Great video! What I like the most, is that you cut the wood outside and on your table. I watch other DIY videos by people with a huge warehouse in their garden and every tool available to them. Your video makes me think I can have a go at this myself. Thanks
Haha exactly... "First you're going to want to find a nice tree in your personal forest and start by cutting it down and running your wood through a plainer.."
@@DH0071 drill machine, stone drill, plugs, deadbolts fitting with the plugs, a jigsaw and a normal saw or circular saw to top the standing pole. Oh, and something to dig a hole, mix your quick concrete and a hammer and some other small hardware to keep the pole upright whilst the concrete is setting. Pretty minimal, with some basic tools. The jigsaw isn't necessary perse, it is nice for the ornamental cuts, but using some straight angled cuts should work out great too (circular saw, or normal saw)
Always enjoy watching your videos. Straightforward and simple, no overdone commentary or loud music. Will use this when building mine this Summer. Stay safe and healthy, Joe!
Many thanks Joe. You are a really good presenter and explain things simply and clear. Just the right balance of letting us see what you are doing but also explaining what you are doing and why. Great stuff and all the best.
Just finished this with bamboo rolled on top attached with fence staples. Looks awesome, great video. Used fencing rails for the rafters and would recommend useing planed timber for the post uprights if you can afford it. Used clear silicone round the gaps in the joints etc. This from an amateur diy er 😃
Thank you, Joe. I have been debating building my own due to the increasing delays in buying one. You have convinced me, and made it look so easy. Excellent explanatory video.
Shoud've made the ledger board level with the brickwork for aesthetic reasons...it's only a few millimetres. Would have looked better to the eye and easy to do......Maybe I'm wrong?
This is an amazing video and exactly what I was looking for. I so appreciate the step-by-step instruction with different angles. This is how to make a diy video. Much appreciated!
Great video, very clear instructions. Don't forget to add a can of sealant to your budget and procedures. Every cut should be sealed, and depending on the size of the hole and treatment method, every hole needs to be sealed as well. Especially if that wood has a warranty.
V good video. I built one of these years ago and grew climbing plants on it. Only thing was if you sat under it in rain it was wet so we added some clear top panels to provide some cover. That worked well but you had to maintain them regularly. I'm in another house now and planning building one and fixing a pull out awning on one side. That will neatly hide away when it's dry but allow it to be covered if it's raining but warm. We are going to put a table and chairs under it.
I used fence post brackets to secure mine to the ground. You can buy some really fancy ones that hold very firm and it makes it easier to remove and saw if needed.
Would definitely help! We ended up painting the structure with wood preserver afterwards but adding some to the joints before hand would have been the best bet for sure 😊 Joe
Good to hear a local voice on YT! Its a good design that is easy on the eye. I am going to do one myself but i will be adding glazing bars on it so it can be used all year round!
Hi, First of all thanks for uploading your video. You make it look so easy, you deep are your notches for the beams, as you've gave me inspiration to try and build one. Once again thanks for the video. Cheers Gerry
This video was great, I love how you demonstrated everything clearly without complicating for the novice diy person. I used your help and just finished building my own in 2 days! One question, I’d like to secure the cross beams as they’re not all tight, what would you suggest for this and how please? Once again thanks for all the help with this video.
