Yeah there’s no way that won’t snap right in the middle where that crack is. It could be an alright display knife I suppose. He did put a lot of manual effort into it.
I saw that too. It looks like it is going all the way thru the blade. Guaranteed the first time he tries chopping with that blade or putting it under any kind of real stress then it's gonna snap right at that spot
The gears are made of case hardened steel (a tempered steel to which has been increased superficially the quantity of carbon to make possible an induction hardening): not the best solution for a blade, which will be for sure tenacious but not with high hardness. Said so it looks really nice
Well sir, I see that you have made a mighty fine looking blade there but I can't help but wonder just how strong the blade is? I saw that when you were forging the blade and sanding it down that you had one big ole cold shut on the right side of the blade. I think if I were you then I'd be very careful using that blade. I suspect it will snap at that cold shut but it is a great looking blade just the same.
Gorgeous crack right in the middle of the blade ...
I was thinking the same thing 😅😅
Yeah there’s no way that won’t snap right in the middle where that crack is. It could be an alright display knife I suppose. He did put a lot of manual effort into it.
I would tested the crack be hitting the knife against something hard like a tree to see how sturdy it it was
Stop blaming about the crack u ain't blade Smith as do I
Two, actually….
This is a beautiful and magnificent piece of craftsmanship.
Какой же это каеф сделать такое своими руками и без спец техники. Молодец 👍 да, есть косяки, ну куда же без них. На ошибках учатся 💪 успехов 👍
Классный кукри браво мастеру молодец,сразу же себе такой же захотелось.👍👍👍🔥🔥🔥
Excilent work 🙋♂️👍
Muy buen trabajo te felicito desde España
Great Work, great effort, great knife, great art
The result is beautiful and flawless
That’s beautiful! Nice craftsmanship! 👍🏼👍🏼👍🏼👍🏼👍🏼👏🏽👏🏽👏🏽👏🏽👍🏼👍🏼👍🏼👍🏼
Лайк из Чечни 👍👍👍👍🤝
Beautiful work of art 👍👍
Дрель, болгарка и тиски, молодец
That is absolutely fantastic
Great skills and workmanship
Beautiful, lad. A pleasure to watch you work your art….
Трещина, образовавшаяся по результатам ковки, никуда не делась. Видна даже после обработки на обратной относительно заточки стороне.
Трещина от охложденного металла чеще греть
если трещина, почему звенит?
он когда обрезки отламывал, чуть заготовку не сломал! думаю хорошего удара нож не выдержит, можно было даже сваркой её заварить на крайняк
wow
There’s a great big crack through the steel where the bend is on the blade. That’s never right!!!
Yep, that fault will get worse.
could see the crack from the very beginning! why continue?
I saw that too. It looks like it is going all the way thru the blade. Guaranteed the first time he tries chopping with that blade or putting it under any kind of real stress then it's gonna snap right at that spot
I like your work ,especialy you're clever.👍👍👍good job
És um grande profissional..parabéns.
Definitely appreciate the effort. Those pinion gears are a beast.
I loved it. Great skill.👍
You are not blacksmith, You are grinder master!
The gears are made of case hardened steel (a tempered steel to which has been increased superficially the quantity of carbon to make possible an induction hardening): not the best solution for a blade, which will be for sure tenacious but not with high hardness. Said so it looks really nice
Nice
i was worried first with the big crack but the final result is just beautiful
What did he finsl temper it with? Pig shit was an old medium.
Near as I can tell the crack on the left face is still there. That's why we only see the right side in all the finishing shots.
@@TheG4m3r4life damn
It's a national weapon of Nepal who carries by Gorkha Warrior 🙏
Looks brilliant 👍 love your work
Meglio non è possibile 10 è lode
top
So better than germans Quality good Job
Wowwwwwwwwwwwwwww Mr Congratulations
Really Beautiful 😊😊
I love that knife at the end looking very nice....
Wow! You made an amazing knife. It's absolutely beautiful. You have great skills. Thanks for sharing.
Greetings from California
Looks great at the end though I do wonder about all of the cold shuts from the drill bit.
