Lowden guitar repair | Neck Reset | Bridge lifted | Refret Part.2【吉他修理人 | GuitarRepairmanTW 】

-Part 2
主要展示的工序有
．fret拆除
．整平指板
．安裝fret
鉅細靡遺的觀察，記錄指板的幾何與fret的平整度，盡可能的拆解每個工序並測量，以確保每一步驟的品質都在控制之下。
比方說指板畫粉筆這部份，也許磨到粉筆不見就代表已經磨到位，平整了，但事實真是如此嗎？如何驗證他有平，或是沒有平，記錄數據就起到很重要的輔助做用。磨弦枕也是同樣道理，無論徒手磨還是用輔具夾著磨，都需要再驗證是否平整！
The main processes demonstrated are:
．Removing frets
．Leveling the fingerboard
．Installing frets
A meticulous observation and recording of the fingerboard's geometry and the fret's flatness are essential. Every step is as deconstructed and measured as much as possible to ensure each step's quality is under control. For example, during the chalking of the fingerboard, one might think that once the chalk is gone, the surface is leveled. But is it really so? How do we verify it is leveled or not? Recording data becomes a crucial aid in this verification. The same principle applies to polishing the nut. Whether polishing by hand or using a jig, it is necessary to verify if it is flat!
#lowdenguitars
#neckreset #bridgelifted #refret
#高雄專業木吉他維修調整
--------------------
Focusing on Acoustic Instruments
Repair / Restoration / Setup / Courses
By Appointments Only.
Kaohsiung City, Taiwan🇹🇼
Instagram ► / guitar_repairman_tw
Facebook ► / guitarepairman
✅ 預約系統
lin.ee/neFxGm6
✅ 官方網站
gtrmtw.com/
✅ 一些其他的
linktr.ee/gtrmtw

[@peterjames2580]

Nice work!

[@derder510]

請教師傅4:10那邊先注膠水到溝槽的步驟 目的是什麼呢?謝謝~我以為會直接清理溝槽

[@gtrmtw]

主要是黑檀較脆，fret拔出時很容易撕裂，外觀沒異狀也可能有暗傷，膠水起到黏回和加固效果以減少後面工序再次導致撕裂的機率

[@derder510]

@@gtrmtw 好讚 非常細節!經常看國外一些refret也很少看到這個步驟