Making boats using 4 Motor 775 Speed 25km / h | Boat 4 Motor 775, 14 nautical miles

Поділитися
Вставка
  • Опубліковано 26 вер 2024
  • I can see the metal propeller at high speed.
    Plastic propeller, stainless steel propeller
    The video is for entertainment only by normal crew so you should not try it at home.
    NASAT Channel is the home of crazy creations.
    I guarantee you will not be disappointed with the uploaded videos because there are some of the best videos that no one has ever made.
    Thanks and hope you will enjoy and not be disappointed with the time spent watching my videos.
    This channel is the home of crazy inventions.
    I guarantee you will not be disappointed with the videos uploaded because there are some best videos that no one has done.
    Thanks and hope you will enjoy and not be disappointed with the time spent watching my videos.
    Support the channel by subscribing to watch more awesome videos!
    If you find it interesting, Like, Subscribe and comment on your questions and ideas, the channel will support and create great videos for you ..
  • Наука та технологія

КОМЕНТАРІ • 1,5 тис.

  • @Nasatchannel
    @Nasatchannel  4 роки тому +25

    Chế thuyền chạy với 1 Motor 775
    Build a boat using 1 Motor 775
    ua-cam.com/video/WWliZ6T_zn8/v-deo.html

    • @aboabdoalep1272
      @aboabdoalep1272 4 роки тому +1

      Good idea bigger batteries is best
      But the challenge is making a bigger boat or buy a big one for 5 persons or more and the propeller must be movable in and out of water
      The fixed propeller mode for big ships where a steady velocity is required

    • @aboabdoalep1272
      @aboabdoalep1272 4 роки тому

      You can drive a big boat with 3 or 5 hp power motor 2800rpm 3 phase 110 volts via inverter
      The inverter can be energized by a direct 120 volt DC from batteries in series you must use 10 big batteries
      Consult an electric dealer for the avaliable inverters controller and wiring diagram, this type of parts is out of failure
      And charge them via a solar power in shore or in your house
      You can use trolly for loading boat for easy transport
      Big prjects is the best
      And you can get money from selling successful projcts

    • @giovannidioguardi8996
      @giovannidioguardi8996 4 роки тому

      abo abdo alep ..?

    • @Константин1980
      @Константин1980 4 роки тому

      Try to make three parallel propellers with 4-6 motors on each.Hello from Siberia

    • @anNguyen-kx9pw
      @anNguyen-kx9pw 4 роки тому

      Minh muon mua 1chiếc bao nhieu vay add

  • @vuaeco
    @vuaeco 4 роки тому +31

    Make a powered boat with no table, no shoes, no expensive tools, and no nails. You're my man!

  • @qahirshah6373
    @qahirshah6373 4 роки тому +31

    just wow... that why i appreciate the way people make new idea from 775 legendary motor.
    hey use mask for spary and fiber.....

  • @jamesmcginn6291
    @jamesmcginn6291 4 роки тому +11

    Wow. What an amazingly simple and practical boat! I imagine it eats up batteries, but you can bring lots of extra batteries. Great design. Thank you for sharing this.

  • @hallofieldday
    @hallofieldday 4 роки тому +1

    Thêm một bảng điều khiển năng lượng mặt trời cho nó và nó sẽ còn thú vị hơn nữa. Những bộ phim tuyệt vời. Trân trọng từ Ba Lan

  • @rcfundyer5739
    @rcfundyer5739 4 роки тому +45

    I'm surprised at how fast it is good way to travel around

  • @PHAMANGKHOA-qi9hl
    @PHAMANGKHOA-qi9hl 4 роки тому

    Rất là vui khi thấy video của bạn được nhiều người chú ý (có cả ngoại quốc). Thật sự rất khâm phục về mặt sáng chế của bạn, tìm kiếm những nguyên liệu xung quanh. Tôi ước mong rằng, với niềm đam mê sáng tạo của bạn, bạn hãy cứ tiếp tục nuôi dưỡng. Về mặt kỹ thuật, thì phải thật lòng, là không được về mọi mặt. Điều đó cũng đúng, nhưng không sao cả. Nếu như bạn tìm hiểu thêm nhiều hơn nữa về mặt kỹ thuật, thì chắc chắn rằng, bạn là một người giỏi. Thật sự, tôi không thể diễn tả hết niềm vui của mình. Thật tự hào.

