How to print silicone transfer stickers Silicone transfer stickes screen print by hot melt powder.

Printing tip for silicone transfer stickers printing by hot melt powder
TDS Of XG Transfer Silicone Ink to make stickers by hot melt powder
Transfer sticker printing process:
Silicone ink PET films:
Two types : one is glossy coating film which will be glossy after heating press on fabric ,another one is matte finish effect after heating press on fabric.
Mesh number :for color layer mesh 180-250(60T-100T), for HD clear layer & mid layer mesh 120-150(48T-60T)
Mesh(screen film ) thick screen ,it is depends on printing Artworks.
Squeegee：65-80 degree .
Printing tips:
1.Silicone ink color layer printing for 3-4 layers :
Silicone ink XG-866A-2Y 100G
Pigments or special powders 10-20G (10-20% white&fluorescent 15-20% other colors 10%)
Catalyst XG-866B-2 2-4G 2-4%
Thinner XG-128AH 10-20G 10-20%
Flash by 100 to120 degree.
2.Silicone ink clear layer printing 2 -10 layers or more if need more high density then print more times clear.
Silicone ink XG-866A-2Y 100G
Catalyst XG-866B-2 2-4G 2-4%
Thinner XG-128AH 10-20G 10-20%
Flash by 100 to120 degree.
3.Mid layer printing wet on wet 2 layers.
A:Transparent silicone & catalyst and adhesion agent & harder as mid layer printing:
1). Silicone ink XG-866A-2Y 100G
Catalyst XG-866B-2 1- 2G 1- 2%
2).Bonding agent A XG-180A 50G
Bonding agent B XG-180B 5G 10%
Mixing together for printing :Bonding agent AB according to silicone is 50%. Bonding agent B is harder can get silicone ink dry, so if need longer printing time then get silicone catalyst mixing ratio 1% or no need silicone catalyst.
B: Crossing linker & catalyst as mid layer printing
Crossing linker XG-360z-3X 100G
Catalyst XG-866B-2 5G 5%
Printing wet on wet for 2 times， keep 100% wet can not heat:
4.Spill hot melt powder on wet silicone and adhesion agent layer immediately.
5. After finish, to put into the oven to bake by 130-150 degree for about 2-3 minutes,if bake higher temp then less time,once hot melt powder 100% melt then it is ok.
6.Press the stick on the heat transfer press machine by the temp of 160-170 degree for 10-18 seconds with pressure of 4KG.
TIPS:Kindly doing test before the bulk goods printing every time.
For more silicone ink information kindly refer to my blog:
screenprinting...
If any needs or questions about silicone ink kindly contact with :
Belinda [phone] wechat and whatsapp the same number.

[@RehmaAli-xx4zb]

We need silicone ink and hot melt
Power

[@caknelson2254]

Can you make the transfers and I buy them?

[@xgsilicone-printingsiliconeink]

My friend factory make this, kindly get me your email address. My whatsaap [phone]

[@xgsilicone-printingsiliconeink]

He makes 3D molding transfer silicone stickers too. You will like them.

[@kidslandview3456]

Please glue name