I really appreciate your mouth rig workflow! A lot of material I used when I learned mouth rigs showed each keyframe being done at the same time, and doing the extreme ends first saves you a lot of fuss! It took me a while to realise I could just ADD the in-betweens after. So I really appreciate this as an example of a good habit for beginners to pick up!!
omg this is the most concise video I've watched in a bunch of Vbridger instruction!!!! You even summarized it with screenshots and showing it directly, thank you very much for your work! soooo underrated
You are an absolute saint for this set of tutorials. I just. I have probably put about 30 hours into my rigging at this point, all with your tutorials by my side. XD Once I have my debut of my model, you can bet I'm going to link to this series on my about page.
I was stuck on this part for weeks because my mouth was modeled in many separated layers and i have a beard to work with also. Thankful for this resource still as I cross referenced it constantly during the entire process. After this segment I feel significantly closer to the final result.
If you're running into the issue that your mouth closes when turning the head of the model Check to see if its connected to angle x/y by using the 9x9 grid button on your parameters if it is press the delete all keyforms button for each of your mouth layers and it should be fixed
Hi! just seeing this now. When I do this, It deletes the mouth entirely or it will then only stay facing forward. What am I doing wrong? Should I find a solution in case you don't/can not reply, I will edit my comment! 💜 Edit: fixed it within a 20-30 minutes. I was selecting "Mouth XY" and not the individual parts of the mouth. You need to go into "Mouth XY" and select everything you need to, EXCEPT "MOUTH XY" DEFORMER! (the green windows logo lookin fella) that's the important part. then it works perfectly fine and I can edit the mouths to my heart's content. Happy rigging y'all :)
I wish there had been a mouth glue tutorial ;; I tried to do it with the brow one but it doesn’t work at all, mouth is so different from brows, I have no clue what I am doing wrong…. maybe there can be a small mouth glue tutorial in the future, that would be awesome!
Hope you got an answer by now, but I struggled with this for several hours. I did find in another tutorial that when gluing, use the either the glue icon in the Tool Details with just the red or green instead of the one with both to adjust the weight. That worked perfectly for me.
2:12 see how the skin doesn't move correctly and stays above the bottom lip. mine is doing that but also after i move everything into place and i can't seem to figure out why its doing that ;-;
I made the mouth on my vtuber really hard to rig so if i don’t use some of the vbridger things will it still work? Im still going to use mouth x, check puff, shrug, & jaw open. Just wanted to know 9:39
Hi! In the Vbridger part my model's mouth doesn't change shape when I choose another parameter in mouth form and mouth open, for example I did MouthFunnel, and it works well in 0x0, but in 0x1 it doesn't change the shape, it doesn't get smaller like I did, is that normal? or I have to edit each parameter to change shape?
hi! so i followed the exact steps for the vbridger parameters and stuff but when i tested my rigged model on vtuber studio it does use the vbridger mouth parameters, the other mouth forms are working fine, how do i fix this?
This is such a great tutorial! It's been so helpful, but I'm running into a problem when making the mouth funnel, the rest of the mouth forms don't change to be funnel shaped(?) they just stay the same Idk what I did wrong 😭
same TnT ... i dont understand why it doesnt work when i did like it was told... i know its been 3 months... but you can try to do it for each keypoint manually... :/ idk any better idea
I have a problem with mouth press lip open, when i do - 1, my 0 and +1 also tweak. Same the other way around. Does anybody know what the problem is and how to fix it?