    • @Nasatchannel
      @Nasatchannel  4 роки тому +1

      Khoa Phạm thật sự rất cám ơn anh!!

  • @amachalaamachalpu9366
    @amachalaamachalpu9366 4 роки тому +5

    Its made almost with nothing and you can go at 25kph! I am speechless ! Real inventor mind!

  • @KetansaCreatesArt
    @KetansaCreatesArt 4 роки тому +2

    Such an awesome project. How are you turning the boat's direction? You did not show the stearing mechanism.

  • @Wolfenion
    @Wolfenion 4 роки тому +10

    Well done, one of the best DIY builds I've seen. Very clever with the motor arrangement!

  • @АлексейТамлюк
    @АлексейТамлюк 4 роки тому +4

    очень хорошая работа! класс
    very good work! the! class

  • @phannhatsang2443
    @phannhatsang2443 4 роки тому +4

    Chiếc thuyền rất đẹp và video rất hay mong anh hãy ra những video như thế này nữa nha chắc a làm video rất mệt và lâu chúc a mạnh khỏe nha

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      Phan Nhật Sang cám ơn bạn rất nhiều nha, mình sẽ cố gắng

  • @phongdiy
    @phongdiy 4 роки тому +1

    Chất quá nasat ơi

    • @phongdiy
      @phongdiy 4 роки тому

      làm sao để liên hệ với các bác nhỉ? zalo em 0937604119 em muốn hỗ trợ ít đồ cho ae chế đồ tàu rc nhé

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      PHONG DIY là sao anh nhỉ

    • @phongdiy
      @phongdiy 4 роки тому

      NASAT Channel bác add zalo em đi nc cho dễ

    • @phongdiy
      @phongdiy 4 роки тому

      @@Nasatchannel bạn cho mình xin zalo hoặc face đê tiện trao đổi nhé

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      PHONG DIY anh cho em fb em kết bạn, e không có sài zalo nha

  • @DuyAnh-ox8jj
    @DuyAnh-ox8jj 4 роки тому +15

    Đag chạy gặp ghe lớn cái ngủm luôn a

  • @Daoquangngoc4000
    @Daoquangngoc4000 3 роки тому

    Kết nhất video này của a.có 4motor mà tốc độ ghê gớm quá

  • @thegeneral3094
    @thegeneral3094 4 роки тому +14

    You have the skills to build a big version and make money doing it.

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      Don Wallace thank you!

    • @pakde8002
      @pakde8002 4 роки тому +2

      Agree, this kid is going to be a success

    • @quetuimientay3342
      @quetuimientay3342 4 роки тому

      Anh mua môtơ odau vậy gia ca nhiu mong anh chi

  • @tuannguyenguitar1371
    @tuannguyenguitar1371 11 місяців тому

    Bạn thật giỏi! Tôi ngưỡng mộ bạn! Nếu một ngày nào đó tôi đóng chiếc thuyền cho riêng mình tôi rất mong được bạn cố vấn về kỹ thuật làm vỏ thuyền composit!

  • @friderc
    @friderc 4 роки тому +5

    Hello Brother
    Thats an amacing Boat with selfmade 4 Motors to boat you fresh in the Water!!! Thumbs wide up with Respect and salutations!!! You are a Selfmade Hero!!!!! And thats the true!!! One Subscriber more!!👍👍✌✌🇨🇭😎

    • @Nasatchannel
      @Nasatchannel  4 роки тому +1

      Fride RC Thank you very much !!

