Anh cho em hỏi, em setup trên dự án sample đã ok, hiện tại em đang setup trên dự án riêng, khi vào design đến phần create datum atta thì không thể indentify tube of datum pipe. Mong anh phản hồi, cảm ơn anh!
hi em, a co nhan dc mail em, de a ranh se tra loi. Tuy nhien nhung loi nay a da trinh bay kha ro trong video, em co the xem lai ua-cam.com/video/PPyOQ9Vjukw/v-deo.html
em đã set up được mds nhưng khi tạo datum attechment kích chuột vào ống thì không load được thông tin của ống vì vậy không xuất hiện được bảng ancillary selection, A biết nguyên nhân và cách khắc phục không anh. em cảm ơn ạ
Thank you for the video I am using 12.0.sp4.10. Afrer complete process as mentioned i have found 2 issues. one is in paragon i ddinot find "ACTIVE CONTROL" option and 2nd issue is "license not exist" error came when select MDS in design. How can i resolve this errors?
sir i get "license does not exist" error also if i get in i am unable to select pipe datum after selecting create pipe datum tab please help me sir very urgent ... i will be so blessed if you help me with this difficulty sir.. please reply sir...
if you get "license does not exist", it mean you wrong when active license. You can review my video step by step and check one more to get the license. I think if you follow step by step, you will be OK.
Sir, could you please help providing video how to edit dimension on template standard support. Because each project different dimension for u-bolt and others. Thanks
hi bro, I received your email. I think maybe you didn't install MDS when you install PDMS. Because I use PDMS ver sp05 so that there are some difference. Btw, you can review this video at begin because I noted some thing before you install PDMS (add MDS module)
Bro i am unable to select the (identify the tube datum point) and while creating trunion supp it's showing error (the MDS material is not set.......) Plz attach your email address
hi, what's the PDMS ver you are using ? I think all file *.exe will be created when we install PDMS. If no have maybe you have to check the virus software or reinstall. Thanks for your watching
Hướng dẫn từng bước rất chi tiết. Thanks.
thanks thầy Tân
Anh cho em hỏi, em setup trên dự án sample đã ok, hiện tại em đang setup trên dự án riêng, khi vào design đến phần create datum atta thì không thể indentify tube of datum pipe. Mong anh phản hồi, cảm ơn anh!
hi em, a co nhan dc mail em, de a ranh se tra loi. Tuy nhien nhung loi nay a da trinh bay kha ro trong video, em co the xem lai
ua-cam.com/video/PPyOQ9Vjukw/v-deo.html
Hi Sir,
I have pdms12 and12.1on my system why doesn't exist mds on 12.1?
What i should do?
Thank for your help
Hi sir, can you please share tutorial video on cabling system and cable trays
WHEN @ PARAGON MODE I'm getting an error " /MDS/PRELIMINARY/DEFAULTS/MPU/DATA must exist to modify preliminary design parameters ". How to solve this?
em đã set up được mds nhưng khi tạo datum attechment kích chuột vào ống thì không load được thông tin của ống vì vậy không xuất hiện được bảng ancillary selection, A biết nguyên nhân và cách khắc phục không anh. em cảm ơn ạ
em vào paragon check spec của ống em đang tạo support. Spec này phải có purpose là "pipe" nhé
@@PDMSFORBEGINNER em sẽ làm theo e cảm ơn a nha
Thank you for the video
I am using 12.0.sp4.10. Afrer complete process as mentioned i have found 2 issues. one is in paragon i ddinot find "ACTIVE CONTROL" option and 2nd issue is "license not exist" error came when select MDS in design. How can i resolve this errors?
1. you have to run mds with pdms
2. maybe the install not active full
@@PDMSFORBEGINNER so how can i resolve it because i already ran mds with pdms.
me too face the same problem, pls give solution.
sir i get "license does not exist" error also if i get in i am unable to select pipe datum after selecting create pipe datum tab please help me sir very urgent ... i will be so blessed if you help me with this difficulty sir.. please reply sir...
if you get "license does not exist", it mean you wrong when active license. You can review my video step by step and check one more to get the license. I think if you follow step by step, you will be OK.
Sir, could you please help providing video how to edit dimension on template standard support. Because each project different dimension for u-bolt and others. Thanks
noted
HI
it's working but (Licence does not exist.) message.
this MDS setup we have to do each project?
hi, for others project, the procedure is the same this video.
Thanks dear.
Hello Bro,
Can you please provide video to generate MDS Pipe support detail drawing in Draft Module
hi you can watch this video
ua-cam.com/video/EBBomGD-rko/v-deo.html
@@PDMSFORBEGINNER
Thanks Bro
hii,
license doesnt exist..
how to solve it
Hello sir Thank you so much.
I did't get RUN MDS. I send screenshot through mail . Please give reply. Thank you so much
hi bro, I received your email. I think maybe you didn't install MDS when you install PDMS. Because I use PDMS ver sp05 so that there are some difference. Btw, you can review this video at begin because I noted some thing before you install PDMS (add MDS module)
Bro i am unable to select the (identify the tube datum point) and while creating trunion supp it's showing error (the MDS material is not set.......) Plz attach your email address
Sir,
I followed all steps, when I am creating support.
"create datum support atta"
When I am selecting spool, its not working for next steps.
You have to check spec of pipe and sure that spec have MATPURPOSE CS. The temp. has also uodated. Hope you'll OK.
Sir,
I followed all your steps again, but still PDMS unable to upload support.
Not uploading datum support
Showing error
(2287) internal error- Expected check value not found in ATPOP
@@khanfiroz6838 pls check the new video
Sir
admin module is only available to users with free access
Above error coming sir
What to doo
Shivappa Ag it means you have to use SYSTEM user with pass XXXXXX to access. Thanks for watching my video
@@PDMSFORBEGINNER
Please sir make video on slope connection (piping)
@@shivappaag4136 LESSON 7 : HOW TO CREATE SLOPING PIPES AND PIPE PENETRATION. Maybe the subtitle is not included. I will try update later.
I have an issue while creating datum pipe.datum point is not creating I gave temp 70 only but why it's not creating
@@shivappaag4136 Did you check the MatPurpose of spec HAVE CS OR UNSET ? If unset you have to update to CS. You can review the video. Thanks
Hi have a issue. When I going to do Run MDS with PDMS error (sorry. Can not find mon.exe within your PDMS EXE) I’m very much thank to you.
hi, what's the PDMS ver you are using ? I think all file *.exe will be created when we install PDMS. If no have maybe you have to check the virus software or reinstall. Thanks for your watching
PDMS FOR BEGINNER
Thank you so much for your reply.
Just now I reinstalled it and downloaded from P30 web site. I will try again and let you know.
Now I’m facing other error message
PDMS monitor has stopped working
Windows can check online for a solution to the problem.
And one more thing if you explain how is the setup for existing project. Or MDB
I’m very much thank full to you.
@@araufanwer maybe the file .bat and evars was wrong the path which link the place of your project. Pls check again
Sir
Please make sp3d installation video i tried so many times i'm unable to install.
Santhosh Triangle sorry me too, but i will try to study
Install offline
hi
Licence does not exist.
hi, license regarding the way you install PDMS, maybe you have to reinstall PDMS again. I think you should use ver 12.0.SP5
12.0.SP6
sir speak in English