@@Apache-Helicopter-Life yeah I ordered the day I got the email… I usually get stuff from Veto pretty quickly, must have a good shipping route between me and them.
We were promised bigger and we got it. My initial thoughts were is this gonna be tp3 levels of some pouch and its still smaller. If you run consumables you owe it to yourself to run some bin or plastic storage from the kitchen to make it so you can remove it easy. Looks solid and I will ponder it.
Its about the clip placement for me. The DP3 and A TP3 the clip was just in a weird spot. Had to have a MadPak or use a separate belt It's Bigger, but not undoable Big (My opinion)
Seems like they are bringing quite a bit of new stuff out this year. Have you tried to fit any of the small Klein Knect sets in the larger pouch, might be interesting for motor maintenance loadouts, if they did.
@@toolsintheartic8087 I have been using the MP2x a lot in the last year or so. It’s a good pouch. Rays Apartment Maintenance said he ordered a MP3, maybe he will put out a video soon
I’ve been using the MP1X with the Holstery belt and Joey pouches for my small equipment tools. I often throw em over my shoulders almost like a sling. I’ll have to check this one out for my meters thanks for the video.
Easy questions (maybe show it in the live) does fit a m12 surge or dewalt gyro well? Sot some of thoes rubber end parts tube's that are common if so jam one of thoes in it. How ridiculous does a volt claw look in it. That should get the ball rolling for some demonstrations. Thanks for your great modeling looking like someone who's ready to work.
I wish ever single external pocket was passthrough. I carry long Wera drivers in MP1 and it's a pain trying to fit multiple drivers into each of the two passthrough pockets. I'd also love a canvas bag to put the MP (and tools) into, for throwing the MP into the car without risk of any tools falling out.
I have 2 veto pouches, but i really enjoy using my joey pouch more. I have 2 attached together one for wire nuts and the bigger one for tools. I just bought version 2 of their magmaster. Solid build. Like it better than their pro version.
Going to buy my first bag of theirs during the spring promotion, can't wait!! Probably the new red/black with side pockets. Is it pronounced veeeetoe? Or vetoh? (Veterinarian)
Hmmnm I need to think about 1 of these. I have some tools for a specific purpose in my vehicle. I rarely need them so I have them in 2 Klein type zippered bags. I could probably get them all into the MPMX. I don't need to wear it just to keep the tools in one place. I have a huge Veto TECH TT for my main bag that's already over stuffed.
Great look! I was able to stuff my RJ45 crimper into my MP1X, so I may not need this one after all. Actually I'm more inclined to try the MPX, because configured just for a network job, my MP1X has free slots. Will a typical cheap 6-compartment parts box fit in that big pocket? That would be nice...
Hello, I like your videos But I have a question for you if you can help me, I am looking for very good screwdrivers or Torx bits in the smallest sizes T3 T4 T5 T6 it is for opening and working on EDC knives last time I bought Klein Model No. 32717 And the bits were all damaged, bent Thank you in advance for your good advice.
@@customdesignnabelsi3613 I don’t have a ton of expertise with a lot of different Brands or precision driver bits… but I bought this adapter amzn.to/3PDDqMU I really like it because most precision bits are 4mm (except the Kleins) and it allows me to use whatever brand bits with any screwdriver I have that accepts 1/4” shafts. So that allows you to find good bits, and a good screwdriver handle and combine them
@ Awesome, Thanks for the excellent content. Thinking about picking up one of the smaller veto mpx pouches you contrasted in earlier video. I love my veto pro pac bag, a small grab pouch would go great for small tasks.
Great video, great to see the size. I've been wanting to see this close up with tools loaded in it.
@@projectpinehills 👍👍
Man you got it already! Super stoked.
@@Apache-Helicopter-Life yeah I ordered the day I got the email… I usually get stuff from Veto pretty quickly, must have a good shipping route between me and them.
We were promised bigger and we got it. My initial thoughts were is this gonna be tp3 levels of some pouch and its still smaller. If you run consumables you owe it to yourself to run some bin or plastic storage from the kitchen to make it so you can remove it easy. Looks solid and I will ponder it.
Its about the clip placement for me. The DP3 and A TP3 the clip was just in a weird spot. Had to have a MadPak or use a separate belt
It's Bigger, but not undoable Big (My opinion)
Thanks, man! Stay warm out there!
@@toddturner503 it has been a bit cold… next week is supposed to be brutal 👍
@@MORGANSMaintenance N IL is waitin for the blast 🥶
Seems like they are bringing quite a bit of new stuff out this year. Have you tried to fit any of the small Klein Knect sets in the larger pouch, might be interesting for motor maintenance loadouts, if they did.
@@three-phase562 I show putting the KNect starter kit in the last Live. That size box is probably the biggest of those that will go
Good video Joey ,ofc you already got your hands on this one .Going to be a good year bud !