    • @friderc
      @friderc 4 роки тому

      @@Nasatchannel heey thatz easy!! I also loce to create some rc cars and hafe created a traktor with snowblower... i life in Switzerland , there we hafe also seas and lakes! But your boat is enorme!! Realy huge!! BRAVO!!!!!!!!!!!!

    • @creativeknowledgedaily7254
      @creativeknowledgedaily7254 4 роки тому

      You can order him one boat

  •  4 роки тому +2

    A thấy mấy thuyền mô hình đẹp quá. Anh cũng đang nghiêng cứu để làm chơi. Học hỏi e nhiều

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      KS Cảnh cám ơn anh nhiều nha

  • @oldshovelhead
    @oldshovelhead 4 роки тому +6

    WOW!!! Great build video! I really liked watching your build and seeing the results! Keep up the great work! :)

    • @Nasatchannel
      @Nasatchannel  4 роки тому +1

      oldshovelhead thank you very much!

  • @nguyendinhchuan
    @nguyendinhchuan 4 роки тому

    kênh toàn người nước ngoài xem vậy cơ mà vẫn ủng hộ kênh phát triển ạ

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      Chuẩn Nguyễn Đình cám ơn bạn nha

  • @gulfsurfco
    @gulfsurfco 4 роки тому +13

    Good for you to try your ideas!
    Many commentators are too afraid or not knowledgeable or creative enough to try.

  • @AndyRink
    @AndyRink 4 роки тому

    That's a great boat. And that with 4x775 engines. Incredible. Just great.
    Đó là một chiếc thuyền tuyệt vời. Và điều đó với động cơ 4x775. Không thể tin được. Tuyệt vời

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      Andreas Rink thank you very much!!

  • @dulichhonson8261
    @dulichhonson8261 4 роки тому +10

    Khâm phục. Like ủng hộ bạn rồi nha

  • @teonguyen6646
    @teonguyen6646 4 роки тому

    Anh này có óc tìm tòi và sáng tạo một công việc hữu dụng ,tôi tin anh sẽ phát triển hơn nữa , đây là hướng đi đáng mơ ước ,chúc thành công .

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      Tèo Nguyễn cám ơn bạn nhiều nha!

  • @Александр123-и2и
    @Александр123-и2и 4 роки тому +8

    Привет из России 👍

  • @BobsEVGarage
    @BobsEVGarage 3 роки тому +2

    Very cool video. A brushless outrunner would easily replace those motors, but you would also need a better controller and battery.

  • @gerardvoughnfaust4167
    @gerardvoughnfaust4167 4 роки тому +17

    That only means all motor are working well, coz if one or two isnt working well then its a burden for other motor. Anyway nice work you got there

  • @phiungchaualk91
    @phiungchaualk91 4 роки тому

    Mình thích ý tưởng tác phẩm của bạn. Đọc cmt thấy toàn người nước ngoài quan tâm. Người Việt xem thì khá ít, chắc họ đang bận xem gamshow nhảm, nhạc nhảm, phim tàu :3

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      Tasuke Kadoshi hihi, khoa học ở Việt Nam thấy ít người đón nhận hơn những cái vui vui bạn

  • @guttabeats7464
    @guttabeats7464 4 роки тому +5

    25.4 kilometers per hour = 15.783 miles per hour exactly. I estimated 16.5 km

  • @5phutsangtao-iQ
    @5phutsangtao-iQ 4 роки тому

    Quá đẳng cấp thế mới gọi là chế

  • @BIGWIGGLE223
    @BIGWIGGLE223 4 роки тому +3

    I wanna know if you had any issues with the 1st motor in the chain having more power than the rest and if you did what was the result? It looks like you're scooting at a pretty nice speed. Nice build! Now I am wondering just how fast she'd zip through the water if each of the motors had their own power supply???? Huh???Aybe next time??