Absolutely brilliant job! Nice and simple, plus easy to follow instructions 😊 I plan on making this in the next few months with my 11 year old son. A fantastic mother and son project 👍🏻👏🏻🙏🏻
Awesome. Watched this and built my own. 3m x 4.8m cost of timber was 230 and another 35 ish on extras, 270 tops, in shops was looking around 600 for the size. Well worth it, only tools used was my drill, screwdriver, saw. Took me say 7 hours on a Saturday and another 3 on the Sunday to do some finishing up and adding trellis for some climbers. Wife's pleased so all good 👍
@@katebohan17 wish I could add a pic and show, it's 4.8 wide, 3m deep, 2.4 high. I have 7 uprights, because its on top of my decking I wanted to make it 100% sturdy and solid. so 3 uprights bolted to rear of house, 4 at lawn end, one either corner 2 in middle to create a archway to lawn, left side has our boundary fence, right has wall from extension half way, rest a 90cm fence, lawn edge also has a 90cm picket fence with a gate in the arch section for access to garden, on top I have 6 3m lengths evenly spaced, I have 10 39mm x 18mm 2.4m battoning to make 5 4.8m horizontal lengths and 4 of the same over the top for climbers. Added a star jasmine and bridesmaid clematis. Oh, and it's not on a tilt because it has no fixed roof so no need to worry about water collecting, but my last job for it is to figure a way to add a retractable canopy for shade when too hot as it gets the full fun. Hope helped 😀
@@RKaye87 sounds awesome..you can buy the retractable blinds..put some thin metal rope wire around the edges with hooks in the corners attaching it. You can buy the retractable roof curtains with the accessories too.
You've inspired me to step way out the comfort zone and replicate this DIY solo. Thanks for all the different camera angles and step by step made simple.
Great video. I am getting ready to build one myself. For 8x8 patio area, I am going to use 6x6x8 for my posts. Then 2×12 ×10 for my beams, but I and double beaming my posts. The 2x6x10 rafters and For the lids 2x2x10 also I am using metal brackets for all corners and fasteners. I feel it will be better against the elements with this type of support.
Been looking at videos to see how it's done and get ideas Your video made it look so easy Wish you had put a roof on it tho as that's what my ideal pergola will be
Great job, nice and easy and well demonstrated. I don't understand why people put these up without covering them. This side of the world it rains all summer. I suppose for creepers and hanging baskets maybe?
Thank you so much for this video. I told my partner that I wanted to build a pergola on my own and described exactly how I was going to do it (basically step by step same as you) and my partner told me that I was being ridiculous and it wouldn’t work the way that I said. I used to video as proof that I was right and i can in fact do it on my own and the way that I said 😅
Nice one for putting the video up I’m going to be building myself on to go over my pond. But not going to put the post in the ground I was going to use post brackets what’s your opinion on these?
Less than 1:30 in and I've seen the best depth gauge trick ever haha. I never once thought to use tape. Obviously a trick of the trade, but I'm a simpleton and that was an eye opener. Great vid as well, am here as about to build my own!
It probably makes sense to treat the exposed cuts with something. Depending on how your wood was treated, the core might still be untouched. Nice video BTW!
Thank you very much for the video, very clear and I'm going to give this a go myself. What model Dewalt jigsaw did you use, can you recommend one? Many thanks.
The kits are really pricey. Timber prices at the moment aren’t helping either. Hopefully that will change soon 🤞 pop up gazebos are great though. I use one to get out of the rain when making stuff haha 😊 Joe
Great video. Have to make one and have a quick question if don’t mind. Is it okay to put a post directly into concrete or is is better to set a steel foot into the concrete and place the post in that?
Great video - best on the subject I've seen :) Can you tell me though - what if you wanted to tweak this design slightly to allow a small slope in the roof to fix some perspex so you can escape showers? Does it make it more complicated to build?
Came across this video and realised it's a while since I watched you and back then you didn't show your face (never easy to put a face to a voice). Delighted to see the progress you've made in video production subscribed!
Great job, it looks so simple in your hands. That's very inspiring for my own construction, on mine I'd like to have 5% slope so the cutting of notches will be a little bit more difficult.
Great video very easy to follow never thought about doing something like this but feel I could after watching this 😊, I'd add some form of roof though to keep dry or in the shade on those hot days
where were the timber purchased from? I looked into wickes, selco, travis perkins and jewson but the finish quality is not same as here. I'm planning to build one with exact same dimensions. Thanks.