Crocodile Dundee would definitely approve👍🔪!!
I' like that kind of Jungle Knife. Very sharf and nice?
Simply amazing🍺👍
Magnifique travail merci beaucoup pour la vidéo 📹
Quanto uma dessas, muito linda belo trabalho parabéns
To die for ❤
Well done.👍🏻
nice kukri man
awesome
Мастер, что тут скажешь?👍 великолепно
Muito bacana linda faca 🗡️🇧🇷❤️💜👏👏👏👍🥀
It’s a Nepali Gurkha knife. 👍🏽🇳🇵
Trabalho magnífico parabéns isso não é pra qualquer um
Ela trincou.
Sniper is a good job, Mate
Nyimak sodara ku salam kenal dari jawa
Belíssimo trabalho, peça muito bonita... parabéns.
serio kkkkkkkkkkkkk
i came becase is from battlefield 1 good vid
goodjob😱🎉🥰
Show!! Sua técnica é muito boa. Parabéns e sucesso sempre pra você.
Beautiful excellent knife work
Simplesmente linda a faça, parabéns
Gorgeous. Well done!!!!
Well sir, I see that you have made a mighty fine looking blade there but I can't help but wonder just how strong the blade is? I saw that when you were forging the blade and sanding it down that you had one big ole cold shut on the right side of the blade. I think if I were you then I'd be very careful using that blade. I suspect it will snap at that cold shut but it is a great looking blade just the same.
I've never built a blade but that was my assessment as well.
ok
and l'm not sure about that burnt tip i saw, but agree , looks great
He almost broke the blade clean off when he removed materials with his pliers, so yeah, that blade is shite, whether he mended it or not.
Nice work enjoyed your work
Well there is a crack in it but hey blacksmithing is a learning experience, in terms of looks and what it originally was you did a good job.
Magnifique 👏👏👏
Very well done friend.
that is a very nice beast! well done. thank you. 😃
Супер 👍👍👍
Great job look perfect
Хорошая работа 👍👍👍
Beautiful Kukri... very well done!
woow awesome ;) great job
Wow bro you did it without any expensive tools ❤️ osm results
.
Gorgeous
Mantapu..bro
So Coool Notice me Sir 😍😍
Parabéns meu amigo, vc fez um bom trabalho
Gladiator 👍👍👍
Complimenti !!!!
Good job.
NICE💗🥀
looks amazing
Болгарка просто существует этот парень: Везде надо её использовать везде!!!
Beautiful show blade!! But I'm thinking not the strongest with that crack down the mid... 4:28-4:46
You my friend are a god
Nice bro
Привет не каждый так сумеет продолжай таком духе
Nicely done 👍
Great job!!
Has anyone here noticed the enormous size of the fissure in the middle of the blade?
yes
Oh yeah, it’s cause he didn’t grind the teeth of the gear. Also that tang has massive stress risers in it so it’ll break off super easy.
I seriously doubt this knife is still in one piece
Yes
Awesome craftsmanship love from India bro ❤🌷🙏🤗
Beautiful👍
Amazing great work man
Шикарная работа!Браво!!!!!Сделано с душой!
Muhteşem bir sanat eseri ortaya koydun. Bana hediye etmeyi düşünür müsünüz?
Support from Naga samurai
Как я понял, ты отжиг после закалки не делал.
👍👍👍👍👍👍👍👍👏👏👏👏👏
Very good man can you make tranch knaef 🐺👋🏽🇮🇶
👌👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Просто идеально, а главное без всяких специальных инструментах!
I agree!👍👍👍👍
Идеально? Глаза себе чуть не выколол пока смотрел.
Идеально что и где??? Дичайшие риски на спусках после болгарки и трещина (или заков) посередине клинка ?? Что идеального ??
Не идеально. Уровень типичного диайвайщика
@@НикитаВолков-ш1г ну дак, не мы такие жизнь такая!
Превосходный!
that was perfect
👍
Felicitaciones!!! Excelente
Very nice !
So beautyfull
Beautiful
❤️linda
أبدعت فتميزت تحياتي لك