    • @Nasatchannel
      @Nasatchannel  4 роки тому +2

      BIG WIGGLE It will be more powerful it each motor is powered separately

  • @vilv777
    @vilv777 Рік тому

    First time i see dc motor in series setting for boat... Good job

  • @johnnywilliams78388
    @johnnywilliams78388 4 роки тому +35

    Dude, you are more than welcome to have a beer in my garage anytime

  • @peterkay7458
    @peterkay7458 3 роки тому +2

    This is my favorite design . I am amazed at the speed.

  • @Cuong7779
    @Cuong7779 4 роки тому +3

    Bạn rất sáng tạo, thanks clip của bạn nhé, tiện thể cho mình hỏi bài nhạc từ phút 10:19 tên gì vậy bạn?

  • @vnl8817
    @vnl8817 4 роки тому

    Làm kiểu dág thuyền vát nhọn đáy đỡ ma sát tiếp xúc với mặt nước b à! Kiểu dág thuyền cản nước nhiều
    👌

  • @seomtv1915
    @seomtv1915 4 роки тому +8

    Pan chân chính của anh đây

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      Khương Nguyễn cám ơn bạn nhiều nha

    • @QuangNguyen-me6td
      @QuangNguyen-me6td 4 роки тому

      chân vịt bao nhiêu 1 cái v bạn

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      Quang Start 170k 1 cái nhựa nha bạn

  •  4 роки тому +2

    Hay quá em ơi. luôn ủng hộ e

    • @Nasatchannel
      @Nasatchannel  4 роки тому +1

      KS Cảnh cám ơn anh nhiều nha

    •  4 роки тому +1

      A e cùng chí hướng mà

  • @garypaxton8194
    @garypaxton8194 4 роки тому +4

    Well done mate inspired me THANK you

  • @geoffreycalligan9438
    @geoffreycalligan9438 2 роки тому

    14 nautical miles. At 13 knots. With model engines is super impressive. Really awesome man. great engineering.

  • @mevlogs194
    @mevlogs194 4 роки тому +6

    You must ready if you incounter a bigger than your boat those wave can tip you over

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      canine unit Thank you so much 😊. Bigger boats should be kept away from operation, due to the low body when encountering waves.

  • @markvaldez7843
    @markvaldez7843 4 роки тому +1

    The best electric diy mini electric boat build! Can't find a video that has simple and fast speed! This is awesome! For those little motors on a 12v

  • @ThinkMai
    @ThinkMai 4 роки тому +3

    You can make it more fast by using gears.

  • @quankp3652
    @quankp3652 4 роки тому +1

    Đoạn đầu kích thích quá!

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      quan kp 1987 hihi, cám ơn bạn nha

  • @franksantarcangelo1950
    @franksantarcangelo1950 4 роки тому +7

    Had to watch that again it’s so awsome you could sell those things ther that cool 😎

    • @Nasatchannel
      @Nasatchannel  4 роки тому +1

      Frank Santarcangelo Thank you very much!!

  • @phuonginh2813
    @phuonginh2813 4 роки тому

    Đẳng cấp quá 👍👍👍 🇻🇳🇻🇳🇻🇳🇻🇳🇻🇳

  • @ЛеонидНовиков-п1х
    @ЛеонидНовиков-п1х 4 роки тому +3

    такое соединени двигателей даёт интересный эфект

    • @manalit8
      @manalit8 4 роки тому

      Леонид Новиков какой?

    • @александрсердюк-ъ3и
      @александрсердюк-ъ3и Рік тому

      Если по пути один умрет, то остальные будут вынужденны его тянуть, тем самым ускоряя приближение собственной кончины.
      Как то так ...

