I still love my Punisher. Still my high flying truck in my fleet. The Kagama is gaining popularity and might have dethroned the Punisher sooner than later.
Awesome video! Crazy big air and one tough truck for sure..i did notice the difference after you added the m2c shock caps, definitely seemed to take off the ramp straighter and more level in the air😊
nice video im enjoying my agama iv ordered the shock towers from m2c and im awaiting there chassis release and them to bring out the shock caps witch are not available as of yet crcu is bringing out a lot of TI upgrades for the kagama so watch this space
Dam man. Between the curb and then losing power in the air, that went all right. Surprised about the rear d block though. These were supposed to HD on the new trucks.
I appreciate your time watching brother Jason. It's a damn tough truck foreal! I was surprised 😯. I believe that sideways landing on my first run did it.
Thanks so much. I appreciate your time watching. This truck is awesome. Here's the link for the ramp freshpark.com/collections/quarter-pipes?gad_source=1&gclid=CjwKCAiA_tuuBhAUEiwAvxkgTioQBZL1Q11E6gSocWdr1U5Ulup2ZOyl9df57DE7dcRw1k5If57eHRoC5jMQAvD_BwE
@@CommanderAstigRCThank you for letting me know I didn’t know they were that much, but I bet the quality is great. I also wanted to ask what 6S battery are you running on it?
@@CommanderAstigRCThanks again, did you have to change out the EC5 connector to an XT90 in order to run it with the ESC? Or were you able to get it with an XT90 connector?
@@CommanderAstigRC ya man love how you keep it honest no editing and if it breaks you show it.. I have a brand new TLR Typhon I have the corraly 825 motor with the 185 esc still have to get servo...also a 3s infraction will be upgrading that also I'm new to the hobby and if it's OK maybe if I have a question on set up or recommendations you can help with ask if I'm in a jam..eventually I'd like to start a channel and show these m2c products they do a damn good job..but thanks for the reply brother!
@@JamieFox-x4m of course brother. Consider me as your all RC related resource 👍. I'm here and always happy to help. Im Crisanthony Astig RC on Facebook. You can always message me there.
Thanks so much Aaron. This truck is tough AF Bro 😮💪. I'm super impressed with its toughness for sure. With M2C upgrades this platform is gonna be Awesome
I appreciate your time watching. freshpark.com/products/quarter-pipe?variant=40067596026047¤cy=USD&srsltid=AfmBOoqZbo9Qxbn8KBmdnzxlVWNwrDKAsBTmYZE3N717-SEy6jFhwYBPRJM
Great rig. Kagama has been great for me.
I appreciate your time watching brother. It's a great Rig overall. Props to TC for the innovation. It definitely exceeded my expectations.
KAGAMA!🫵🏿😡
@@jaymitchrc me too bro. I love this car.
I was gonna swap in my own motor and esc but the stock set up is amazing so no need to, love this rig
I appreciate your time watching brother. No doubt the TC stock electronics are really good 💯👍
Sick truck!! I remember when the punisher came out I loved it! My friend had one and it was awesome. Seeing the kagama is beefier is awesome
I still love my Punisher. Still my high flying truck in my fleet. The Kagama is gaining popularity and might have dethroned the Punisher sooner than later.
Yeah, I could see that happening with just how much beefOrr everything is on it…
Awesome video!
Crazy big air and one tough truck for sure..i did notice the difference after you added the m2c shock caps, definitely seemed to take off the ramp straighter and more level in the air😊
I appreciate your time watching brother. Good eyes Bro 👌. These zrs caps are legit and the improvements are very noticeable.
bro you launching that thing like 30 ft in the air. thanks for guys like you i dont have to drive mine extreme like this. lmao
I appreciate your time watching brother. This sucker can take a beat down for sure LoL 🤣.
@@CommanderAstigRC yea i just replaced my front left driveshaft last night. I dont know how it broke.
Dude those pavement landings were brutal! 👏🏼👏🏼 great session! 🙏🏻🙏🏻
Thanks so much Bro. This truck is indeed tough AF. It definitely exceeded my expectations.
Great Bash, This is one tough truck, soon to be M2C TOUGH!!!!! Thanks for punishing the parts!!!!
Thanks so much M2C. This is gonna be a killer platform. It deserves an M2C Tough badge 😁
Great run! They are tough. Ive cased mine a few times no issue.
Appreciate your time watching brother. Tough indeed man💪. I was amazed it survived the parking block landing LoL 🤣
Killer sends here my friend!
