I have a Daf like this and chanced batteries myself. Brand new batteries, 10 percent acxording to the dash. After 3 or 4 days i read 100 percent.No problems, done great for 1,5 years.
thanks for the comment, interesting buddy, did you not have warnings to start the truck? according to daf that should be reset upon replacment. ive never not done it but now i know.thanks
Hi Russel, good to see you again. As always an interesting video you are very busy. Back when I was a mechanic it was very easy battery change and alternator checks and drive again. Trucks are getting way too complicated. on the other hand that makes it much more challenging. until the next video. Greetings from the Netherlands.
hi again buddy, yes trucks are getting to complicated but i feel the manufactures are only responding to the guidelines set out by the governments. like we have a clutch on the alternator now also for NGD.
You finally uploaded a new video, my friend. I've been waiting for it for a long time. Always showing complex problems. Thank you, teacher. I've made my decision and I'm going to start my own workshop, because you are a great inspiration. Greetings.
Well new video to UA-cam. This is from August. The website gets videos I can't or won't put on here. I'm glad you find me inspiring buddy 😎😎😎 good luck on your new venture 💪😎
nice to see you back mate missed the videos .don't know why anyone would want to be a bus / coach mechanic shit to work on I've done a little bit but never a again .
Ha ha ha I've been busy with the new van and stuff. To be honest I find the buses interesting......yes it's getting to that point in my life where I need to mix things up and I have a list as long as my arm for coaches to be fixed! Hope your good buddy 😎
The red with the blue tip you tucked out the way is part of the engine fire suppression system. They usually have parts sticking out every so often along the length so its further over the engine and in theory, will detect and suppress a fire earlier
Thanks, will do! Doing a bit more over on the other socials now as it's quicker and more in the moment. The last thing I want is another injector replacement video next week 😂😂😂
Hi buddy, yes we have had the same issues as you with mx-13. We have had recalls for camshafts and I still see about 2 trucks a month with failed camshafts that are outside the chassis range RECALL specified by DAF. I love the product buddy, but the older stuff certainly has had less issues in my eyes 👀
I had an injector once which had been reconditioned and was missing 1 digit in the code so I left the old code in and fitted it. The engine knocked and smoked, that was the first and last time I tried to change injectors without using the trim code. If it wasn't necessary....why would you need to calibrate them
One of the injectors breaks down under heat and leaves fault codes for injectors 1, 2 and 3 open or short-circuit if I remember correctly. You can test them but they will come back fine 😬 if I had a Delphi fuel injection test rig I could warm up to engine temperature I'd be able to find the faulty injector 😂😂😂😂
This better be good ,long time no see lol Edit ,,,A fng bus !!!!!!!!! Your are a glutten for punishment Well done i would and have run a mile lol...I personally think the BEM is a waste of time ..Drivers will ignore any warnings they get whilst the TV playstation Microwave is on ,,They just call DAFaid ..Batteries are needlessly replaced in my opinion ,,I have stop start it doesnt work ,well occassionally it will ,god knows why ,but the cars starts every day no issues ,even if left for a week ,Yes i can pay over a £100 for a new battery ,but the stop start will work for 6 months max ,,I know this as i got the car new lol...and if it did work i would switch it off lol
Good video, that sensor you found under hatch is a fire sensor guessing it has fire suppression, also great access on a vanhool can go in the sides 👌🏼 that barcode reader 🤌🏼🤌🏼🤌🏼
You will make fortune on coaches as not many people like working on them but then again no one wants to work atall,would imagine you in high demand as most good mechanics are. Up in scotland even 💩 mechanics are wanted as no one can get them, think in next few years you will need to be a computer wizz to fix anything. Work has new MANs and all can say is they 💩 but that only my opinion keep up the good work 👍
That bus engine bay is rather well thought out, almost like they didn't want anyone to poke around there.. That barcode reader looking thing for the injector codes is amazing.
