Good evening, when building the 7000w dimmer, you used any Diac - DIode AC switch, correct? I used it and it didn't work, it burned! Can you tell me exactly what value you used for the video dimmer? Thanks.
hello Is it possible to connect a 1 M ohm variable resistor to this circuit? How many K ohms is the constant resistance and how much is the power (watts)?
hello RJ...i followed your circuit and made one myself...it is working but it has a hissing sound and it does not go all the way to zero volt ac...can you help fix these two issues of the hissing and not going to zero volts...thanks.
Please Sir , Can I use this Circuit to Dc regulation of around 48v , I mean that volts that come out of Energy Saver bulbs circuit board to its Led , that volts
@@RJEDITALL perfect, but you have to say it, too many people likes your videos in the all Americas, it's just an advice, anyway keep doing great, but don't forget what I tell you, best regards.!!
@@RJEDITALLOi AMIGO! Gostei muito do seu circuito, pois ele serve para diversas aplicações. Eu tenho um semelhante ao seu, mas como eu pretendia operar com uma corrente elevada, experimentei empregar dois TRIACs BTA41 em paralelo, ou seja, pino 1 com pino 1, pino 2 com pino 2 e pino G com pino G. O restante do circuito não foi alterado. Estou usando , já há algumas semanas, sem problemas.
Tengo un problema con mi circuito , hice y utilicé los mismo componentes, pero , en mi caso la tensión de entrada es de 220v y cuando intento regular la salida , hace picos de 300v y no se puede graduar mediante el potenciómetro
@@RJEDITALL so if I am using a voltage regulator for a fan or motor to reduce speed,. Won't that heat up when working on low voltage...won't that damage the fan or motor?
The uploader of this project videos has not provided the gerber file for that project and if uploading videos without providing the gerber file no one should like that video, they are cheating us.
Wow. Very useful project ❤
Thank u 👌
hi i am Ramesh, above circuit is excellent,
Thanks for watching ❤️
Can the BTA41600B be replaced with the BTA41700B?
@@abdel-hadyelsayedshahin2364 you try
Magnífico, showwww de bola
Excellent work brother
@@ravibdwj2611 👍
Excelente trabalho professor 🙏🏼
Thanks for watching ❤️
Muito bom, vou fazer também 👏
Thank u, you make this ❤️
You have written 7000w so please test it with washing machine motor one time make video on it
2hp motor ran😢😢😢😢 अभी मजा आएगा ना बेडु दिखा
Thanks for this information.. useful
@@mazinjamal3705 welcome
Good project bro ❤
Thanks for watching ❤️
Good evening, when building the 7000w dimmer, you used any Diac - DIode AC switch, correct?
I used it and it didn't work, it burned!
Can you tell me exactly what value you used for the video dimmer? Thanks.
@@apolotico db3
Great 👍 working ❤
Thank you 👍
SUPER!!!👍👍👍
👌❤️
Nice bro❤😊
Thanks for the visit
Super 👍
@@murugavelsen ❤️
Perfect work welldone
Thanks for watching ❤️
nice" full watching idol
@@rarelectronicstv thank you for watching ❤️
Very good 👏
❤️🌹
Do you have an electronics store?
No bro
Obrigado pela ajuda
@@senzoireneirene7444 you welcome
Una pregunta de que valor es el Diodo Zener y el Nro. de parte del SCR. Gracias por tu video muy interesante.
@@henrymeza9831 I have not used zener diode
@@RJEDITALL DIAC -DB3
ليس ديود زنار انه دياك
Me pasaria lista de componentes muy bueno tu trabajo
Isme 415 volt Ac input de sakte hain kya, yeh circuit 415 ya 380 volts ko Veriable kar sakta hai kya please Reply sir.
@@NasirHussain-qy6mn yes, you try
Super sir
@@murugavelsen thank u ❤️
Do spikes form on the oscilloscope screen if the load is applied to the solar inverter?
