Merry Christmas! I recommend using a macro that spams the conveyor for you IF THE BUILD BECOMES UNCONTROLLABLE WHEN USING THE CONVEYOR REMOVE ALL DEFAULT LANDING GEAR If your plane is not maneuverable enough for this: A) Add ballast to the nose and balance it out with wing panels B) Increase elevator motor2 angle C) Add control surfaces/propellers
@@lucienpapercraft5171 this is just a theory but I'm pretty sure it keeps most of the momentum that you had keeping you going the same way no matter your rotation
Hi, I’m here to correct something. Instead of using conveyors you can just use (small) propellers to achieve the cobra or super maneuverability that is. Second, you can either use traditional thrust vector or use propeller guided maneuverability. The thrust vectoring part is optional is might not be needed in most airframes (builds) but I recommend not to put the thrust vectoring part for maximum compatibility as it can be a little bit too much of a struggle or problem on other builds. That is all, Thank you in advance if the creator of this video reads this. P.S - I’m sorry if I have some mistakes in my correction. Thank you!
The thing is, alot of propellers makes your game lag and doesn't achieve as good of an effect as conveyors, aswell as it's not nearly as smooth, powerful at high speeds as thrust vectoring
Hey when i make my cobra manuever using a thrust vector, when i activate using conveyor my entire build glitched out. I have motor 2 to control my surfaces. I also use the Thryst vector My build is just a frame Can u tell me what im doing wrong? What should i set my macro to?
Add weight so it's balanced, not in the back Conveyors lock the movement of your plane in one direction creating massive angles of attack, although you need weight for the airplane not to gain altitude
@@pro_gemer alr thanks, but my plane keeps trying to spin around a lot especially after I add ballast or such stuff like wing panels in the nose. How can I fix this?
I did not need thrust vectoring to do cobra,kulbit and kvochur bell manuver.Maybe i did it bc i use a namnam ch style jet.But still thank you for the guide :)
i have a problem with the thrust vectoring, i only was able to fit it if the motorlock tower goes from left to right, not right to left. i see in the video that you managed to fit it with the tower that goes right to left, how did you manage to do it.
@@pro_gemer what i mean is that the tower GOES from bottom left to top right, that doesn't work for me, i only managed to make it work with a motor lock tower that goes from bottom right to top left, both when you look at it from the left
This doesn’t work on any of my jets (also can you make a simple jet so we can have a base idea for other jets since I still have no idea how to apply this to my jets also when we want to do the cobra what keybinds do we do for conveyor)
This won't work on all planes, that's one quirk of plane crazy Would be glad if you made a detailed description on what happens so I can actually help and no, I don't make tuts
![Minecraft but it's 100 Years Villager War [FULL MOVIE]](/img/n.gif)
Merry Christmas!
I recommend using a macro that spams the conveyor for you
IF THE BUILD BECOMES UNCONTROLLABLE WHEN USING THE CONVEYOR REMOVE ALL DEFAULT LANDING GEAR
If your plane is not maneuverable enough for this:
A) Add ballast to the nose and balance it out with wing panels
B) Increase elevator motor2 angle
C) Add control surfaces/propellers
I told him to add that :)
Quick question, whats a macro I could use? Ive tried one but it just doesnt work
@@infraparadoxx you can use autohotkey or your mouse/keyboard driver
1) Wait, conveyor is just default setting?
2) Ik the the conveyor pushes the plane further, not stall, but how does it work exactly?
@@lucienpapercraft5171 this is just a theory but I'm pretty sure it keeps most of the momentum that you had keeping you going the same way no matter your rotation
The thrust vectoring is so small, I could actually add it to my mini su 57 :D
Thanks! im planning to make a super manueverable a380 and im glad i had this guide
Emirates would like to hire you
hey! you wont need to add ballast!
@@udsoncamp3202 for clean and long cobras you need it, for very basic ones yeah no need for em
@@pro_gemer yeah but it's an a380
uhm
If you want the vectoring to be stronger just change the max angle for the motor 2s on the side
I used an old su 35 for this and it works amazing if you see an over locked blue nam nam jet it’s probably mine
You can also use the new gyros, they work the same but more simple
thx for the guide i really appriciate the guide and i used this to my f-22 :)
Glad I could help ;]
Ive been trying t o make an SU-35 that was able to do a cobra, this helped me alot thank you
The same for me
Yo I’m from Australia and Christmas is on the 25th yk what that means, I have to wait till 25th at like 5pm
Just going to say it, you are a lifesaver bro.
finally a tut helped my jet do make my OWN COBRA
i call it the kinfe attack'
that su27 is epic and nice tut it helps alot
Can u pls do tut on the plane
I hope this vid blows up
Happy Christmas eve
You too :D
You too my guy hope you enjoy it
You too
"It's like Christmas morning"
vectoring thrust would be cool
Erhmmmm, actually it's "thrust vectoring"🤓☝️
🤓👌
thx i'm planning to make my favorite su-27
I did this with madvulpens’ f-22 plus vapor trails, looked awesome
Glad to hear
now I found a different way to kulbit, I just added a lot of ballast block and thrust vectoring.