Hi am going to attempt to build one myself so can you tell me are the notches you put in 4x2 and 6x2 2in deep.Also I am going to put a plastic sheets on my one and it will need to tilt a little so rain can run of can you give me some pointers thanks.Geoff
You don't want the post-crete to finish lower than any finished patio or block paving. Or rainwater will drain to this point. The post will rot where it protrudes from the cement. Best way is to cement in a post support into the post crete so the base of the post is suspended from the ground level. This will allow it to dry out in rainy conditions and slow down the rotting. It will also allow an easy way to replace in future. All cut ends of treated timber will need a good coat of wood preservative.
I want to build a pergola and found this very useful. I don't want to dig into a recently laid resin floor though, is there another way to secure the front posts?
Good job. Only the timber you attached to the wall maybe level, but you should have eyed it with the top of the window to make it look uniform. Great job though 👏
Great video! What I like the most, is that you cut the wood outside and on your table. I watch other DIY videos by people with a huge warehouse in their garden and every tool available to them. Your video makes me think I can have a go at this myself. Thanks
A very user friendly video isn't it!
Haha exactly... "First you're going to want to find a nice tree in your personal forest and start by cutting it down and running your wood through a plainer.."
What equipment is needed for this job , I want to try as well.
@@DH0071 drill machine, stone drill, plugs, deadbolts fitting with the plugs, a jigsaw and a normal saw or circular saw to top the standing pole. Oh, and something to dig a hole, mix your quick concrete and a hammer and some other small hardware to keep the pole upright whilst the concrete is setting. Pretty minimal, with some basic tools. The jigsaw isn't necessary perse, it is nice for the ornamental cuts, but using some straight angled cuts should work out great too (circular saw, or normal saw)
Exactly, great comment 😊
Great video. Just wished you'd given measurements of the notches made and also the distance between then.
Great video! This is exactly what budget DIY videos should be, basic tools, a good understanding and one video not 42 parts.
Wouldn’t quite say a cordless dewalt jigsaw is s basic tool. They start at £200
@@stevepeacock4265 just because this jigsaw is £200 doesn’t mean it’s not a basic tool, you can get them for £20 dude.
Always enjoy watching your videos. Straightforward and simple, no overdone commentary or loud music. Will use this when building mine this Summer. Stay safe and healthy, Joe!
Subbed because you didn't use too many fancy items and did it like a proper DIY. Thank you so much. Xx
Many thanks Joe. You are a really good presenter and explain things simply and clear. Just the right balance of letting us see what you are doing but also explaining what you are doing and why. Great stuff and all the best.
Just finished this with bamboo rolled on top attached with fence staples. Looks awesome, great video. Used fencing rails for the rafters and would recommend useing planed timber for the post uprights if you can afford it. Used clear silicone round the gaps in the joints etc. This from an amateur diy er 😃
Im a lady who was looking for something like this, so nicely illustrated thank you
Thank you, Joe. I have been debating building my own due to the increasing delays in buying one. You have convinced me, and made it look so easy. Excellent explanatory video.
Thanks Chris! Really glad the video is of help :) Joe
How did it go did you manage to get it done?
Great video. You explained things really well. You’ve shown me that this lady can give this one a go.
Thank you
Thanks! Really glad you found it helpful. Definitely give it a go! :) Joe
Shoud've made the ledger board level with the brickwork for aesthetic reasons...it's only a few millimetres.
Would have looked better to the eye and easy to do......Maybe I'm wrong?
Great vid. Only point to add is to treat cut ends with wood preservative to prevent rot. Thank you for the vid 👍🏽
I’ve just took one back to it’s. Original form it’s beautiful, watching you made me cry
This is an amazing video and exactly what I was looking for. I so appreciate the step-by-step instruction with different angles. This is how to make a diy video. Much appreciated!
Great video, very clear instructions. Don't forget to add a can of sealant to your budget and procedures. Every cut should be sealed, and depending on the size of the hole and treatment method, every hole needs to be sealed as well. Especially if that wood has a warranty.