    • @ЛеонидНовиков-п1х
      @ЛеонидНовиков-п1х Рік тому

      @@manalit8 Но а это возьмите и попробуйте сделайте замеры

  • @chungnguyenvan3119
    @chungnguyenvan3119 4 роки тому

    Hay rất hay em cứ tưởng nó sẽ chìm nhưng lại không chìm

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      Chung Nguyễn Văn sao có thể chìm được bạn

  • @loilieulinh2495
    @loilieulinh2495 4 роки тому +20

    dùng 8 motor , 2 chân vịt đi anh

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      Lợi Liều Lĩnh hihi, cám ơn bạn nha, có thời gian mình sẽ làm liền

    • @ammemaivang7627
      @ammemaivang7627 4 роки тому

      Chế 8 môtơ hai chân vịt mà một chạy phải, một cánh chế chạy trái mới dc nha kg là chạy kg đúng rất dở nếu chế dc cánh trái chạy rất dữ mà thuyền rất dễ lái Nha bạn, Chúc bạn làm clip hay

    • @pengrajinkeseniandayakngaj5098
      @pengrajinkeseniandayakngaj5098 4 роки тому

      Mantap Wal ai.

    • @hoidautranhoi940
      @hoidautranhoi940 4 роки тому

      Bạn chế hay quá
      Mình muốn chế 1 cái ghe hoặc thuyền mà ko biết mua những đồ mô tơ chân vịt bộ điều khiển ở đâu bạn gọi chỉ cho mình tí đc ko mình cảm ơn bạn đt của mình 0977657554

    • @laimai3
      @laimai3 4 роки тому

      Có bán ko a 0348335527

  • @rickyfrost1068
    @rickyfrost1068 Рік тому

    Thailand people is the smart brain,👍👍👍.

  • @phucthien7961
    @phucthien7961 4 роки тому +2

    Quá đã anh ơi

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      phúc thiện hihi, cám ơn bạn nha

  • @gioha3967
    @gioha3967 4 роки тому

    Không nghĩ là nó có thể nhanh vậy, bạn làm hay quá

    • @Nasatchannel
      @Nasatchannel  4 роки тому +1

      Long Thành Fit cảm ơn bạn nha!

  • @abdeljalilpr2033
    @abdeljalilpr2033 4 роки тому +2

    Ma shaa Allah! Good job

  • @shaniyadav0000
    @shaniyadav0000 4 роки тому +1

    Nice good

  • @whendeathdeclareswar7458
    @whendeathdeclareswar7458 4 роки тому +12

    If you take them metal caps of the motor, it spins faster.

  • @davidbrewer7937
    @davidbrewer7937 4 роки тому +1

    It's an interesting way to link the force from a number of DC motors...I haven't really stopped to have a good think about the good & bad parts of the application from an Electrical Engineering stand point but...interesting all the same

  • @thoaithanh2958
    @thoaithanh2958 4 роки тому +3

    4 motor cảm thấy dư sức của nó quá nhỉ

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      Thanh Thoại•92 mình thấy hoạt động cũng ổn mà bạn

  • @Jonathan.D
    @Jonathan.D 4 роки тому +1

    I am surprised how fast it is. You should get some 2.5cm foam sheets and cover them with fiberglass. It would weigh less and ride higher in the water. Can't wait to see the next project.

    • @Nasatchannel
      @Nasatchannel  4 роки тому +1

      Jonathan D Thank you very much, I’ll do it soon, so I can run at a higher speed

    • @modelnutty6503
      @modelnutty6503 4 роки тому +1

      yup, use epoxy to not eat the foam, couple wood stringers for strength.
      you can skin the foam with really thin wood first for hardness.

    • @Jonathan.D
      @Jonathan.D 4 роки тому +1

      My uncle made a hydrofoil race boat out of foam skinned in woven roving fiberglass. Like mentioned above be sure to use epoxy resin so the foam doesn't melt. Lol

  • @khachuy6635
    @khachuy6635 4 роки тому +5

    Hay like ❤

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      Huy Vũ cám ơn bạn rất nhiều nha!