literately crying rn when i did that meshin nothing just moves and whole body suddenly moving i tried to move it on my own ways. but also didnt do my lip skins are separated i tried to glue but nothing good happens with it. i have no idea how u make ur mouth line move like that but aadhajksn
Do we need to have Vbridger? I don't have an iphone so putting in $10 on the plugin won't be of use. If we don't, do we skip the Vbridge section all together for all the new mouth parameters or we do them too and it could be of use in other programs? btw been following the tutorials and it's absolutely wonderful, thank you so much for sharing your knowledge
@@MerelyWufeii I finally reach the end of your wonderful tutorials and in the midst of that I watched your birthing vtuber vid and i just want to say, I love your passion and your willingness to share your passion with everyone who wants to try. Big brain move since your commisions are full you decided to spread the knowledge, theorically directly indirectly birthing more vtubers, idk you are a wonderful human being, your passion speaks loud and just, thank you for sharing! :>
I just can't ctrl shift c and ctrl shift v It keeps saying "please copy form before calling" Ok, for some reason i can do it manually via the menu Modeling -> Edit Form -> Copy Form, and then -> paste form
If you have AMD Adrenaline graphics you need to change the hot keys on adrenaline one of them is also ctrl shift c and ctrl shift v. Also make sure you are using the monthly and not trial version, trial version will not let you do it.
make sure you click the little drop down arrow and click select on form before you try the Ctrl+shift+C and Ctrl+shift+V stuff. That message is saying you down have a form copied because its not been selected.
I didn't understand the "only affects hair xy'S synthesize corners... Drag it back in for that and out again when done" I was hoping you would showcase it but you did not, can you explainwhat I need to do to keep the hair from deforming? If I leave it as is after taking them out of head z the bangs don't more proper when viewing the model posing
Hey again Merely! I got all the way to importing and I’m finally done. Thank you so much for the tutorial you’re an awesome teacher! The only issue left is that my mouth won’t move. I’m skipping the Vbridger steps so that’s not the problem. When I was editing and following along I accidentally deleted the “Mouth Form” & “Mouth Open” parameters. However, I thought I could simply make new parameters with the same name and did all my work on the new ones with the same Max & Min values. I think that’s why it’s not picking up… is there anyway to fix this? It’s the only issue I’m stuck at now- I’m sorry for the second comment, but I’m not sure how to find a solution anywhere else 😭 If you have the time and see this thank you! If not I’m still so grateful for your tutorial!
Hii great to hear that you completed your model!! 🤩 So when you replace params in live2d, make sure the ID is the same name, as that’s what vts uses to identify the parameter. But for now, you can simply go to vts and relink them to your new parameters. Just find vts params that the input says mouthOpen and mouthSmile ( part 11 at 5:51, the output should be red in your case, if you can’t find them, create new ones) and set the output to the new params you made!
@@MerelyWufeii Omg it worked! I was so scared of having to do it all again but it’s perfect! Thank you for everything. I hope everyone gives you your flowers, because you just started an entire new journey for me. 😭🫶🏻
help, when i tried to create the parameter MouthX i got ''FREE version - the limit of Blend Shape parameters is exceeded (3 objects). You have assigned 3Blend Shape to the object. i don't understand HELPPP
Your mouth deformers/layerd should not be rigged onto both mouth open and Angle XY parameters! Either one or the other. I had a separate mouth deformer only linked to Angle XY
When I try to make the first mouth, skin from my lower lip overlaps into it from the bottom, did i go wrong somewhere meshing the mouth or something? :(
I really appreciate your mouth rig workflow!
A lot of material I used when I learned mouth rigs showed each keyframe being done at the same time, and doing the extreme ends first saves you a lot of fuss! It took me a while to realise I could just ADD the in-betweens after.
So I really appreciate this as an example of a good habit for beginners to pick up!!
10:48 squish and squash come back🤭
omg this is the most concise video I've watched in a bunch of Vbridger instruction!!!! You even summarized it with screenshots and showing it directly, thank you very much for your work! soooo underrated
You are an absolute saint for this set of tutorials. I just. I have probably put about 30 hours into my rigging at this point, all with your tutorials by my side. XD Once I have my debut of my model, you can bet I'm going to link to this series on my about page.
Easy to understand and with a beautiful model, I love this 🥺❤
I was stuck on this part for weeks because my mouth was modeled in many separated layers and i have a beard to work with also. Thankful for this resource still as I cross referenced it constantly during the entire process. After this segment I feel significantly closer to the final result.