This vanhool isn't too bad to get into buddy, I did a irizar the other week and that was just nasty lol Yes DAF do one for the DAVIE where you scan the data matrix on the injector. That's why I get new injectors from delphi.....recon injectors just have a printed trim code on the side which takes ages to type in 😑😑😑😑
You just did 😂😂😂😂 I've youtube filters on for spam, links, websites, bots and the word davie lol I've just found your comment in the spam section so I've approved it 👍
I have a Daf like this and chanced batteries myself. Brand new batteries, 10 percent acxording to the dash. After 3 or 4 days i read 100 percent.No problems, done great for 1,5 years.
thanks for the comment, interesting buddy, did you not have warnings to start the truck? according to daf that should be reset upon replacment. ive never not done it but now i know.thanks
@@TRUCKTECHUK Not a single problem. Lucky me i suppose.
Hi Russel,
good to see you again.
As always an interesting video you are very busy.
Back when I was a mechanic it was very easy battery change and alternator checks and drive again.
Trucks are getting way too complicated.
on the other hand that makes it much more challenging.
until the next video.
Greetings from the Netherlands.
hi again buddy,
yes trucks are getting to complicated but i feel the manufactures are only responding to the guidelines set out by the governments. like we have a clutch on the alternator now also for NGD.
You finally uploaded a new video, my friend. I've been waiting for it for a long time. Always showing complex problems. Thank you, teacher. I've made my decision and I'm going to start my own workshop, because you are a great inspiration. Greetings.
Well new video to UA-cam. This is from August.
The website gets videos I can't or won't put on here.
I'm glad you find me inspiring buddy 😎😎😎 good luck on your new venture 💪😎
@@TRUCKTECHUK thanks very much buddy.
nice to see you back mate missed the videos .don't know why anyone would want to be a bus / coach mechanic shit to work on I've done a little bit but never a again .
Ha ha ha I've been busy with the new van and stuff.
To be honest I find the buses interesting......yes it's getting to that point in my life where I need to mix things up and I have a list as long as my arm for coaches to be fixed!
Hope your good buddy 😎
Hey buddy long time no see you, i am glad that you posted , keep going like that.
Thank you!
hi buddy, yer thought i best pop a video on ha ha ha.
The red with the blue tip you tucked out the way is part of the engine fire suppression system. They usually have parts sticking out every so often along the length so its further over the engine and in theory, will detect and suppress a fire earlier
Ha ha ha ohhhh F**K 😂😂😂😂😂. Let's hope it doesn't catch fire any time soon 🫣🫣🫣🫣🫣
@@TRUCKTECHUK it'll be absolutely fine
@@iortac9490 it will go on fire now 😂😂😂🫣
Great video once again keep them coming
Thanks, will do! Doing a bit more over on the other socials now as it's quicker and more in the moment. The last thing I want is another injector replacement video next week 😂😂😂
You make the job look easy Russel, DAF dealers ( HTC) always make it look hard for some reason ? maybe to get the hours in to stich you up ?😉😉
Top Video Russ 👍👍👍
Cheers buddy, glad you liked it and thanks for the comment buddy 👍
Good job, thanks 👍
Thanks for watching buddy and thanks for the comment 👍😎
do you have a vedio of power window problem of daf cf?
Thanks for another good video
No problem buddy. I'm glad you enjoyed it 😎👍
nice 1 mate a hope you had ya watch on counting the steps 😃😃
Ha ha ha I think I checked my phone and it turned out I didn't do that many in the end 😂😂😂😂😂
Thank you.
@@mauritztoivonen1070 no problem my friend 😎
عملك جدا رائع
Thank you buddy 👍😎
hey pal , where did you get the injector bore cleaning brushs
Thanks for the comment buddy. You can find them here www.trucktechuk.com/product-page/mx-11-and-mx-13-injector-sleeve-cleaning-kit
At what cylinder acceleration value does the injector need to be replaced?
good question, I dont think ive ever come across any information on RMI referring to it for replacement only fuel leak off quantity and UBD values.
Im a truck mechanic from the US, are paccars over there suffering camshaft failure like here? Do you like the paccar engine?