V good video. I built one of these years ago and grew climbing plants on it. Only thing was if you sat under it in rain it was wet so we added some clear top panels to provide some cover. That worked well but you had to maintain them regularly. I'm in another house now and planning building one and fixing a pull out awning on one side. That will neatly hide away when it's dry but allow it to be covered if it's raining but warm. We are going to put a table and chairs under it.
Absolutely brilliant matey, simple and nice.
I used fence post brackets to secure mine to the ground. You can buy some really fancy ones that hold very firm and it makes it easier to remove and saw if needed.
Thats a great idea Glenn! Much quicker and easier to fit and easier to remove later if need be too :) Joe
Did you just screw into patio slab?
Brilliant video watch a few times and it may have took me a few days am happy my pergola turned out so well.i even put lights on it thanks 😊
I’m made up I found your Chanel the mrs has been nagging me to build 1 of these and now I know exactly what to do thanks 👍🏻
Where the wood has been cut for notches, it’s good to brush on some preservative. Nice and simple instructions, great 👍
Would definitely help! We ended up painting the structure with wood preserver afterwards but adding some to the joints before hand would have been the best bet for sure 😊 Joe
That's a great video, just what i was looking for. Thank you!
Brilliant video but can you add a shade cover on the roof ? And what would you recommend?
Good to hear a local voice on YT! Its a good design that is easy on the eye. I am going to do one myself but i will be adding glazing bars on it so it can be used all year round!
Hi, First of all thanks for uploading your video.
You make it look so easy, you deep are your notches for the beams, as you've gave me inspiration to try and build one.
Once again thanks for the video.
Cheers
Gerry
This video was great, I love how you demonstrated everything clearly without complicating for the novice diy person. I used your help and just finished building my own in 2 days!
One question, I’d like to secure the cross beams as they’re not all tight, what would you suggest for this and how please?
Once again thanks for all the help with this video.
If there’s gaps I’d use wood filler then you can get 4 inch hex head screws (coated for outdoor use) to hold it
Very good I might need to come and fence my garden
God bless 🙌 🙏 you
Absolutely brilliant job! Nice and simple, plus easy to follow instructions 😊
I plan on making this in the next few months with my 11 year old son. A fantastic mother and son project 👍🏻👏🏻🙏🏻
Awesome. Watched this and built my own. 3m x 4.8m cost of timber was 230 and another 35 ish on extras, 270 tops, in shops was looking around 600 for the size. Well worth it, only tools used was my drill, screwdriver, saw. Took me say 7 hours on a Saturday and another 3 on the Sunday to do some finishing up and adding trellis for some climbers. Wife's pleased so all good 👍
Building one with the exact measurements, did you use 6 rafters for the top or add additional ? Did you put a tilt on it ?
@@katebohan17 wish I could add a pic and show, it's 4.8 wide, 3m deep, 2.4 high. I have 7 uprights, because its on top of my decking I wanted to make it 100% sturdy and solid. so 3 uprights bolted to rear of house, 4 at lawn end, one either corner 2 in middle to create a archway to lawn, left side has our boundary fence, right has wall from extension half way, rest a 90cm fence, lawn edge also has a 90cm picket fence with a gate in the arch section for access to garden, on top I have 6 3m lengths evenly spaced, I have 10 39mm x 18mm 2.4m battoning to make 5 4.8m horizontal lengths and 4 of the same over the top for climbers. Added a star jasmine and bridesmaid clematis. Oh, and it's not on a tilt because it has no fixed roof so no need to worry about water collecting, but my last job for it is to figure a way to add a retractable canopy for shade when too hot as it gets the full fun.
Hope helped 😀
@@RKaye87 sounds awesome..you can buy the retractable blinds..put some thin metal rope wire around the edges with hooks in the corners attaching it. You can buy the retractable roof curtains with the accessories too.
I think it’s great. One of the best videos I’ve seen by a mile. Thanks for showing it.
You've inspired me to step way out the comfort zone and replicate this DIY solo. Thanks for all the different camera angles and step by step made simple.
Very impressed at how easy Joe made it look. I only wish I was as adept with my hands as he is. Excellent video.