If you're running into the issue that your mouth closes when turning the head of the model
Check to see if its connected to angle x/y by using the 9x9 grid button on your parameters
if it is press the delete all keyforms button for each of your mouth layers and it should be fixed
Hi! just seeing this now. When I do this, It deletes the mouth entirely or it will then only stay facing forward. What am I doing wrong? Should I find a solution in case you don't/can not reply, I will edit my comment! 💜
Edit: fixed it within a 20-30 minutes. I was selecting "Mouth XY" and not the individual parts of the mouth. You need to go into "Mouth XY" and select everything you need to, EXCEPT "MOUTH XY" DEFORMER! (the green windows logo lookin fella) that's the important part. then it works perfectly fine and I can edit the mouths to my heart's content. Happy rigging y'all :)
YOU ARE MY HERO!!!! @@OddlyMonnie
Thank you, you're a saint 😭🙏
I wish there had been a mouth glue tutorial ;; I tried to do it with the brow one but it doesn’t work at all, mouth is so different from brows, I have no clue what I am doing wrong…. maybe there can be a small mouth glue tutorial in the future, that would be awesome!
Hope you got an answer by now, but I struggled with this for several hours. I did find in another tutorial that when gluing, use the either the glue icon in the Tool Details with just the red or green instead of the one with both to adjust the weight. That worked perfectly for me.
would love to see a tongue out tutorial too! i don't see enough of those.
2:12 see how the skin doesn't move correctly and stays above the bottom lip. mine is doing that but also after i move everything into place and i can't seem to figure out why its doing that ;-;
i was lowkey terrified of the mouth at 2:21 😭😭
I made the mouth on my vtuber really hard to rig so if i don’t use some of the vbridger things will it still work? Im still going to use mouth x, check puff, shrug, & jaw open. Just wanted to know 9:39
Yep vbridger is completely optional!
when i move my models head in xy the mouth movement disappears and stays closed and i have no idea what to do T w T
I have gluing my mouth part togheter but when i try to put the automatic mesh on heavy they won't let me do it. So idk if i can skip this part.
Hi! In the Vbridger part my model's mouth doesn't change shape when I choose another parameter in mouth form and mouth open, for example I did MouthFunnel, and it works well in 0x0, but in 0x1 it doesn't change the shape, it doesn't get smaller like I did, is that normal? or I have to edit each parameter to change shape?
Half of my mouth disappears donehow
You've maybe missed some parameter points when assigning some mouth parts?
@@idogmini after 4 months yes it was that
@@chromei.vomiting glad you were able to figure it out!
hi! so i followed the exact steps for the vbridger parameters and stuff but when i tested my rigged model on vtuber studio it does use the vbridger mouth parameters, the other mouth forms are working fine, how do i fix this?
This is such a great tutorial! It's been so helpful, but I'm running into a problem when making the mouth funnel, the rest of the mouth forms don't change to be funnel shaped(?) they just stay the same Idk what I did wrong 😭
same TnT ... i dont understand why it doesnt work when i did like it was told... i know its been 3 months... but you can try to do it for each keypoint manually... :/ idk any better idea
I made my lips all one piece...guess i can only smile now 😅
I have a problem with mouth press lip open, when i do - 1, my 0 and +1 also tweak. Same the other way around. Does anybody know what the problem is and how to fix it?
Hello, im worried because the mouth X of my model dont work in vtubestudio, what can i do? 😥
literately crying rn when i did that meshin nothing just moves and whole body suddenly moving i tried to move it on my own ways. but also didnt do my lip skins are separated i tried to glue but nothing good happens with it. i have no idea how u make ur mouth line move like that but aadhajksn
Do we need to have Vbridger? I don't have an iphone so putting in $10 on the plugin won't be of use. If we don't, do we skip the Vbridge section all together for all the new mouth parameters or we do them too and it could be of use in other programs?
btw been following the tutorials and it's absolutely wonderful, thank you so much for sharing your knowledge
Vbridger is optional and yes feel free to skip it if you don’t have ios!