Hi buddy, yes we have had the same issues as you with mx-13. We have had recalls for camshafts and I still see about 2 trucks a month with failed camshafts that are outside the chassis range RECALL specified by DAF.
I love the product buddy, but the older stuff certainly has had less issues in my eyes 👀
Is injectors code input is necessary?
I had an injector once which had been reconditioned and was missing 1 digit in the code so I left the old code in and fitted it.
The engine knocked and smoked, that was the first and last time I tried to change injectors without using the trim code.
If it wasn't necessary....why would you need to calibrate them
Thanks man im really enjoying watching your videos
I work on DAF trucks in Africa... all problems we have we change PCI and also injectors problems
How is this progress 🤦 , great video.
Ha ha ha 😂 it's amazing technology......🥲🥲🥲🥲🥲
is the injector not working or there have problem in nozzel internal
One of the injectors breaks down under heat and leaves fault codes for injectors 1, 2 and 3 open or short-circuit if I remember correctly.
You can test them but they will come back fine 😬 if I had a Delphi fuel injection test rig I could warm up to engine temperature I'd be able to find the faulty injector 😂😂😂😂
@@TRUCKTECHUK thank you for your sharing answer big help for me
@@jorelpaloma4186 no problem buddy 😎
the qr code mate , is it any specific type ?
It's is mate, I'm on my 3rd one and it's still not right. It's close but I'm trying to sort one that you can customise the length of the code.
@@TRUCKTECHUK when you get the correct one. you might let us know pal
@raymccarthy7492 no problem buddy. I'm working on it 👍😎
that lead was a engine bay overheating sensor think it sets of a fire extiguiser needs to be over the engine fully floating
yep, gonna have to get that untucked :(
🎉🎉ciao come stai tt ok da quando tempo
I'm good thanks. Thought I best drop a video on youtube....been busy with the new van
Hello, where can I see the full Diag Jaltest tutorial, we are Iran and it is banned here
There is no jaltest tutorial
This better be good ,long time no see lol Edit ,,,A fng bus !!!!!!!!! Your are a glutten for punishment Well done i would and have run a mile lol...I personally think the BEM is a waste of time ..Drivers will ignore any warnings they get whilst the TV playstation Microwave is on ,,They just call DAFaid ..Batteries are needlessly replaced in my opinion ,,I have stop start it doesnt work ,well occassionally it will ,god knows why ,but the cars starts every day no issues ,even if left for a week ,Yes i can pay over a £100 for a new battery ,but the stop start will work for 6 months max ,,I know this as i got the car new lol...and if it did work i would switch it off lol
Ha ha ha 😂 you need to get on the social medias buddy 😂. We're branching out 😂
@@TRUCKTECHUK Fuk no i specialise in being anti social lol
Good video, that sensor you found under hatch is a fire sensor guessing it has fire suppression, also great access on a vanhool can go in the sides 👌🏼 that barcode reader 🤌🏼🤌🏼🤌🏼
You will make fortune on coaches as not many people like working on them but then again no one wants to work atall,would imagine you in high demand as most good mechanics are. Up in scotland even 💩 mechanics are wanted as no one can get them, think in next few years you will need to be a computer wizz to fix anything. Work has new MANs and all can say is they 💩 but that only my opinion keep up the good work 👍
I wonder what you put in this that UA-cam didn't like 🤔. I just saw it in the held for review section 😵💫
That bus engine bay is rather well thought out, almost like they didn't want anyone to poke around there..
That barcode reader looking thing for the injector codes is amazing.
This vanhool isn't too bad to get into buddy, I did a irizar the other week and that was just nasty lol
Yes DAF do one for the DAVIE where you scan the data matrix on the injector. That's why I get new injectors from delphi.....recon injectors just have a printed trim code on the side which takes ages to type in 😑😑😑😑
Wont let me comment 😭
You just did 😂😂😂😂 I've youtube filters on for spam, links, websites, bots and the word davie lol
I've just found your comment in the spam section so I've approved it 👍