hi Art, i hv calibrated slot 1 2 & 3 for Adobe RGB, sRGB and Panel Native respectively what i see is there is green color cast on all of them, sRGB has more looks more desaturated, tried calling the local support he said to try changing with all cables, HDMI etc, as i was using DVI cable.
I just bought a Mac Studio M2 Max. Can it support this monitor SW240?
Do we need more than 1080p for any kind of editing?
Is the sRGB colour gamut factory calibrated?
The built in sd card reader does not show up when i check it in the device manager and when i insert the sd card, nothing shows up. Any fix to this issue.
Can u make a video comparing Benq monitors n Asus monitors plz thanks
Is this a good video editing monitor too?
I saw the height can be adjusted with the stand, what is the lowest height it can go? I have a camera set up behind my monitor , i am using a standard 24 inch monitor now, I need to upgrade a better monitor for video editing which can stay low without to blocking my camera lens, thanks.
What cable would I need to allow 10-bit color with this monitor on my Mac Mini M2 Pro? Thank you
sir shud i buy this 8 bit+FRC or wait for benq to launch a true 10-bit monitor in 24 inches 1080p. please suggest. i can wait. i hv i7 7700, gtx 1060 6gb and 16gb ram
No DCI P3 in the color space when you changed it with the button?
I cannot see the DCI - P3 mode under the menu. How do I set it to that mode?
What keyboard you use?
Hey i have a question, i am planning to buy a benq S W seris monitor for my photography editing work, i have 2 laptops , will the colours of the monitor change if i connect to a diffrent laptop. Or it will always show the hardware calibrated colors no mater which laptop is connected..?
Hi Art,I have just bought a new Apple m1 Mac mini to replace my iMac, is this SW204 monitor compatible to use with the Mac mini only I have heard a couple of negatives about compatibility? also what cables do I need to get the best connection between the two machines, (connecting these two machines is not my strong point) thanks.
Hi Ken, you can leave the message under the video from Art's personal UA-cam Channel, so that he can see your message. :)
Here's a link for your reference: ua-cam.com/video/4yJIea2UVp0/v-deo.html
Does it accept 24 Hz or 24 fps signal from black magic decklink card...?
I was wondering if the blank/black space on the screen between what is displayed and the bezel was normal. Yours does the same.. I guess that is indeed as intended. One thing though with a DVI cable I'm not able to adjust the Aspect Ratio. There is a checkmark beside 'Full' but I cannot select 'Aspect' or '1:1' if those were other options. Not sure I'm understanding that correctly if those are supposed to be 2 other options from which to chose.
Not sure what is happening here. But the black is normal. About the DVI if you need further help please reach out to me on my channel ua-cam.com/users/artisright
Art, Thank for the very instructional video. I'm in process of buying a Benq monitor, and have a couple of questions:
1. Is this display the same panel as used in the SW2700PT, but at a lower resolution?
2. I have a Datacolor Spyder 3 Pro. Can I use it to calibrate this display with the built in software?
3. is the SW240 your 4th generation monitor, or just the same panel in a smaller form factor?
Please let me know. Thank you!
Hi Gerry, check out imagescience.com.au/. It's a very informative website, they recommend Benq monitors.
What the point .. official Benq dealer in my country won’t import this product .. I have personally requested them for more than 10 units but they are afraid it will remain in stock. Why assign a dealer who doesn’t know how to sell. There no address mentioned in your official website to make such complain. I’m going for alternative now.
Sorry to hear this. What country are you in?
Is the SW240 still available in 2022? If not, what replaces it?
Wondering the same thing
Hi Art, I have a SW204, Have you had any issue if you do a calibration and then click on the colour tab in the display setting of a mac. For me the calibration suddenly changes and becomes unusable.. I'm really seeking help on this issue..
Hi Axyl, I have not had this issue. This is interesting and I would love to help out further. Let's connect over email. If you can reach out to me at info@wedding64.com I'll try my best to help you further. Also this is Art replying :)
Can this monitor be used for color grading?😊
of course...
@@AndiGomez-yu2dx Answered 4 months ago.... but thank you 😊
What does “hardware calibrated display “ mean.
means that it aint calibrated in software. They all come in the best gamut from factory.
Have it eye care?
Please don't get me wrong, I love the monitor, but I think the PME software isn't totally compatible with OSX, has anyone else noticed that the image changes if you click on the colour tab in the display setting?
Is it compatible with X-rite colormunki display?
what do you think
lmao BenQ couldn't make a video that wasnt grainy as fuck?