@@qusaial-hajkareem9323 yes
@RJEDITALL What is the solution to cancel these spikes?
daria para colocar em um chuveiro eletrico também ? creio que sim kkkk,,,
@@EdsonFerreira not understand
🚿🚿🚿🚿 too brother or not
Hello,let me ask you pls,what type of insulator did you use between the triac and the metallic plate
sheet??
Mica heatsink insulation pad
@@RJEDITALL Thanks a lot dude!...may I use thermal paste instead of mica?for the heatsink may I use just an aluminuum blank?
Actually I did the whole circuit and it wont work at 230V ...I have exactly the same mini voltmeter and when I supply with power its blinking..
Ac motorlarda 100 v altına düşmeyin motoru yakarsınız motor sargıları düşük voltaj da rezistans gibi davranır
EXCELENTE PROYECTO, INGENIERO RJ PUEDO UTILIZAR BTA 152 800R EN SUSTITUCIÓN DE BTA 41600B
@@hectorguillermoflores2253 you try
7000 w max değerdir ve bir. Evin 9 kv olduğunu düşünürsek bu yüksek bir değer 7000 Watt kaldırabileceğini düşünmüyorum.
Could you please tell me the name of the transistor? I couldn't read it, it wasn't displayed on the screen!
Please check description
@@RJEDITALLthanks👍👌🙏
Can this dimmer circuit be used for a 3 amp (220 volt AC) fan motor?
@@مهدیجبیری yes, you can use up to 7000w load
@@RJEDITALL Will there be any problem if I use it for a long time?
Please name the mosfet that be used.. In this circuit.. 🙏
Please check description
Can this dimmer be used for converting 220v to 110 v for fan heater of 2000watt imported from USA?
@@zaheerahmad1183 yes, you can use
@RJEDITALL Thanks RJDITALL
Good...❤
❤️❤️
hello Is it possible to connect a 1 M ohm variable resistor to this circuit? How many K ohms is the constant resistance and how much is the power (watts)?
@@vidadiAsmetov you try
can ww use 500 k potentiometer
@@jrajhyd yes, you can use
Podria usar un router makita de 110vac con este circuito? Es una CNC, se puede?
Yes
@@RJEDITALL Muchas gracias por la pronta respuesta. Bendiciones a todos acá.
What are the components you used please specify them?
@@7gawzge7184 please check diagram in the video
Ok thank you bro. But one question is what does it mean "DOB" written for the blue(🔵) colored component in the diagram? @@RJEDITALL
@@7gawzge7184 Driver-on-Board
What is the référence for dob please
What is voltage output while potentiometer in initial stage?
Sir 110 volt 10 ampair transformer chala saktehain ??
@@CharubalaDas-i3i yes
Can I use this circuit for 110v ac 200w power amplifier?
Yes
hello RJ...i followed your circuit and made one myself...it is working but it has a hissing sound and it does not go all the way to zero volt ac...can you help fix these two issues of the hissing and not going to zero volts...thanks.
@@newvaper3794 check it well, minimum 5v to 250v, check your Regulator
How do I get results using 15k, 20k, 30k resistors? What happens after 10k? Please inform me.
@@sanaldunya3804 you can use 15k resistor
Please Sir , Can I use this Circuit to Dc regulation of around 48v , I mean that volts that come out of Energy Saver bulbs circuit board to its Led , that volts
@@smjjoseph1212I don't try with dc volt, you try
👍👍👍
❤️
This used for fan regulater????
Yes, you can use
Pls name all the components used here. Provide the circuit diagram?
Please check description
very very good
Thank u 🌹
Kalau membuat dimmer buat menurunkan voltase jenset 10kva,
Kompinen apa yg dibesarkan,karna saya ngejar HZ generator 55hz
@@TedjaArum-rz9wl ok, I will try
Sir is se 1500watt heater ko control kar sakate h sar batana
@@Rajeshkumar-k6v9p yes, 100%
Frequncy same rahsy gi ?
@@MuhammadAkbar-l1q same
I do this circuit but the volt down just 10 degree pls solve the problem
Check it well
Bonjour et pour un moteur d'une machine à laver ça marche aussi.