  • @vuinhacmientay6191
    @vuinhacmientay6191 4 роки тому

    Này chơi thêm tấm pin năng lượng sạc nữa là hết bài......Chế đi bác

  • @davidgolia
    @davidgolia 4 роки тому +8

    I’m very curious to see how he stepped on his “micro boat”. Because I don’t think that he can move too much on it. But why he didn’t make it a little bit bigger?!

    • @Nasatchannel
      @Nasatchannel  4 роки тому +1

      David Golia It can carry 2 people, but making it bigger will be safer.

    • @lotuselanplus2s
      @lotuselanplus2s 4 роки тому

      Maybe just because it was an experiment, then if it works you build a better one and maybe sell the first one to someone.

    • @creativeknowledgedaily7254
      @creativeknowledgedaily7254 4 роки тому

      So Attractive

  • @ThuanDuong-pv3xu
    @ThuanDuong-pv3xu 4 роки тому

    dùng 2 khoan pin lớn vừa rẻ có điều tốc và không cần thêm bánh lái 1 trong 2 khoan ngừng thì "quẹo", chế thêm bộ chuyển chiều quay 2 khoan để làm số lùi
    Using 2 drills (battery drill as makita, boss, china...) , you have a boat and needn't have a helm . One of drills stops , the boat will turn left or right , A switch to control the direction of rotation of the drills to have a reverse gear

  • @UserUser-sc8pd
    @UserUser-sc8pd 4 роки тому +5

    Azərbaycanan Salamlar ! 👍

  • @theuonginhT
    @theuonginhT 4 роки тому

    Cho thêm dớt vào ổ nhông để bớt tiếng hú. Tuyệt Lắm nheng.

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      thế đương đinh em có cho mỡ bò và nhớt vào ổ nhông, nhưng nó vẫn phát tiếng, chắc e phải thây loại nhông khác cho im hơn

  • @pertevonur471
    @pertevonur471 4 роки тому +2

    Amazing.....

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      pertev önür thank you very much!

  • @Hoangnguyen-ww8rn
    @Hoangnguyen-ww8rn 4 роки тому

    Bạn có đầu óc rất là hay

  • @beargrylls1
    @beargrylls1 3 роки тому

    Если живёшь в отдельном доме, а не квартире, то имеет смысл завести верстак, и небольшую мастерскую. И соблюдай технику безопасности, брюки, закрытая обувь защита органов зрения и органов дыхания и прочее.
    А так, молодец, это же круто, но нужно расти в этом.

    • @Nasatchannel
      @Nasatchannel  3 роки тому +1

      Спасибо, пытаюсь реализовать эти правила техники безопасности.

  • @kientran9077
    @kientran9077 4 роки тому

    Thấy cả kênh người nước ngoài vô cmt, good job boizzzz

  • @NguyenHieu-jp7gd
    @NguyenHieu-jp7gd 4 роки тому

    Sáng tạo. Chúc em thành công hơn nữa

    • @Nasatchannel
      @Nasatchannel  4 роки тому +1

      Nguyễn Hiệu cám ơn anh, e sẽ cố gắng

  • @ajiusmanto
    @ajiusmanto Рік тому +1

    Luar biasa dengan satu catu daya 12v berukuran kecil.

  • @tgirard123
    @tgirard123 4 роки тому +1

    Absolutely spectacular!!! You take a handful of things and make yourself Transportation. You are the epitome of a maker. I was blown away on how fast it went and the wake it was producing. Just a really fun video Congrats. just curious, Where are you?

    • @Nasatchannel
      @Nasatchannel  4 роки тому +1

      Timmy Girard Thank you very much! I am in Vietnam, I will try harder.