@@quiseplumbs appreciate it 👍
Hey Joey. Great video and just wanted to say im rocking the mp2x and considering the mp3x
@@toolsintheartic8087 I have been using the MP2x a lot in the last year or so. It’s a good pouch. Rays Apartment Maintenance said he ordered a MP3, maybe he will put out a video soon
As soon as it popped in my email… no hesitation bought, should be delivered on Tuesday 😎☕️
I was the same… in fact Vetos website was messing up while I was trying to order, I though they were maybe busy
I’ve been using the MP1X with the Holstery belt and Joey pouches for my small equipment tools. I often throw em over my shoulders almost like a sling. I’ll have to check this one out for my meters thanks for the video.
👍👍. You are welcome. That’s a good combo
An instrumentation friend of mine is considering the mpmx.
He uses a 773 in field checks and already has an mp2. So this looks to fit his style
The pocket was bigger than I expected, I think it will hold several meters out there
Very cool ! Thanks Joey!!!!
@@leonardpaciora5039 👍👍
Easy questions (maybe show it in the live) does fit a m12 surge or dewalt gyro well? Sot some of thoes rubber end parts tube's that are common if so jam one of thoes in it. How ridiculous does a volt claw look in it. That should get the ball rolling for some demonstrations. Thanks for your great modeling looking like someone who's ready to work.
@@MattHmm-rq6dn 👍👍
I wish ever single external pocket was passthrough. I carry long Wera drivers in MP1 and it's a pain trying to fit multiple drivers into each of the two passthrough pockets. I'd also love a canvas bag to put the MP (and tools) into, for throwing the MP into the car without risk of any tools falling out.
I would like that myself 👍
I have 2 veto pouches, but i really enjoy using my joey pouch more. I have 2 attached together one for wire nuts and the bigger one for tools. I just bought version 2 of their magmaster. Solid build. Like it better than their pro version.
I use them all the time too, more for parts.. but they are great
Another idea... could you fit your M12 impact in the meter section? (with one of the small batteries, battery end down into the pouch)
That’s the only way it fits, and show it in this live
ua-cam.com/users/liveuN-UDNH2MM0?si=kI4O9HNW5awStwfg
I actually had it sitting next to me while I was filming because I planned to show that.. then I forgot 🤦♂️
@@MORGANSMaintenance of course the one live that I don’t watch and you show the answer 🤦🏼♂️ thanks
Going to buy my first bag of theirs during the spring promotion, can't wait!! Probably the new red/black with side pockets. Is it pronounced veeeetoe? Or vetoh? (Veterinarian)
@@PhNatiK both those look the same to me 😂… but I think it’s more Vetoh
Hmmnm I need to think about 1 of these. I have some tools for a specific purpose in my vehicle. I rarely need them so I have them in 2 Klein type zippered bags. I could probably get them all into the MPMX. I don't need to wear it just to keep the tools in one place. I have a huge Veto TECH TT for my main bag that's already over stuffed.
@@scotts4125 I leave these clipped in my truck and grab tools out all the time when I’m not wearing them
Great look! I was able to stuff my RJ45 crimper into my MP1X, so I may not need this one after all. Actually I'm more inclined to try the MPX, because configured just for a network job, my MP1X has free slots. Will a typical cheap 6-compartment parts box fit in that big pocket? That would be nice...
@@OnusBones it’s a pretty good size pocket. That bigger half of my Klein Tracer is 3-3/4 w x 7H x 1-3/4 D
Yes yes yes. ❤😊
@@GustyOinker 👍👍… couldn’t wait till spring 😂
@ lucky lucky
I have the mp3x coming 😅
@@Raysmaintenance 😂😂👍
Great 👍 save me the hassle of ordering it till I can see it.
@ 😆
Hello, I like your videos But I have a question for you if you can help me, I am looking for very good screwdrivers or Torx bits in the smallest sizes T3 T4 T5 T6 it is for opening and working on EDC knives last time I bought Klein Model No. 32717
And the bits were all damaged, bent Thank you in advance for your good advice.
@@customdesignnabelsi3613 I don’t have a ton of expertise with a lot of different Brands or precision driver bits… but I bought this adapter
amzn.to/3PDDqMU
I really like it because most precision bits are 4mm (except the Kleins) and it allows me to use whatever brand bits with any screwdriver I have that accepts 1/4” shafts. So that allows you to find good bits, and a good screwdriver handle and combine them
What’s that electric screwdriver on the load out? Is it a vessel?
Yes - This one
ua-cam.com/video/FW-QN-nI-Mk/v-deo.htmlsi=JqkAGLEPrF-8gywa
@ Awesome, Thanks for the excellent content. Thinking about picking up one of the smaller veto mpx pouches you contrasted in earlier video. I love my veto pro pac bag, a small grab pouch would go great for small tasks.
Does a m12 drill or impact driver easily fit into the big pocket?
I will show in the live… I actually had that sitting next to me and forgot… kinda, and not really
@ I saw that in the video and hoped you’d try it. I’ll have to watch the live video replay
I may be having second thoughts. It's definitely larger than I was anticipating. Thx for the review. 🧰
@@terryburton8072 👍👍