@@MerelyWufeii I finally reach the end of your wonderful tutorials and in the midst of that I watched your birthing vtuber vid and i just want to say, I love your passion and your willingness to share your passion with everyone who wants to try. Big brain move since your commisions are full you decided to spread the knowledge, theorically directly indirectly birthing more vtubers, idk you are a wonderful human being, your passion speaks loud and just, thank you for sharing! :>
I just can't ctrl shift c and ctrl shift v
It keeps saying "please copy form before calling"
Ok, for some reason i can do it manually via the menu Modeling -> Edit Form -> Copy Form, and then -> paste form
If you have AMD Adrenaline graphics you need to change the hot keys on adrenaline one of them is also ctrl shift c and ctrl shift v.
Also make sure you are using the monthly and not trial version, trial version will not let you do it.
make sure you click the little drop down arrow and click select on form before you try the Ctrl+shift+C and Ctrl+shift+V stuff. That message is saying you down have a form copied because its not been selected.
@@k_set9549 OMG TYSM U LITERALLY SAVED ME
I didn't understand the "only affects hair xy'S synthesize corners... Drag it back in for that and out again when done" I was hoping you would showcase it but you did not, can you explainwhat I need to do to keep the hair from deforming? If I leave it as is after taking them out of head z the bangs don't more proper when viewing the model posing
Hey did you manage to figure this out?
some of the mouth movement doesnt translate to the x y parameters any help on that?
my bottom lip when i make deform it for the open mouth does a flip.. the skin covers the mouth and idk how to fix it
same, did you managed how to fix it?
Hey again Merely! I got all the way to importing and I’m finally done. Thank you so much for the tutorial you’re an awesome teacher!
The only issue left is that my mouth won’t move. I’m skipping the Vbridger steps so that’s not the problem. When I was editing and following along I accidentally deleted the “Mouth Form” & “Mouth Open” parameters. However, I thought I could simply make new parameters with the same name and did all my work on the new ones with the same Max & Min values. I think that’s why it’s not picking up… is there anyway to fix this? It’s the only issue I’m stuck at now- I’m sorry for the second comment, but I’m not sure how to find a solution anywhere else 😭
If you have the time and see this thank you! If not I’m still so grateful for your tutorial!
Hii great to hear that you completed your model!! 🤩
So when you replace params in live2d, make sure the ID is the same name, as that’s what vts uses to identify the parameter. But for now, you can simply go to vts and relink them to your new parameters. Just find vts params that the input says mouthOpen and mouthSmile ( part 11 at 5:51, the output should be red in your case, if you can’t find them, create new ones) and set the output to the new params you made!
@@MerelyWufeii Omg it worked! I was so scared of having to do it all again but it’s perfect! Thank you for everything. I hope everyone gives you your flowers, because you just started an entire new journey for me. 😭🫶🏻
help, when i tried to create the parameter MouthX i got ''FREE version - the limit of Blend Shape parameters is exceeded (3 objects).
You have assigned 3Blend Shape to the object.
i don't understand HELPPP
🥹please consider the pro version’s free trial, this tutorial isn’t completely doable with the free version-
Heyy I have a question, I did all my head x,y and mouth, but when I turn my head to X my mouth open closes, is there something I did wrong?
Your mouth deformers/layerd should not be rigged onto both mouth open and Angle XY parameters! Either one or the other. I had a separate mouth deformer only linked to Angle XY
@@MerelyWufeii alright! thank you sm :)
When I try to make the first mouth, skin from my lower lip overlaps into it from the bottom, did i go wrong somewhere meshing the mouth or something? :(
Check the layer meshing and see if it’s the mesh dots that are overlapping, if not check if any layers are on top?
doesnt vbridger cost money? TwT
Could you teach me in a video how to configure it in vtubestudio, with these parameters at the end of rigging everything?
same