  • @phutran-lr4zc
    @phutran-lr4zc 4 роки тому +1

    Hay bạn

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      phú trần cám ơn bạn nhiều nha

  • @HoangVo-vz8xo
    @HoangVo-vz8xo 3 роки тому

    Hay wa ban oj,ban la thien tai 👍👍👍👍👍

  • @trileminh5283
    @trileminh5283 4 роки тому

    chỉ 1 minh mà lam được hay lắm a trai ơi

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      Trí Lê Minh cám ơn bạn rất nhiều nha

  • @gaminghvl9377
    @gaminghvl9377 4 роки тому +1

    Cũng mê sáng tạo mà làm ba cái tào lao, bh ms gặp kênh này thật thú vị❤

    • @Nasatchannel
      @Nasatchannel  4 роки тому +1

      Gaming HVL cám ơn bạn rất nhiều nha

  • @DavidS-wm9ud
    @DavidS-wm9ud 4 роки тому

    Wow!!! Just wow!!!! So exciting and refreshing to see someone who's clearly not from the "richest" of circumstances, doing so much with what he's got!! Clearly has talent and vision, really hope you're able to make something of it all. As others have said, you should sell the things, anyone selling veges with one of these would be on their way home before the others were half way to the market!!
    And, I might be presumptuous in saying this, but don't worry at all about what anyone may say along the way! You my friend, belong to a special group of the human species called "the greedy ones"!!! These are the people who drive big dreams, who push the boundaries of existence, they're the one's that try flying, but then want to fly without wings, they're the ones who want phones, without buttons, or cars without old fossil fuels, these people literally conjure up the future!! From Steve Jobs, to Elon Musk, from Nikola Tesla, all the way back to Leonardo Da Vinic, they're all part of this elite group called "the greedy ones" because for them, there is so much more in human existence, so much more that can be achieved.
    So, seriously, very well done!!! I hope you, and other folks like yourself, will really press onwards and upwards, harder and faster, it's amazing to see what can be achieved :)
    My only advice, really would be, find yourself a good trust worthy business partner, who can take care of the business end while you take care of the innovation! We all need our trusty old Eric Shmidt!!! And take all that you've gleaned from making these, and turn out something that will really impact and revolutionise your community and beyond. Try and really make people see that you're not just some guy doing it all for himself, but that you can also make a difference and an improvement for your people :)
    And if you want to do an extra amazing/cool experiment, not that your current one was lacking at all, but maybe you could make a little jet boat, you could make it not need a rudder, it could be completely jet based!! I think that would really be useful for any shallow areas, and could really simplify the drive train for you :) Just a thought anyway, you clearly don't need any i don't think :)
    Very well done!!!

  • @NguyenTam-uz5ld
    @NguyenTam-uz5ld 4 роки тому

    Nếu bạn thiết kế lường ghe và mũi ghe lại cho rẻ nước tốt hơn tốc độ sẽ cao hơn nữa....

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      Nguyen Tam cám ơn bạn nha, mình sẽ cố gắng khắc phục

  • @khanhta7552
    @khanhta7552 4 роки тому

    Anh làm nhiều nhiều video giống như vậy đi anh😅😄😄

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      khanh ta mình sẽ cố gắng, cám ơn bạn nha

  • @lpjunction
    @lpjunction 4 роки тому

    It is a boat that you can carry home.
    Well done.

  • @Tixetai2024
    @Tixetai2024 4 роки тому

    Làm thêm phao nổi 2 bên,ở trên gắn thêm tấm pin năng lượng mặt trời nữa là ok

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      Do Trung : Xe tải hạng nặng : cám ơn anh, có điều kiện e sẽ làm

  • @thethoughtmaster
    @thethoughtmaster 4 роки тому

    NASAt??? are you the guy who makes space shuttles for the USA 😲 Great fun, I made one 10 inches long in school.

  • @joechuong
    @joechuong 4 роки тому

    Mặt dưới của thuyền nếu xử lý láng hơn, giảm ma sát nước thì sẽ còn nhanh hơn nữa đó :)

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      Vo Duy Chuong cám ơn anh đã góp ý nha, e sẽ khắc phục

  • @whitesand5325
    @whitesand5325 4 роки тому

    Very Good Video. I appreciate you. It was really nice.