Man that chassis took that curb?? 😮😮😮
That's insane, Corally tough
Thanks so much my friend. Hella tough truck 💪 indeed. I was in total shock when it drove away from that brutal curb smack 😱💪🤗
great vid & bash bro. you earned a sub.
Thanks brother always appreciate it 🙏
Kagama!!!!! Chingow!! 🎉masterdom!!!
nice video im enjoying my agama iv ordered the shock towers from m2c and im awaiting there chassis release and them to bring out the shock caps witch are not available as of yet crcu is bringing out a lot of TI upgrades for the kagama so watch this space
I appreciate your time watching brother. The Kagama is an amazing truck. The upgrades will only make this truck even tougher, stronger Basher.
@@CommanderAstigRC what diff oil you running is it stock front rear and centre ?
@@marksrc-ri9jf all stock in this video. 50k front, 250k center 20k rear current setup
Dam man. Between the curb and then losing power in the air, that went all right. Surprised about the rear d block though. These were supposed to HD on the new trucks.
I appreciate your time watching brother Jason. It's a damn tough truck foreal! I was surprised 😯. I believe that sideways landing on my first run did it.
Amazing driving out there you really sent that Kagama flying high. I wanted to ask what ramp is that it looks awesome.
Thanks so much. I appreciate your time watching. This truck is awesome. Here's the link for the ramp
freshpark.com/collections/quarter-pipes?gad_source=1&gclid=CjwKCAiA_tuuBhAUEiwAvxkgTioQBZL1Q11E6gSocWdr1U5Ulup2ZOyl9df57DE7dcRw1k5If57eHRoC5jMQAvD_BwE
@@CommanderAstigRCThank you for letting me know I didn’t know they were that much, but I bet the quality is great. I also wanted to ask what 6S battery are you running on it?
@@diruelas Ovonic 5300mah 120c 6s lipo
www.ampow.com/products/ovonic-120c-6s-5300mah-lipo-battery-ec5?variant=43228285174004
@@CommanderAstigRCThanks again, did you have to change out the EC5 connector to an XT90 in order to run it with the ESC? Or were you able to get it with an XT90 connector?
@@diruelas I'm not 💯 sure. I believe they have an xt90 version. I had to do a connector swap.
I still see that tree branch the Xmaxx took out 😂😂😂
LoL 🤣. It was still there during my first bash of the truck. The Xmaxx really made it's damage on the tree LoL 🤣
Why wouldn't you move the ramp closer to the grass?
Good point but didn't wanna block the cars from coming through at times 😜
My hinge pin block is bent . What’s a good upgrade
The M2C blocks should be available pretty soon brother
Will the max6 combo fix n this?making it an 8s,?
Max6 ESC fits and can be bolted to the ESC plate however the motor is too big. I opted for the HS 4282 motor.
Thanks for the advice,, what’s your speed like,, any videos showing it,, definitely would appreciate, I’m also subscribed.❤ keep up the great work
@@deonhowardsr1904 installed but haven't tested yet due to bad weather. Hoping to get out soon. I appreciate your support Bro. Stay tuned.
Will m2c be making a chassis for this?
I appreciate your time bro. Hopefully soon🤞
@@CommanderAstigRC a extended chassis would be nice! No problem love your videos!
@@JamieFox-x4m loved that Idea Bro! That'll be sick! I appreciate your time watching brother
@@CommanderAstigRC ya man love how you keep it honest no editing and if it breaks you show it.. I have a brand new TLR Typhon I have the corraly 825 motor with the 185 esc still have to get servo...also a 3s infraction will be upgrading that also I'm new to the hobby and if it's OK maybe if I have a question on set up or recommendations you can help with ask if I'm in a jam..eventually I'd like to start a channel and show these m2c products they do a damn good job..but thanks for the reply brother!
@@JamieFox-x4m of course brother. Consider me as your all RC related resource 👍. I'm here and always happy to help. Im Crisanthony Astig RC on Facebook. You can always message me there.
Dam!! Some brutal concrete hits Chris! Impressed it survived with minimal damage 👍 Looking forward to the next run.
Thanks so much Aaron. This truck is tough AF Bro 😮💪. I'm super impressed with its toughness for sure. With M2C upgrades this platform is gonna be Awesome
What kind ramp is that can you provide me part number please I appreciate your help
I appreciate your time watching. freshpark.com/products/quarter-pipe?variant=40067596026047¤cy=USD&srsltid=AfmBOoqZbo9Qxbn8KBmdnzxlVWNwrDKAsBTmYZE3N717-SEy6jFhwYBPRJM