⛐ Check out our Garage to see what tools we use and recommend: www.amazon.com/shop/worldmechanics ⛐ Subscribe and hit the notification bell by the subscribe button for new videos: ua-cam.com/channels/k_lcDzEWLs5fVRYceK3-9Q.html ⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
My man I got a problem with a Cruze 2016 that is trowing codes P0270 P0267 P0264 P0261 They checked the fuses and found that it was blown but when we replaced the fuse it blew again right when the car started so the car won’t start cause it keeps blowing the fuses what could I do I hope you could help my man thanks for your time
My 2015 Cruze does the same blows fuse for #1 injectors and ...check this out..it literally blows out the end of the coil pack .went through 3 coil packs now..tests says cylinder 1 misfire and high voltage coil pack. I've checked all connections took apart wire harness didn't find any shorts..what's happening?
Threw my scanner tool at my friend's '11 Cruz and a P0067 code came up, but I didn't think of checking fuses.. Also found a thin black cable connected to the negative post broken, then to top it off we found a crack in the radiator!
Im currently going through the same problem with the 67 code. My car isnt picking up speed but everything seems to be ok from the fuel tank to the engine. Could it be the fuse??
Hi I have a chevy cruze 1.8 62plate my car was lagging when changing gear like I wasn't accelerating. I have changed the spark plugs and the coil pack but my car is still eating the petrol never had this problem what could it be? Tia
My shade tree mechanic says that my cruze is throwing codes that say Low voltage to the injector, 1, 2, 3, 4. I just put in a new coil pack and new spark plugs and a valve cover. I am getting the "service stabilitrak " message. Car cranks, but does not start. Need help with understanding the problem. Tomorrow I will check the fuses.
⛐ Check out our Garage to see what tools we use and recommend:
www.amazon.com/shop/worldmechanics
⛐ Subscribe and hit the notification bell by the subscribe button for new videos:
ua-cam.com/channels/k_lcDzEWLs5fVRYceK3-9Q.html
⛐ Our GoFundme Page: www.gofundme.com/auto-repair-guys
I guess this is a common issue on the Chevy fuse what's going on to make the fuse blow is it a short in the wiring harness
My man I got a problem with a Cruze 2016 that is trowing codes
P0270
P0267
P0264
P0261
They checked the fuses and found that it was blown but when we replaced the fuse it blew again right when the car started so the car won’t start cause it keeps blowing the fuses what could I do I hope you could help my man thanks for your time
Make sure that the Cruze, cruises to Hell
My 2015 Cruze does the same blows fuse for #1 injectors and ...check this out..it literally blows out the end of the coil pack .went through 3 coil packs now..tests says cylinder 1 misfire and high voltage coil pack. I've checked all connections took apart wire harness didn't find any shorts..what's happening?
@@thunderchild321 Did you fix your issue?
How did you fix this issue?
Threw my scanner tool at my friend's '11 Cruz and a P0067 code came up, but I didn't think of checking fuses.. Also found a thin black cable connected to the negative post broken, then to top it off we found a crack in the radiator!
Im currently going through the same problem with the 67 code. My car isnt picking up speed but everything seems to be ok from the fuel tank to the engine.
Could it be the fuse??
I have a cruze LT 2016 can you do one on those plz
how can you find out if only one fuel injector is bad or do you have to change all four of them or can you just change the one it's bad
Scan it. Depending on what scan tool it should tell you exact cylinder that is bad so you can replace that one.
Hi I have a chevy cruze 1.8 62plate my car was lagging when changing gear like I wasn't accelerating. I have changed the spark plugs and the coil pack but my car is still eating the petrol never had this problem what could it be? Tia
What's the label for fuse
I got problem of current not coming in injector no.2 & 3 what might be the problem?
My shade tree mechanic says that my cruze is throwing codes that say Low voltage to the injector, 1, 2, 3, 4. I just put in a new coil pack and new spark plugs and a valve cover. I am getting the "service stabilitrak " message. Car cranks, but does not start. Need help with understanding the problem. Tomorrow I will check the fuses.
Theres a video i saw covering it . That helped wirh my problem big time
🙂👍