Part - 2 | potential free contact How to do Digital Output wiring in PLC/DCS | wiring |

[@tushartiwary3883]

Very Clearly Explained Sirji...
Thank You... 😊 🙏

[@ElectricalAndautomation_guru]

Thanks, please share with other

[@nm_arts5868]

Thank you for clearing my doubt if potential free contact .

[@ElectricalAndautomation_guru]

You're welcome 😊

[@Rohit-zc2ew]

Bahut achha se smjhate hai sir

[@ElectricalAndautomation_guru]

Thanks, if you like the video the video , do not forget to like the video and subcribe channel. if you ahave alredy done, please ignore this!

[@TanveerAhmad-km4gk]

Perfect material... Love you sir

[@ElectricalAndautomation_guru]

Thanks, brother. Please share with others.

[@gajendrachauhan7579]

Good information.Keep growing ,Sir

[@ElectricalAndautomation_guru]

Thanks, please share with others

[@eakubhosen2339]

Very nice explanation

[@ElectricalAndautomation_guru]

Welcome, thanks for the appreciation please share the video with others and do not forget to subscribe to the channel

[@souvikdey6257]

Very good explain sir pls make video for AI , AO shrink and source on this board and explain it . And pls make video how to configure a channel with tag in DCS and how it give to controller as its input in DCS pls sir make this video series pls 🙏🙏🙏👍 thanks .❤️

[@ElectricalAndautomation_guru]

Ok, sure

[@dilipkumar-dj1cd]

Tq sir 4 ur helpful video

[@ElectricalAndautomation_guru]

So nice of you

[@sintudas1828]

Love you sir❤️❤️❤️

[@ElectricalAndautomation_guru]

Thanks brother, please share with others.

[@khurramcheema1505]

I couldn't find the videos you made before about motor run with the help of PLC DCS Cards DI, DO, AI, AO with wires connections, same you made 1 video with VFD.

[@ElectricalAndautomation_guru]

Ok

[@sumonnath1084]

Excellent sir

[@ElectricalAndautomation_guru]

Thanks brother

[@cck1496]

Good video....Is a single relay shared by two fuses? Can you please explain?
Thanks.

[@ElectricalAndautomation_guru]

Yes, correct

[@cck1496]

@@ElectricalAndautomation_guru Would you kindly explain please? Thanks.

[@BabalukumarSingh-vx4ml]

Ok sar

[@khurramcheema1505]

Nice video

[@ElectricalAndautomation_guru]

Thanks

[@MOHAMMEDABDULLAH-jd1dh]

Very niece explain..
My question is..how can I bypass relay and join DO singal directly to field?
I undrstood from DI video how to connect without relay to directly to plc

[@ElectricalAndautomation_guru]

Thanks.

[@MOHAMMEDABDULLAH-jd1dh]

You didn't replied to my question

[@rizwanshahzad2150]

nice

[@mr.solanki3744]

Thanks so much🙏

[@ElectricalAndautomation_guru]

Welcome!

[@PurushothamanR-br3dp]

Pls Explain in English it will be usefull for every one

[@ElectricalAndautomation_guru]

Ok

[@durgadas957]

Sir will you please explain the supply system from relay contact point to the equipment. Please elabrate how it's working. 🙏

[@ElectricalAndautomation_guru]

Ok

[@rockyiqbal7449]

Nice video but thora aap slow bolen thanks

[@ElectricalAndautomation_guru]

Ok brother I will try to make my language slower so that you can understand and other can understand better and I request you to share the videos with other so that they can take the benefit of this

[@ghostfulcrum7511]

❤👌

[@amitabhakdh]

aur ek request he
ji aap potential free AI and AO video baniye through analog barrier
Thank you 🙏

[@ElectricalAndautomation_guru]

Ok, already made a video

[@skaktarhossain3434]

Bhai ek tripod lelo Or camera ko fix karlo...video achha banega.

[@ElectricalAndautomation_guru]

Ok

[@akankshasingh1014]

What do we use relay??

[@Goku_sama322]

U mean why??
Relay provides additional isolation between controller & field connection.
Here the signal is digital, hence relay,
Otherwise in case of Analog, we use Fuses.

[@ElectricalAndautomation_guru]

Switching

[@rajivrai4235]

Sir aap video jada dayri tak banai jis ko Sikh ho ga oo daykha ga

[@ElectricalAndautomation_guru]

Ok

[@ambikeshgiri2284]

Sir belt scale ke bare mein video banaye

[@ElectricalAndautomation_guru]

i will try.

[@rajdeepbhowmick1228]

Sir, DO card se jo relay ke coil me supply jaati hai start/stop ki wo 24V DC hi hoti hai na? Toh potential free kaise ye please doubt clear kar dijiye. Thanks for making this channel I am a regular student.

[@ElectricalAndautomation_guru]

Yes 24 V

[@khurramcheema1505]

With DOL STARTER and star delta with PLC DCS

[@ElectricalAndautomation_guru]

Ok

[@ajeetsingh-qc4qk]

Sir, DO relay kitne time k liye ON rahta hai ?

[@ElectricalAndautomation_guru]

10sec, but you can chnge the timing in DCS

[@googleaccount518]

Is potential free is dry contact?

[@ElectricalAndautomation_guru]

Pt

[@mehulpatel9579]

👍🏻🇮🇳

[@ElectricalAndautomation_guru]

welcome

[@modipatel7678]

Sir where is the neutral contact in the tb

[@ElectricalAndautomation_guru]

Ok

[@jaysondkar5368]

Sir es do card may connection A B C konse terminal may connection karte hai?

[@ElectricalAndautomation_guru]

Brother , in do card there is no A,B & C terminal they are a1, a2 , a3 etc like that , so we connect the wire from this

[@jaysondkar5368]

@@ElectricalAndautomation_guru thank you sir

[@ElectricalAndautomation_guru]

Welcomr

[@bibhutinaik7787]

sir make AI/AO videos

[@ElectricalAndautomation_guru]

Ok, they are coming in the series.

[@tumharabaap4477]

Sir aapka koi offline training center hai???

[@ElectricalAndautomation_guru]

Nahi, Bhai. Just online.

[@jaysondkar5368]

Sir potential free wiring ka matlab ki esko dry contact connection bolte hai na

[@ElectricalAndautomation_guru]

Yes.

[@v.p255]

टरबाईन का MPUकैसे चेक करते है सर बताओ.

[@ElectricalAndautomation_guru]

Just check its resistance from the input lead.

[@electricalengineering609]

Kuchh dinon ke liye guidance chahie

[@ElectricalAndautomation_guru]

Please mail me
[e-mail]

[@v.p255]

सर D/I और D/O जो vfd मे लगे हुये है ओ सिंगनल आते है या नही यह मलटिमिटर मे कैसे चेक कर सकते है.

[@ElectricalAndautomation_guru]

Continuity ki help se

[@v.p255]

Thanks sir

[@ElectricalAndautomation_guru]

Welcome

[@v.p255]

पहिले Do Di के सिंगनल कैसे चेक करते है मलटिमिटर मे ओ बताओ

[@ElectricalAndautomation_guru]

Ok, I will tell

[@RaviPatel-up3ob]

Sir apna cn .bhejo

[@ElectricalAndautomation_guru]

You can. mail us.

[@v.p255]

सर विडिओ .

[@ElectricalAndautomation_guru]

Which topic?

[@electricalengineering609]

And you come out meant in your address and contact number

[@ElectricalAndautomation_guru]

ok, thanks, please don not forget to subscribe our channel and don to forget to share with your friends in social media platforms.