Nice job. I'd have raised the batton to match the window just for aesthetics.
Good vid. Straightforward and unpretentious. Thank you.
Great video. I am getting ready to build one myself.
For 8x8 patio area, I am going to use 6x6x8 for my posts.
Then 2×12 ×10 for my beams, but I and double beaming my posts.
The 2x6x10 rafters and
For the lids 2x2x10 also I am using metal brackets for all corners and fasteners. I feel it will be better against the elements with this type of support.
Great video. I'm starting on my first 8ft by 8ft pergola today. I bought $300 US worth of lunber in sale for $95 US.
Nice construction and video. I would sand down does cuts, some look a bit rough, but nothing that can't be easily fixed.
That was brilliant. I’ve only just decided today that I would like a pergola. I’m tempted to give it a go. Thanks. 👍
Definitely give it a go! It's so rewarding making one :) Joe
Love this video! Probably the most helpful DIY video I have seen, will be giving this a go!
Amazing job WELLDONE! and the best thing I have heard from this video is "even if you do buy one you still have to build it" very well said mate
Been looking at videos to see how it's done and get ideas
Your video made it look so easy
Wish you had put a roof on it tho as that's what my ideal pergola will be
Absolutely great video no messing about straight to the point with info on build and prices, spot on your a star.
Thank you! 😊 Joe
Boa noite!
Acho que você é um artista!
Parabéns pelo seu talento!
Abraços!
BRASIL! !!👏👏👏👏👏👍👍👍👏👏👏👏💃
Excellent very well explained
Great job, nice and easy and well demonstrated. I don't understand why people put these up without covering them. This side of the world it rains all summer. I suppose for creepers and hanging baskets maybe?
Thank you so much for this video. I told my partner that I wanted to build a pergola on my own and described exactly how I was going to do it (basically step by step same as you) and my partner told me that I was being ridiculous and it wouldn’t work the way that I said. I used to video as proof that I was right and i can in fact do it on my own and the way that I said 😅
Great Vid, do you have the timber dimensions pls, I know you mentioned it in the vid just makes it easier when planning
Nice one for putting the video up I’m going to be building myself on to go over my pond. But not going to put the post in the ground I was going to use post brackets what’s your opinion on these?
What a cracking video. Thanks chap!
Less than 1:30 in and I've seen the best depth gauge trick ever haha. I never once thought to use tape. Obviously a trick of the trade, but I'm a simpleton and that was an eye opener. Great vid as well, am here as about to build my own!
Great video what size is the screws please?Also in the future can you list the. In the description box ?
Quick tip... treat your notches to help longarivity and resistance against damp
Thank you. Now I think I can do this. Just have to learn how to use the drill.
It probably makes sense to treat the exposed cuts with something. Depending on how your wood was treated, the core might still be untouched. Nice video BTW!
Thank you very much for the video, very clear and I'm going to give this a go myself. What model Dewalt jigsaw did you use, can you recommend one? Many thanks.
Your right about the prices on these… was going to do one myself but thought I’d a pop up gazebo…basically to cover a blow up hot tub…
The kits are really pricey. Timber prices at the moment aren’t helping either. Hopefully that will change soon 🤞 pop up gazebos are great though. I use one to get out of the rain when making stuff haha 😊 Joe
Great video. Have to make one and have a quick question if don’t mind. Is it okay to put a post directly into concrete or is is better to set a steel foot into the concrete and place the post in that?
Great video mate. I'm going to build one myself and it's helped me get a better idea of how to go about it. Cheers mate
Brilliant and very basic thanks for the share
Great video - best on the subject I've seen :) Can you tell me though - what if you wanted to tweak this design slightly to allow a small slope in the roof to fix some perspex so you can escape showers? Does it make it more complicated to build?
Just mind that there will be a slight angle on cuts for the parallel boards and you should be good.
You'd also have to factor in guttering and a downpipe and drain away to get rid of the rainwater.