BRO THANK U THIS HELPED ALOT!!!
Bro with the music thought this was an Episode of how its made \:
thank u for ur help i will sub and like ☺ ☺
If you have any questions feel free to ask
thank u @@pro_gemer
this really helped me with cobra-ing tysm pro geer
Glad to hear! :D
here before this releases
very big thanks i now have my first supermaneuverabitle plane
HES THE CHOSEN ONE
very tenks to pro gemer for make my suka 27 cornflanker cobra
I made a nam nam jet with a bomb half the size of the plot and some how can cobra in it
thanks i did the cobra maneuverr
Also, how did you made the thrust vectoring thing that small and compact on the last video
Will be in the video :)
Ooh okok
ITS HERE
Finally i can add it to my Su-35
:D
we will find out tomorrow :>
thx i need this for my rocketship
why is this channel so underrated
:D
sad thing is like 2 years ago this was crazy now people make tuts
fr though adding the whole obese us citizens onto a lightweight jet make it supermaneuverable
Thank u bro i can finally cobra and more ◕‿‿◕
Ah... very.. interesting....
Hi, I’m here to correct something.
Instead of using conveyors you can just use (small) propellers to achieve the cobra or super maneuverability that is.
Second, you can either use traditional thrust vector or use propeller guided maneuverability.
The thrust vectoring part is optional is might not be needed in most airframes (builds) but I recommend not to put the thrust vectoring part for maximum compatibility as it can be a little bit too much of a struggle or problem on other builds.
That is all, Thank you in advance if the creator of this video reads this.
P.S - I’m sorry if I have some mistakes in my correction.
Thank you!
The thing is, alot of propellers makes your game lag and doesn't achieve as good of an effect as conveyors, aswell as it's not nearly as smooth, powerful at high speeds as thrust vectoring
@@pro_gemeri agree since I AM 15 FPS
If I spam my keybind for conveyor it just snaps into different positions and it doesn't fly smooth
my plane now can cobra thank u
:D
I jus watch dis becuz is epic!,!,!!,,
Happy Christmas Eve and Christmas y'all
I got 3 questions: 1 does this work on Heavy motorlocked builds? 2: Does Roscale builds also work? 3: what if my aircraft is already super heavy
1 yes
2 yes
3 no need for ballast unless your aircraft climbs in altitude while doing a cobra
Ok
it worked on my L-1011 tristar :D
Thanks it works
Well thanks! so now i can show to my freind this video, that he really wanted to knew how to do that! thank you :D
Ayyy
cool cober
I already tried it, it’s basically that
Can you just slap a conveyor on the jet or does it have to be like a conveyor engine or facing a certain way 0:39
it is not a conveyor engine, a singular conveyor instead
Ur best video
wat do you maen spamming? what is a setting of conveyor?
Quick question: do you need to have disconnector wings to make it fully work?
There's no reason not to use them, for clean and decent distance cobras I'd recommend you using em although it's not a necessity
@@pro_gemer ok thanks
@@pro_gemer also last question, when clicking the conveyor key, do we click the forwards or backwards jet for the conveyors
@@theproatthegame6160 doesn't matter at all
@@pro_gemer ok thanks
Hey when i make my cobra manuever using a thrust vector, when i activate using conveyor my entire build glitched out. I have motor 2 to control my surfaces. I also use the Thryst vector
My build is just a frame
Can u tell me what im doing wrong? What should i set my macro to?
uh im not sure, try removing default landing gear blocks since they glitch out most of the time
thx now my f-104 can cobra
Two questions:
1. What do the conveyers actually do?
2. Wouldn’t adding weight to the back just make the plane unstable and not fly straight?
Add weight so it's balanced, not in the back
Conveyors lock the movement of your plane in one direction creating massive angles of attack, although you need weight for the airplane not to gain altitude
@@pro_gemer alr thanks, but my plane keeps trying to spin around a lot especially after I add ballast or such stuff like wing panels in the nose. How can I fix this?
@@TRtraybloxeey which way does it flip?
@@pro_gemer it just spins, like rotates along the horizontal axis to the left or right
@@TRtraybloxeey seems like it's unbalanced or has too high center of mass
Very cool modification, would be amazing for cinematics and showcases but kinda useless for PVP
"useless for pvp" it works the same way as real life.
@@sirenheadbutnot then he is right, useless for pvp
@@bionicphantom4143 if you’re lucky, you can do a funni kulbit bc why not and a Mach 5 jet targeting you without you knowing would zoom under and pass
@@theproatthegame6160 Still better for airshows, but thanks, if I manage to make a decent jet I'll try it
@@bionicphantom4143 k
WOOOOOOOOOOOOOO
nice jet
the splatoon music💯💯💯💯💯💯🤑🤑🤑🤑🤑🤑🤑🤑🤯🤯🤯🤯🥵🥵🥵🥵
banger
my su-27 can cobra without thrust vectoring should i do tut
prro gameer i got questions it donw work whit wedge conveyors?