Yes, you can use Up to 4000 watt
❤🌷🌷❤
❤️🩹
Work thank
Thanks for watching ❤️
Can I use it directly with the heater?
Yes, you can use
Which traic are you using? Can't see the numbers and letters.
Could you do proyects to work with 120V please?
This circuit working with 110v to 220v ac
@@RJEDITALL perfect, but you have to say it, too many people likes your videos in the all Americas, it's just an advice, anyway keep doing great, but don't forget what I tell you, best regards.!!
@@joseramos3076 Keep up with the world. It gets easier. What is 110 volts??? Funny
Is pr ship wala 110 ac chal jahy ga
Yes
What is DIAC part number?
@@muruganp4287 dB 3
Can we use bta 41?
Yes
@@RJEDITALL bohat bohat shukrya
Welder machine working 135 amper 110 volt ??
Maximum 8000 watt
@@RJEDITALLOi AMIGO! Gostei muito do seu circuito, pois ele serve para diversas aplicações. Eu tenho um semelhante ao seu, mas como eu pretendia operar com uma corrente elevada, experimentei empregar dois TRIACs BTA41 em paralelo, ou seja, pino 1 com pino 1, pino 2 com pino 2 e pino G com pino G. O restante do circuito não foi alterado. Estou usando , já há algumas semanas, sem problemas.
What is DOB component
Please share the equivalent
Search on UA-cam, what is dob, you will found all details
3v DC LFP cell से 48v 1000watt की e-bike चलाई जा सकती है क्या
No
Resistor 10K berapa watt..?
@@MENCARI_ORANG_CERDAS 1/2w
@@RJEDITALL terima kasih jabawannya pak.. Saya akan subscribe.... ❤
@@RJEDITALLoh satu lagi.. Saya punya 10K 1/4W, bisa kah itu digunakan? Terima kasih..
@MENCARI_ORANG_CERDAS yes, you can use 1/4w resistor
The Transister and Zener values are not seen.
@@shehzadsaleem7159 not zener diode, dob3,
Ok ❤😊
❤️👌
عندي مشاية كهربائية تشتغل على 110vac
هل يمكن استخدام هذي الدئرة لتشغيله
بيانات المحرك 90vdc 8amp 4200rpm 1.5hp 1200watt
Yes, you can use
What is dob. And value?Please explain
Check in UA-cam, dob tutorial
Tengo un problema con mi circuito , hice y utilicé los mismo componentes, pero , en mi caso la tensión de entrada es de 220v y cuando intento regular la salida , hace picos de 300v y no se puede graduar mediante el potenciómetro
@@Neverv1ew check it well
This is voltage regulator right
Yes
@@RJEDITALL so if I am using a voltage regulator for a fan or motor to reduce speed,. Won't that heat up when working on low voltage...won't that damage the fan or motor?
@@sooraj1979tk no damage problem
Chto za tranzistor v opisanie ne napisal
regulator, please check all details in the video
7000 watt.....🤗...😛
@@ZahidHussain-cd2ul you try
Is there any other transistor instead of this 😊
No bro
pls transistor name
Sir hame dual phesh aa rahe to Usko kaise lagay ki ye kam kare
This circuit working with single phase
saludos cordiales , podrian informar que es ANY DOB , esta en los materiales que publica . Gracias
Yes, you can use any dob
Hii ser theq ser
U are most welcome for always support, always happy and healthy
Yes keren
❤️🩹
Por que não testaste num ventilador ? Se testar, o ventilador poderá apresentar aquele zumbido... tipo: 60htz ?
You try
The uploader of this project videos has not provided the gerber file for that project and if uploading videos without providing the gerber file no one should like that video, they are cheating us.
need to electric Current supply
❤️
Oke componen example I am formola
Clear not understand
What is power in
Imean how much volat enter to give me 220volt
110-250v ac input, you can use
Input 300 volt pe kam karega?
@@RJEDITALLinput 300 volt pe kam karega
@@atanumete6903 yes
Triac no please
dB3
Sorry input how voltge
AC 110-250v