안녕하세요 방문 감사드립니다. 아시겠지만 요즘 정밀 모형 키트 가격이 많이 비싸지고 있어요. 타미야 48스케일 에어로가 10만을 넘어가 버리죠. 거기다 별매 디테일 업 제품까지 구입하구 도색으로 완성한다면 아이템 하나에 수십만원이 들 수도 있습니다. 그래서 출시된지는 좀 되었지만 가성비 좋은 블랙호크를 작업해봤네요. 관심있게 봐주셔서 감사드립니다^^
Oh ok, thank you. Was it a specific motor or just any micro-motor? And was it attached to a crown gear like with the main rotor? Thanks again@@1dragon409
Hello:-) I have seen a picture of a blackhawk with motorcycle before. I build it because I thought it would be useful to have a motorcycle in a combat area such as a desert or rough terrain.
Wow, i was so impressed with the detail and then all of a sudden see it is motorized. So impressive! Looking forward to seeing it painted.
I'll upload blackhawk when I paint it:-)
ЗОЛОТАЯ НАГРАДА!!!
Absolutely genius!
....блестящая работа!....
이제 디테일업은 끝난 것 같군요. 엄청나네요.
박수를 보냅니다.~~!!👏
고된 작업이었으나 디테일업 스킬을 많이 배웠습니다^^
Wow... The details are awesome...
Amazing work!
Thanks a lot!
우연히 보게 되었는데, 너무 디테일한 부분이 많아서 깜짝 놀라고 갑니다!! 특히 메인랜딩기어 브레이크라인 연결하신거, 조종석 도어 수납함까지...👍👍
안녕하세요 방문 감사드립니다.
아시겠지만 요즘 정밀 모형 키트 가격이 많이 비싸지고 있어요.
타미야 48스케일 에어로가 10만을 넘어가 버리죠. 거기다 별매 디테일 업 제품까지 구입하구 도색으로 완성한다면 아이템 하나에 수십만원이 들 수도 있습니다.
그래서 출시된지는 좀 되었지만 가성비 좋은 블랙호크를 작업해봤네요.
관심있게 봐주셔서 감사드립니다^^
@@1dragon409 넵. 도색까지 응원하겠습니다!!
이야,우와,와!
메인로터 블레이드는 어떻게 개조했나요??
명예로운 기술자 이십니다 !
We have used plastic plates and copper sticks.
Wow great build
Thanks a lot 🙏
멋지네요 👍👍👍
Awesome detail work. Does the chopper carry a motorbike as a makeshift missile against other choppers, Expandables 2-style?
Hello😊
The motorcycle is used to conduct operations in rough areas.
at 4:45, the #4 and 5 drive shaft covers open in the wrong direction. where is the disconnect shaft?
❤love🎉
와 진짜 ㅈㄴ 멋지다
Awesome job on your helicopter. Love to see you do that to the new Kitty Hawk MH-60L kit. How did you motorize it?
Fa-13 motor, mini motor, crown gear, etc are used. It's not difficult:-)
I'm amazed by your work but I have been trying to figure out how you powered the tail rotor. Is there a separate motor in the tail?
Yes, u are right:-)
A Micro-motor was used.
Oh ok, thank you. Was it a specific motor or just any micro-motor? And was it attached to a crown gear like with the main rotor?
Thanks again@@1dragon409
@_rocketpod Just any low price motor.
No crown gears,
Attach the gear directly to the motor shaft.
바이크가 탑승하고 있군요 ㅎㅎㅎ 도색완성된 모습이 벌써 궁금해집니다 ㅎㅎㅎ
지쳐서 좀 쉬었다 도색 달려볼게요^^
awesome work Dragon, cant wait to see more, one question, what are the motorcycles did you use?
Hello:-)
I have seen a picture of a blackhawk with motorcycle before.
I build it because I thought it would be useful to have a motorcycle in a combat area such as a desert or rough terrain.
@@1dragon409 you got me to thinking maybe I could try and do the same thing, if I can find the motorcycle's you used, keep up the good work.
@@christopherhayes3742 The kit is Tamiya 35245 JGSDF Motorcycle Recon Set.
Good luck and thanks a lot 😊
@@1dragon409 exellent, thank you very much
at 3:20, what happen to the oil cooler fan?
Nothing!
Is the academy better than the kittyhawk one?
Yes, it's better. But expensive
뭘 본거죠?
잘보고 있어요~~ 도색을 어찌할지 궁금하네요~ 전 조립하면서 도색하는지라
안녕하세요.
세가지 경우를 생각해보고 있는데 내부도 재현해서 일이 많겠네요^^
1. 올리브드랍 캔스프레이
2. 무광검정 캔스프레이
3. 올리브드랍 + 무광검정 조색 에나멜 붓도색
Are you an engineer?
Hello.
economics and law:-)
@@1dragon409 I'm a teacher in high school but so do I, like you. Nice to meet you. excellent job! I press 'like' and 'subscribe'
작정하고 디테일업 하시네요. 작살나네요.
안녕하세요.
공부하면서 도전해봤습니다.
사실 디테일업 작업은 제대로 해본적이 없어서 열심히 해봤네요^^
Hi 👋 nice model
How much is this black hawk
Hello :-)
The kit was approximately 23 dollars in Korea.
@@1dragon409 are you in 🇰🇷 Korea