Idk it works for me
tested it on my su 57
i can see the difrence
i think its a good mod on jet
I did not need thrust vectoring to do cobra,kulbit and kvochur bell manuver.Maybe i did it bc i use a namnam ch style jet.But still thank you for the guide :)
Its possible without it but it's much cleaner with it :]
@@pro_gemeroh ok I just can't fit the thrust vector in my plane though
i have a problem with the thrust vectoring, i only was able to fit it if the motorlock tower goes from left to right, not right to left. i see in the video that you managed to fit it with the tower that goes right to left, how did you manage to do it.
I used a vertical tower lol
@@pro_gemer yes ik
@@pro_gemer what i mean is that the tower GOES from bottom left to top right, that doesn't work for me, i only managed to make it work with a motor lock tower that goes from bottom right to top left, both when you look at it from the left
bro did you put keybinds on conveyor because I really need it except the weight and the small tvc
edit : I mean did you put it or not
On either side make it anything you can spam
@@pro_gemer >:D Man I did it on my own long "nam nam" jet
and....
I think put did it too much because I put propeller on rear wings 💀👍
Is this work at a bigger jet?
Ye it does although you have to change up the thrust vectoring a bit if you want o
pro
Hey is there a certain configuration to the conveyors?
I’m gonna make a cobra able car (don’t ask why)
why
Isn't that a wheelie with a rear bumper slide?
Epic wideo my friend. Btw ehen you coming?
I'm always coming
@@pro_gemer same my man im coming right now as we speak :)
waiting too
do this plane on keyboard control or mouse control?
its keyboard control im 99% sure
Works with mouse
how to make 1:1.8 scale su-35 flanker e cobra i cant get enough maneuver
I made my ryan air 737 do a cobra
Can i know do i need turn on/off thruster or normal thruster
I think I saw u in pvp
Could you make a tutorial on the jet you show in this video none of my jets cobra with the blocks you told me to add
also whats was the camoflauge can you give in colour code
Can you please make a tutorial on the plane? I really want to build it, but dont have any ideas on how to make something like that.
start out with something simpler, you wouldnt really learn much from copying something that you dont know how to build yourself
Don't worry, ive built more complex things than that, and i do learn from watching tutorials.
Did you use trapdoors as wings because I'm trying to make a plane decated to this but i wana know
Also when i try to cobra i just go up
nvm i just had to like tripple the weight lol i think its bc i was useing a nam nam jet so it was very very lite
i used disconnector wings as they have many advantages
Can you please help on why my plane yaws on my kulbit and cobra? i have removed all my verticle wing panels except my rudders and i still yaw a lot
well idk why it happens to some planes alot sorry cant really help
Too much weight ermm...
Whats the color of the nozzle
I cant find the color thats similar to the black emoji
Anywhere from 40 40 40 - 60 60 60 should do fine, for more precision you can use a color picker tool on the black square instead
How to fix the wobble 😭 my SU-35 not wobble so bad while doing it
i need help on where to put the thrust vectoring on my jet since it always bugs out and goes a block above where it’s supposed to go :(
it is not necessary to have tvc
one of the first 50 commens
It’s called the kvoher bell
:) calmly waits
Will this be stable for mouse control?
it will be harder to use but yes, you can use it with mouse
Whiz brother
Question: where do i place conveyors on a non motor lock build.
Inside the plane or as the intakea
my internet is working and now i can do cobra but im going to ask 1 question is why does my jet wobble back and forth when i do cobra?
Wing panels in the nose maybe
This doesn’t work on any of my jets (also can you make a simple jet so we can have a base idea for other jets since I still have no idea how to apply this to my jets also when we want to do the cobra what keybinds do we do for conveyor)
You set the conveyor to any keybind (doesn't matter if it's forward or backward) and spam that key while pulling up
What speed for the conveyers and do i turn on toggle?
Settings dont matter, I just leave them on default but change either of the keybinds
@@pro_gemer thanks
this guide was really good btw it helped me alot
@@simplybutter1 ❤️❤️
can you make a tutorial on this plane or one that can cobra i cant seem to do this to my jet
This won't work on all planes, that's one quirk of plane crazy
Would be glad if you made a detailed description on what happens so I can actually help and no, I don't make tuts
what settings on the conveyors?
prob default, i think you should try all the settings.
It's default, he replied to someone just use a key bind that you can spam quickly.
as the others said its default, just change the keybinds
i dont know if anyone asked you this but can you make a tutorial on that jet youre useing in the video
can i make the thrust vectoring mouse controlled?
Yeah go for it