I have some left over wood I'm going to give this a try..thanks for the ideas mate !
Came across this video and realised it's a while since I watched you and back then you didn't show your face (never easy to put a face to a voice). Delighted to see the progress you've made in video production subscribed!
that's exactly what I'm planning to do this weekend.
Nice job we are planning making one video really helped
Great job, it looks so simple in your hands.
That's very inspiring for my own construction, on mine I'd like to have 5% slope so the cutting of notches will be a little bit more difficult.
Great video very easy to follow never thought about doing something like this but feel I could after watching this 😊, I'd add some form of roof though to keep dry or in the shade on those hot days
can you provide a link to the cordless electrical saw you were using?
Thank you!! Best video so far, I feel confident doing it now
what a great n helpful video! is there any other way to put the post on the floor without digging a hole n put cement mix ?
Revisiting this one cos I need to pull my finger out and get a pergola put up in _my_ back-garden :) Nice one, Joe!
Superb video mate! Given me the confidence to get on with mine now!
appreciate the video, really clear and helpful
This is brilliant, exactly what I was looking for!
Do you have a video for decking or patio?
Are the wall plugs box standard or do they come with the coach bolts?
You have a beautiful garden! Well done, it's lovely 👌👍
I'm going to have a go at this one myself looks straightforward thanks to your video 👍
Perfect video, clear guidance...I'm set to build mine 4m wide x 4m long x 2.4m high. Thanks for the inspiration...
Thank you for that, great video great delivery
You make it look so easy! Your garden is beautiful.
Excellent video and great idea for a channel. Liked and subscribed 👍🙋♂️
Great video, what a lovely garden too
I'm here 1 year on, timber prices did not come down lol, they are double, but still cheaper to DIY of course!
Great video. Do you need planning permission?
Clear vid, temping to build one now!
where were the timber purchased from? I looked into wickes, selco, travis perkins and jewson but the finish quality is not same as here. I'm planning to build one with exact same dimensions. Thanks.
Excellent video, bud. The only thing that confuses me is what do you do with a pergola once it’s up?
Great video. I have no idea what a pergola is for, but I want to build one!
Haha Thanks Don! :) Joe
100% going to follow your guide, great build. Just about to do some decking so can incorporate this build alongside it.
just made a start on mine going well.
Hi am going to attempt to build one myself so can you tell me are the notches you put in 4x2 and 6x2 2in deep.Also I am going to put a plastic sheets on my one and it will need to tilt a little so rain can run of can you give me some pointers thanks.Geoff
You have made it look fairly easy, I want to make a free standing pergolas for our garden, and i wondered if they 'HAVE' to be concreted in?
You can buy brackets for them. Some people even use brackets for installing fences too.
good job. well explained. thank you.
So helpful! Thank you. Do you need to use spacers behind the wall plate to stop moisture getting trapped?
I’d just put a bead of silicone to make it water tight maybe
I'm starting one next week. A really helpful video. Thanks. I expect that I will be referring back to it a few times once I get started.
You don't want the post-crete to finish lower than any finished patio or block paving. Or rainwater will drain to this point. The post will rot where it protrudes from the cement. Best way is to cement in a post support into the post crete so the base of the post is suspended from the ground level. This will allow it to dry out in rainy conditions and slow down the rotting. It will also allow an easy way to replace in future. All cut ends of treated timber will need a good coat of wood preservative.
looks great, cheap too. what did u do for the bottom of the post where u removed the slab? cut the slab and put it back maybe?
Nice Video everything in this video I can do it, but that nice cut its hard for me even though I have got that Dewalt machine
I want to build a pergola and found this very useful. I don't want to dig into a recently laid resin floor though, is there another way to secure the front posts?
You can buy brackets especially for pergolas some even use brackets for building fences too.
Great video and we’ll done! Lots of common sense and well made….planning to make my own soon to support a new whisteria.
Good job. Only the timber you attached to the wall maybe level, but you should have eyed it with the top of the window to make it look uniform. Great job though 👏