  • @TiredoftheBS1562
    @TiredoftheBS1562 4 роки тому +1

    Well done.... best of luck from AUSTRALIA....

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      Crypto Blockchain thank you very much!

  • @nhutminhpham98
    @nhutminhpham98 4 роки тому

    Chế cái này vào miền trung để đi chơi có lý á 😄😄😄😄

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      Nhựt Minh Phạm hihi, có thể đi 2 người dạo sông im đã lắm bạn

  • @sonphong3161
    @sonphong3161 4 роки тому

    Bạn mua tấm alu đỡ phải chống thấm nhiều,và đa dạng màu sắc

  • @QuocKhang2812
    @QuocKhang2812 4 роки тому

    A làm lại động cơ V6 đi. Mỗi bên 3 motor truyền 1 trục... Bảo đảm chạy bao phê

    • @Nasatchannel
      @Nasatchannel  4 роки тому +1

      Bruce Trương có điều kiện mình sẽ làm thử nha bạn

  • @top0001000
    @top0001000 4 роки тому

    красавчик. но слишком маленькая лодка. Редан был построен, но чтобы выйти на глиссирование, слишком большое водоизмещение для такой тяги. А "мерный квотер" уже узнаю сразу.

  • @valeriyvasilev9165
    @valeriyvasilev9165 4 роки тому

    Очень позновательное видео

  • @rcfundyer5739
    @rcfundyer5739 4 роки тому +1

    What a cool little boat thanks for posting

  • @anghoang1088
    @anghoang1088 4 роки тому

    Hay, nhưng mình k hiểu tại sao k chống thấm mặt ngoài để tuổi thọ ván dc lâu hơn, vì chống mặt trong bên ngoài gỗ vẫn thấm nước nhanh hư ván, ý kiến cá nhân

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      dang hoàng mặt trong mình gia cố, mặt ngoài mình lăn nhiều lớn keo không chống thắm nha bạn, mặt ngoài thêm sợi sử lí láng cực lắm bạn

  • @ulrichvlogs85
    @ulrichvlogs85 4 роки тому +1

    Hay quá bạn ơi

    • @Nasatchannel
      @Nasatchannel  4 роки тому

      Ulrich Vlogs cám ơn bạn rất nhiều nha

  • @gecal556
    @gecal556 4 роки тому +1

    Good work! I am curious, how long is the battery life? Do the motors get very hot? Can you tell me about the battery you use.. capacity, voltage and chemistry? Thanks for sharing this project.

  • @danangsucahyono4934
    @danangsucahyono4934 4 роки тому

    Mantab ... boss . Sangat kreatif .

  • @fiks8888
    @fiks8888 4 роки тому

    Và tại sao bạn luôn làm cho đáy thuyền không đều? Tại sao ngưỡng này ở dưới cùng - Chỉ ngăn nước chảy trơn tru.

  • @enginemaster01
    @enginemaster01 4 роки тому

    I love these videos

  • @mihavatovec337
    @mihavatovec337 4 роки тому

    Thanks for video now i see that 4 motors will almost go to fast for my project

  • @kiess2282
    @kiess2282 3 роки тому +1

    good job on building the motor
    can you listed all the parts you used to build it? I want to try it...Thank you very much

    • @Magma_Boy
      @Magma_Boy 2 роки тому

      He used plywood, fiberglass, 4x 775 motor, and speed controller and battery's. Not hard to find in stores👍

  • @trongkhangnguyen3237
    @trongkhangnguyen3237 4 роки тому

    4 con motor 775 thêm cái giảm tốc đề xe máy mình thấy hơi dư lực, thử tính lại tỉ lệ truyền xem có tăng thêm tốc độ đc k bạn. Vả lại nên dùng cái bình to hơn đi, xài bình 7.5A ko đủ tải đâu. Châm thêm nhớt hay mỡ vô bộ giảm tốc với, nó hú ghê quá